Stepper Motors
- SUPERIOR ELECTRIC CO. - M063-FD09C2 - SLO-SYN Stepping Motor. 2.25VDC 4.6A 100-Oz-InSpecial Price $169.98 Regular Price $180.00
SUPERIOR ELECTRIC CO. - M063-FD09C2 - Motor, Stepper.
Supply: 2.25VDC 4.6A.
SLO-SYN Synchronous Stepper.
Nema Frame 23
Torque: 100-Oz-In.
Inertia: 0.11 Lb in2
Direction: Reversable, 200 Steps per Revolution.
Wire Count: 6-Wires, Wired to Connector.
Dual Shaft.
New Old Stock
Learn More - SUPERIOR ELECTRIC CO. - KMT091F05E - Motor, Stepper, Dual-shaft 3V 2.7A NEMA34D$195.00Motor, Stepper, Dual-shaft. Supply: 3.0VDC 2.7A. Steps: 200 steps per rev. Direction: Reversable. Wire count: Long wire cable to Internal-connections 4-terminal. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.36" [85mm] square x 6.2" [158mm] with both shafts, One 0.50"D double flat and one 0.375"D keyed. Connect per 213803. Weight: 5 lbs. Two-phase, single stack. Learn More
- SUPERIOR ELECTRIC CO. - M091-FF-206T - Motor, Stepper, Slo-Syn. Supply: 3.0V$124.95Out of stockMotor, Stepper, Slo-Syn. Supply: 3.0V. Current: 3.0A. Winding Res. 1-ohm 10.4mHy. Torque: 180 Oz-In Holding. Wire count: 4 leads. Frame Size: 90mm. Mech. Mtg. NEMA 34D. SPEC. A213803. Learn More
- SUPERIOR ELECTRIC CO. - M091-FF-206ET - Motor, stepper. Slo-Syn. Supply: 3.0V$124.95Motor, stepper. Slo-Syn. Supply: 3.0V. Current: 3.0A. Torque: 180 Oz-in holding. Dual shaft SPEC.A213803. NEMA34D. Learn More
- PACIFIC SCIENTIFIC - E33NRHT-LNF-NS-00 - 65VDC 176W 1500-RPM 5.1A, NEMA 34 Hybrid Bipolar Parallel Stepper MotorSpecial Price $169.98 Regular Price $285.00
PACIFIC SCIENTIFIC - E33NRHT-LNF-NS-00 65V 5.1A NEMA 34 Hybrid Bipolar Parallel Stepper Motor
Danaher Motion
Status: Discontinued
Po:176W 5.1A BIPOLAR PARALLEL
1.8DEG/STEP
9.6mm flatted shaft [with threaded hole in end] x 29mmL
STEPPER MOTOR 86mm dia x 128mmD 80mm mounting flange, 69mm centers
Note: One has a Pulley attached
New Old stock
9 Lbs.
Additional Information: https://www.artisantg.com/info/Pacific_Scientific_Step_Motors_Datasheet.pdf
Proudly Made in USA
Alternate: 10-16976
- SUPERIOR ELECTRIC CO. - M092-FF-413C5006 - SloSyn synch 3.47VDC, 2Amp plus encoder.$189.00Motors, stepper. SloSyn synchronous 3.47VDC, 2Amp, 200S/R. Hold: 325 oz in. Attached encoder 220022/219273, 500PPR with a DB9 female connector.Motor case: mount 3-1/4" square with 3-3/4" mt ctrs x 4-5/8" long body. Shaft: 0.380" D x 1-1/8" long. Connections: 4 conductor foil shieled cable plus ground wire. Learn More
- SUPERIOR ELECTRIC CO. - M062-CE04 - Motors, stepper. 4.2V, 1.9Amp, 200S/R.$159.00Motors, stepper. 4.2V, 1.9Amp, 200S/R, Hold: 100 oz in. 64Deg rise. NEMA 23, 2-stack. Case: 2-3/16" square mount with 2-1/2" ctrs. 1/4" shaft x 3/4" long.Connections; 8 pin male header with mating female socket included. Learn More
- PACIFIC SCIENTIFIC - E33NLEC-LNF-NS-01 - 65VDC 5.5A 1.8deg Bipolar 4-wire STEPPER, NEMA 34Special Price $198.98 Regular Price $450.00
PACIFIC SCIENTIFIC - E33NLEC-LNF-NS-01 Motors, Stepper. NEMA 34
Status: Discontinued
Bipolar series 65VDC 5.5Amp 202W 1500RPM
1.8DEG/STEP.
Power: 202W.
Dimensions: 86mm D x 155mm deep, 9.6 x 30mm flatted inside thread shaft.
Mounting 70mm centers on 86mm square flange.
Weight: 8.3 lbs.
Additional Information: https://www.artisantg.com/info/Pacific_Scientific_Step_Motors_Datasheet.pdf
Proudly Made in USA
New old Stock
Learn More - SUPERIOR ELECTRIC CO. - M062-FC09E - Motor, stepper. Slo-syn 1.65VDC 4.7A.$195.00Out of stockMotor, stepper. Slo-syn synchronous 1.65VDC 4.7Amp, 200 S/R = 1.8 degree. Hold 100-In-Oz. Dual-shaft 6.7mm x {two} 18.9mm 0.75". Dimensions: 2.25" D x 4.5" long including 1/4" shafts. 6 wire, 46.6mm centers on 51.5mm square plate. Learn More
- Oriental Motors - PH268-21M2 - Motors, stepper. 2-PH 5.4VDC 1.5A 1.8 Deg/Step$133.00Motor, stepper. Supply: 5.4VDC 2-Phase. N/P Current: 1.5A. Steps: 1.8 degree. Weight: 2.8 lbs. With magnetic brake DC24V 0.17Amp. Learn More
- Oriental Motors - PH299-02 - Motor, steper. 6VDC 2Amp 1.8 Deg/Step.Special Price $129.98 Regular Price $185.95Motor, steper. 6VDC 2Amp 1.8 Deg/Step. 6 Wire. Learn More
- Superior Electric - M093-FD11 - Motor, stepper SLO-SYN. 2.64V 6-wire 450-Oz-In.$139.00Out of stock
Motor, stepper SLO-SYN. Supply: 2.64VDC. 5.5A. Steps: 200 steps / revolution. Torque: 450-Oz-In Holding. Direction: reversible. Wire count: 6 wires. Mech. Mtg: 4 holes 70mm spacing. Body Dimensions: 86mm D x 132mm L plus shaft. 10mm D. Class B insulation, 65degC. Weight: 8 lbs. Note: This motor is 9 lbs packed and will require additional shipping funds above the $9.90 USD the website will attached to any order.
Learn More - Parker Compumotor Corp - CPL57-120 - Stepping Motor. 130-In-Oz, 3600 RPM, Dual Shaft.Special Price $139.98 Regular Price $185.00READY TO SHIP - ONLY 1 LEFT IN STOCK!
Parker Compumotor Corp - CPL57-120 Stepping Motor.
RS-232 driven 50-150VDCpeak - 20kHz PWM
Max. Continuous Speed: 3600RPM.
Torque (Continuous): 130 in-oz, Torque (Peak): 160 in-oz
Rottor Inertia: 0.0042 oz-in-sec2
Dual 1/4" shafts 0.75" long.
Motor Weight: 3.2 lbs.
Connectors: One 5 Pin male and One 6 position female circular connectors.
Mount: Flange 2.25" x 2.25", with 4 (.205") holes at 2.625" bolt circle.
Body Dimensions: overall 2.250" side x 3.362" deep x 4.750" high, plus dual shafts.
Note: Used/Removed from equipment. Motor Only - Good Condition.
Made in USA.
Additional Information: https://www.parkermotion.com/manuals/cplus/CPLUS_Analog_1-5.pdf