Stepper Motors

Filter  
Manufacturer  
Unit of Measure  
Price  
View as List Grid

Items 25-48 of 70

Page
per page
Set Descending Direction
  1. Oriental Motors - PH266-01-C11 - Motor, stepper. 6VDC 1.2Amp 1.8 Degree/Step 2PH.
    Oriental Motors - PH266-01-C11 - Motor, stepper. 6VDC 1.2Amp 1.8 Degree/Step 2PH.
    $59.95
    Motor, stepper. 6VDC 1.2Amp 1.8 Degree/Step 2PH. Vexta. Mount: Panel. Flange 2.225" square with four holes at 2.575" centers (each 1.86" each spacing). Dimensions overall 2.236" D round x 2.204" high, plus 1/4" D shaft 0.74" long. Note: Shaft has one side flattened. 6 Wire. Weight: 1.14 lbs. Learn More
  2. HURST - 3007-001 ABS - 12VDC 6-wire 15-degree Stepper
    HURST - 3007-001 ABS - 12VDC 6-wire 15-degree Stepper
    $58.95
    12VDC 4.25W 6-lead Bifilar 15-degree Stepper Model #ABS Part #3007-001 Reduction: DD - Volts: 12DC Step Angle: 15-degrees. Mounts with two holes on 2.38" centers, pear shaped gear cup Instrument Motor 0.125" shaft half an inch long. Some instructions supplied. Learn More
  3. FDK - E02A1ZD - Stepper Motor 4-Wire very thin 42x14mm
    FDK - E02A1ZD - Stepper Motor 4-Wire very thin 42x14mm
    $5.95
    42mm dia x 14.5mm thick, 2.9mm shaft 11mmL with 6.2mm 10-tooth brass Gear 4-hole plate, 35mm centers Stepper Motor 4-Wires, 19"long very thin 3.6oz Learn More
  4. Eastern Air Devices - LA23BCK-47 - 6VDC 1.8degree 4-Ph 6-wire Stepper
    Eastern Air Devices - LA23BCK-47 - 6VDC 1.8degree 4-Ph 6-wire Stepper
    $69.95
    6VDC 1.25Amp 1.8degree 4-Phase 6-teflon 15"wires Stepper Motor 2.25"D x 3.0"L 4-hole mounting 1.85" spacing 0.25"D shaft 0.75"L New, Old Stock weighs 2-pounds Learn More
  5. ARC SYSTEMS - 2015-02 - 204239 - Arcustep 24VDC Stepper Motor
    ARC SYSTEMS - 2015-02 - 204239 - Arcustep 24VDC Stepper Motor
    Special Price $18.98 Regular Price $28.95

    ARC SYSTEMS - 2015-02 - 204239 - Arcustep 24VDC

    Step Angle 15 Deg

    4 Wire Stepper 

    Smoth Ball Bearing Shaft Support

    Servo-Mount 50.7mm Diameter x 75mm Long

    Plus 11.1mm Diameter Worm Gear 111mm Long - 6.7mm diameter shaft 9.3mm Long at rear.

    Four Wire Teflon Leads.

    Measured Resistance is either 20 or 40-Ohms fron one wire to any other wire

    New Old Stock

    Made in USA

    Learn More
  6. Applied Motion Products Inc - 5023-169D - Motor, stepper. Dual shaft, 8 Wire.
    Applied Motion Products Inc - 5023-169D - Motor, stepper. Dual shaft, 8 Wire.
    $49.00
    Motor, stepper. Dual shaft, 8 Wire. Max phase current: Series 1.70Amp Parallel 3.40Amp. Mount: Panel, 47mm centers. Body: 56mm D x 141mm long. Shaft(s) 6.4mm D x 19mm long. Weight: 2.9 lbs. Learn More
  7. AIRPAX - A82352-M3 - 18deg 1.5-In-Oz 42mm 4-wire
    AIRPAX - A82352-M3 - 18deg 1.5-In-Oz 42mm 4-wire
    $5.95
    Stepper, 18 Deg/Step, 1.5 in-oz, 4 wires, Mounting 2 holes 42mm apart, Body 37x50x20mm thick, Shaft 2x8mm with4.6mm gear,2.6 oz, 4.6mm 10-toothGear. Learn More
  8. Japan Servo Co.  - KH42HM2-852 - 1.8 Degree Nema 17 Stepper Motor
    Japan Servo Co. - KH42HM2-852 - 1.8 Degree Nema 17 Stepper Motor
    Special Price $24.98 Regular Price $86.50 As low as $19.98
    IN STOCK - MORE THAN 500 READY TO SHIP!

    Japan Servo Motors - KH42HM2-852 - 1.8 Degree 2 Phase Hybrid Stepping Motor

    Commerical Quality KH42 Series 800 Type High efficiency, High Torque, Low Vibration and Low Noise Motor.

    Much improved quality and performance over the chinese Nema 17 Stepper Motors on Amazon & Ebay! Very nice upgrade for 3D printers at a great price!

    This new series 800 type, which maintains the high torque performance of our conventional 500 Type and lower vibration and noise. High efficiency and high torque have been achieved through our intensive research on magnetic circuitry. A unique  tooth profile has been employed through the development of a new  proven theory to achieve low vibration and low noise. 

    Specifications 

    NEMA 17

    Drive Method - Uni-Polar 6 Wire

    Bearing Description

    • NMB Precision Radial Deep Groove Ball Bearings (R-1650HH)
    • D: 5 mm (I.D.); D: 16 mm (O.D.); B: 5 mm (Width).
    • Shielding: ZZ - Double sided metal shielding.
    • The ZZ shielding protects the bearing against samll particles and dust while eliminating any drag usually associated with rubber sealed bearings.
    • High quality and industrial precision. Made from world class materials to ensure durability and a long life.
    • Excellent for motors, machines, tools

    Step Angle - 1.8 Degrees/step

    Voltage - 24 Volts 

    Current - 0.38 Amps/Phase

    Winding Resistance - 22.4 Ohms/Phase

    Inductance - 21.5 mH/Phase

    Holding Torque - 2.0 kgf cm (28 ounce inch)

    Detent Torque - 150 gf cm (2.1 ounce inches)

    Rotor Inertia - 42 g cm2 (0.23 ounce inches)

    Weight -  260 g (0.57 Lbs.) 

    Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)

    Insulation resistance  500 VDC 100Mohm min.

    Dielectric Strength - 500 VAC 50 Hz 1 minute

    Operating Temperature Range 0 - 50C

    Allowable Temperature Rise 70 degrees

    Dimensions 1.65" X 1.65"  X  1.34" (42mm X 42mm X 34 mm Max) 

    Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.

    NEMA 17

    Drive Method - Uni-Polar 6 Wire

    Bearing Description

    • NMB Precision Radial Deep Groove Ball Bearings (R-1650HH)
    • d: 5 mm (I.D.); D: 16 mm (O.D.); B: 5 mm (Width).
    • Shielding: ZZ - Double sided metal shielding.
    • The ZZ shielding protects the bearing against samll particles and dust while eliminating any drag usually associated with rubber sealed bearings.
    • High quality and industrial precision. Made from world class materials to ensure durability and a long life.
    • Excellent for motors, machines, tools

    Step Angle - 1.8 Degrees/step

    Voltage - 24 Volts 

    Current - 0.38 Amps/Phase

    Winding resistance - 22.4 Ohms/Phase

    Inductance - 21.5 mH/Phase

    Holding Torque - 2.0 kgf cm (28 ounce inch)

    Detent Torque - 150 gf cm (2.1 ounce inches)

    Rotor Inertia - 42 g cm2 (0.23 ounce inches)

    Weight -  260 g (0.57 Lbs.) 

    Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)

    Insulation resistance  500 VDC 100Mohm min.

    Dielectric Strength - 500 VAC 50 Hz 1 minute

    Operating Temperature Range 0 - 50C

    Allowable Temperature Rise 70 degrees

    Dimensions 1.65" X 1.65"  X  1.34" (42mm X 42mm X 34 mm Max) 

    Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.

    ApplicatIons: RobotIcs,  3D Printer,  Arduino,  CNC,  Router.

     

     

    Learn More
  9. SUPERIOR ELECTRIC CO. - M111-FF-206 - Slo-Syn Stepper 3.5VDC 760-In-oz
    SUPERIOR ELECTRIC CO. - M111-FF-206 - Slo-Syn Stepper 3.5VDC 760-In-oz
    $367.88
    Motor, Slo-Syn Stepper, Bipolar. Supply: 3.5VDC. N/P Current: 5.0A. Winding Res.: 0.7-ohms 9.2mHy. Steps: 200 steps/Rev. Torque: 760 Oz-In. Direction: Reversible. Wire count: 4 terminals. Mech. Mtg.: NEMA 42. Body Dimensions: 110mm frame. Ratings are for series connections. Used. Learn More
  10. SUPERIOR ELECTRIC CO. - KLM093F10C5 - Slo-Syn Stepper 1.8degree 3.2VDC
    SUPERIOR ELECTRIC CO. - KLM093F10C5 - Slo-Syn Stepper 1.8degree 3.2VDC
    $468.95
    Motor, Slo-Syn Stepper with Encoder. Supply: 3.21VDC. N/P Current: 5.1A. Steps: 200 steps/Rev. 3-Stack. Winding Res.: 0.629-ohms 8.31mHy. Torque: 1155 Oz-In [816Ncm]. Motor Wire count: 4 wire leads. Encoder wire count: 8-wires. Body Dimensions: 85mm/3.53"square x 6.25"L. NEMA 34. Shaft: 0.50"D flatted shaft 1.1"L. 9 lbs. Used as demonstration model only, no marks on mounting face plate. Learn More
  11. SUPERIOR ELECTRIC CO. - KMT092F07 - Motor, stepper. Slo-Syn 770-Oz-In 1.8degree
    SUPERIOR ELECTRIC CO. - KMT092F07 - Motor, stepper. Slo-Syn 770-Oz-In 1.8degree
    $249.88
    Motor, stepper. Slo-Syn. Supply: 3.48VDC. N/P current: 3.25A. Winding res.: 1.07-ohms, 11.2mHy. Torque: 770-Oz-In [554Ncm]. Wire count: 4 wire leads. Weight: 7 lbs. Used. Learn More
  12. SUPERIOR ELECTRIC CO. - M172-FF-401 - Slo-Syn Stepper 2.6VDC 2,000-In-Oz
    SUPERIOR ELECTRIC CO. - M172-FF-401 - Slo-Syn Stepper 2.6VDC 2,000-In-Oz
    $532.89
    Motor, Slo-Syn Stepper, Bipolar. Supply: 2.6VDC. N/P Current: 4.0A. Winding Res.: 0.65-ohms 14.6mHy. Steps: 200 steps/Rev. Torque: 2000 / 1200-Oz-In. Direction: Reversible. Wire count: 4 terminals. Mech. Mtg.: NEMA 66. Body Dimensions: 165mm frame. SPEC.A213803. Ratings are for bipolar connections. Learn More
  13. SUPERIOR ELECTRIC CO. - M092-FF-413C5006 - SloSyn synch 3.47VDC, 2Amp plus encoder.
    SUPERIOR ELECTRIC CO. - M092-FF-413C5006 - SloSyn synch 3.47VDC, 2Amp plus encoder.
    $189.00
    Motors, stepper. SloSyn synchronous 3.47VDC, 2Amp, 200S/R. Hold: 325 oz in. Attached encoder 220022/219273, 500PPR with a DB9 female connector.Motor case: mount 3-1/4" square with 3-3/4" mt ctrs x 4-5/8" long body. Shaft: 0.380" D x 1-1/8" long. Connections: 4 conductor foil shieled cable plus ground wire. Learn More
  14. SUPERIOR ELECTRIC CO. - M062-CE04 - Motors, stepper. 4.2V, 1.9Amp, 200S/R.
    SUPERIOR ELECTRIC CO. - M062-CE04 - Motors, stepper. 4.2V, 1.9Amp, 200S/R.
    $159.00
    Motors, stepper. 4.2V, 1.9Amp, 200S/R, Hold: 100 oz in. 64Deg rise. NEMA 23, 2-stack. Case: 2-3/16" square mount with 2-1/2" ctrs. 1/4" shaft x 3/4" long.Connections; 8 pin male header with mating female socket included. Learn More
  15. SHINANO KENSHI - STH-39D249 - 1.8Deg 7.1-ohm 6-wire Mini-Stepper
    SHINANO KENSHI - STH-39D249 - 1.8Deg 7.1-ohm 6-wire Mini-Stepper
    Special Price $28.98 Regular Price $38.50
    READY TO SHIP - ONLY 2 LEFT IN STOCK!

    SHINANO KENSHI - STH-39D249 - 6 Wire Stepper Motor.

    Status: Discontinued

    Dimensions: 39mm Square x 37mmD.

    NEMA Size 14

    4.7mm Flatted Shaft 24mmL.

    1.8 Degree per Step

    7.1-Ohm Coils

    6-long Wires.

    New

    Made in Japan

    Learn More
  16. N.A. PHILIPS - K82924-M2 - Stepper Motor 5V 0-150PPS REV 0-375 RPM
    N.A. PHILIPS - K82924-M2 - Stepper Motor 5V 0-150PPS REV 0-375 RPM
    $12.95
    STEPPER MOTORS REV 5V 1AMP 0-150PPS REV 0-375 RPM 8-wire mounted on L-shaped bracket 4.235 x 3 x 2"D double flats on 6.7mm 1/4" shaft12mm long 70mm dia x 43mm deep 2-poundsRemoved from equip. Learn More
  17. FUJI ELECTRIC - SM35-2006B - Motor, stepper. 13VDC 4-wire 35mmD
    FUJI ELECTRIC - SM35-2006B - Motor, stepper. 13VDC 4-wire 35mmD
    Special Price $7.98 Regular Price $15.95
    READY TO SHIP - ONLY 56 LEFT IN STOCK!

    FUJI ELECTRIC - SM35-2006B Motor, stepper.

    Supply: 13VDC.

    Coil Resistance: 38 ohm.

    Direction: Reversible.

    Wire Count: 4-Wire.

    Mech. Mtg: Slotted Flange with two slots 42mm spacing

    Body Dimensions: 35mm dia x 21mm deep.

    Shaft: 1.9mmD 7.5mmL.

    Note: Fuji Electrochemical Co - Japan.

    Learn More
  18. SUPERIOR ELECTRIC CO. - SS25-1138 - Motor, stepper. Slo-Syn 120VAC 0.1Amp.
    SUPERIOR ELECTRIC CO. - SS25-1138 - Motor, stepper. Slo-Syn 120VAC 0.1Amp.
    $19.00
    Motor, stepper. Slo-Syn 120VAC 0.1Amp 1000RPM 2.0 OZ In. Dimensions: 2.224" square base with 2.5" mount centers. Used/Removed from equipment. Learn More
  19. SUPERIOR ELECTRIC CO. - M061-FD02 - Motor, stepper. Slo-syn 5V 1Amp, 1.8Deg.
    SUPERIOR ELECTRIC CO. - M061-FD02 - Motor, stepper. Slo-syn 5V 1Amp, 1.8Deg.
    $75.00
    Motor, stepper. Slo-syn synchronous 5V 1Amp, 200 S/R = 1.8-degree, 35 oz in. Four (4) hole-mounting, about 46.4mm [1.84"] on 56.6mm [2.23"] plate. Shaft: 0.25", 0.75mm long. Dimensions: 56.7mm D x 52.2mm deep (2.3" D x 2"). Learn More
  20. PACIFIC SCIENTIFIC - E33NLEC-LNF-NS-01 - 65VDC 5.5A 1.8deg Bipolar 4-wire STEPPER, NEMA 34
    PACIFIC SCIENTIFIC - E33NLEC-LNF-NS-01 - 65VDC 5.5A 1.8deg Bipolar 4-wire STEPPER, NEMA 34
    Special Price $198.98 Regular Price $450.00

    PACIFIC SCIENTIFIC - E33NLEC-LNF-NS-01 Motors, Stepper. NEMA 34

    Status: Discontinued

    Bipolar series 65VDC 5.5Amp 202W 1500RPM

    1.8DEG/STEP.

    Power: 202W.

    Dimensions: 86mm D x 155mm deep, 9.6 x 30mm flatted inside thread shaft.

    Mounting 70mm centers on 86mm square flange.

    Weight: 8.3 lbs.

    Additional Information: https://www.artisantg.com/info/Pacific_Scientific_Step_Motors_Datasheet.pdf

    Proudly Made in USA

    New old Stock

    Learn More
  21. Oriental Motors - PH268-01 - Stepper motor. 5.4V 1.5Amp 1.8 Deg/Step.
    Oriental Motors - PH268-01 - Stepper motor. 5.4V 1.5Amp 1.8 Deg/Step.
    Special Price $89.98 Regular Price $149.95
    Stepper motor. 5.4V 1.5Amp 1.8 Deg/Step. PP6. 6 Wire. Mount: Panel/Flange: 2.220" (56.4mm) square. 4 Hole mount with 2/5/8" centers. Dimensions: 2.224" (56.4mm) D x 3.046" (77.3mm) long, plus shaft. Shaft: 1/4" x 0.75" long. Learn More
  22. HURST - SP2953 Model AS – Pear Shaped Geared Motor, Stepper. 12VDC 3 Watt.
    HURST - SP2953 Model AS – Pear Shaped Geared Motor, Stepper. 12VDC 3 Watt.
    Special Price $18.98 Regular Price $28.95
    READY TO SHIP - ONLY 7 LEFT IN STOCK!
    Hurst - SP 2953 – Pear Shaped Geared Stepper Motor. Voltage: 12VDC Power: 3 Watt. Insulation Class A 105C Operating Temperature: -10C to 40 C Ambient Gear Housing: Die Cast with Hardened Gears Gear Reduction of 20:1 w/Sleeved Bearing Dimensions: Body 2.812” X 2.187” X 1.625” Shaft Diameter: 0.1874” Diameter Note: Used / Removed from Equipment Made in USA Learn More
  23. Eastern Air Devices - LA23ECH-28 - Stepper motor. 1.8 Deg/Step. New
    Eastern Air Devices - LA23ECH-28 - Stepper motor. 1.8 Deg/Step. New
    Special Price $24.98 Regular Price $36.95
    Eastern Air Devices - LA23ECH-28 - Stepper motor. 1.8 Deg/Step. New Stepper Motor. 2 Phase 1.4VDC 1.9Amp 1.8 Deg/Step. With pulley on 1/4" shaft 20mm long (57.3mm D x 52.2mm tall with pulley overall is 71.6mm tall). Oval mount 66.5mm centers. Motor has 4-Conductor 12" wire leads. Eastern Air Devices. Weight: 1.2-pounds. New Old Stock Learn More
  24. Eastern Air Devices - LA23ECS-36 - 1.9VDC 1.8deg/step 2-Ph 4-wire Stepper
    Eastern Air Devices - LA23ECS-36 - 1.9VDC 1.8deg/step 2-Ph 4-wire Stepper
    Special Price $54.98 Regular Price $85.00

    Eastern Air Devices - LA23ECS-36 - Stepper Motor

    1.9VDC 2 Phase 3Amp 1.8 DEG.

    Stepper Motors 4-Wire

    Dimensions: 57mm Dia x 52mm deep plus additional 6.3mm [1/4"] Shaft 18mmL.

    Nema 23

    IP40

    Weight 18oz.

    Motor has a 7" long 4-Cond wire and connector.

    Square Mount 47mm Ctrs.

    Genuine Eastern Air Devices - New Old Stock

    Made in USA

    Learn More
View as List Grid

Items 25-48 of 70

Page
per page
Set Descending Direction
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.