Stepper Motors

Filter  
  1. Price $15.00 - $40.00 Remove This Item
Clear All
Manufacturer  
Unit of Measure  
Price  
View as List Grid

18 Items

per page
Set Descending Direction
  1. PORTESCAP - GC26M048A30V - Motor, Stepper. 5V, 10:1 gear box, 4 Phase 6 wire.
    PORTESCAP - GC26M048A30V - Motor, Stepper. 5V, 10:1 gear box, 4 Phase 6 wire.
    Special Price $16.98 Regular Price $22.95 As low as $10.98
    IN STOCK - MORE THAN 100 READY TO SHIP!

    PORTESCAP - GC26M048A30V Motor, Stepper.

    Tiny 5V miniature, with heavy 10:1 gear box.

    4-Phase 6-wire UniPolar,

    Dimensions:only 1.1" [28mm] x 1.43" [36.2] x 1" [25.4]

    Shaft: 3mm knurled shaft 7.5mm long.

    Mounts on two threaded holes on 30mm centers.

    RoHS Compliant.

    Note: Danaher / Portescap.

    Weight: 1.8 oz.

    Learn More
  2. Siemans AIRPAX - L82401-P2 - Permanent Magnet Stepper Motor, 12VDC 52 Ohm, 7.5 Degree Step Angle.
    Siemans AIRPAX - L82401-P2 - Permanent Magnet Stepper Motor, 12VDC 52 Ohm, 7.5 Degree Step Angle.
    Special Price $18.98 Regular Price $26.95 As low as $12.98

    Siemans Airpax - L82401-P2 Motor, Stepper.

    Commercial Series High quality Permanent Magnet Stepper Motor with 7.5 degree step angle. The motors may be fitted to a gearhead where increased torque and resolution are required at reduced operating speed. Four phase motor suitable for use with uni-polar drive circuits. Ideally suited to instrumentation applications.

    DC Operating Voltage: 12VDC

    Resistance per Winding 52 ohm.

    Steps per Revolution: 48 

    Resistance per Coil: 9.1 Ohm 

    Step Angle: 7.5 degrees.

    Connections: 6 Wires

    Holding Torque: 4.5 Ncm

    Mounting: 1-3/8" Hole Spacing.

    Rotor Inertia: 0.0118 Kgcm2

    Current per Phase: 0.16 Amp

    Inductance per Phase: 37.7 mH

    Max. Operating Temperature: 100 C

    Ambient Operating Temperature: -20 C to 70 C

    Bearing Type: Sintered Bronze Sleeve

    Body: 42mm Diameter.

    Shaft: 3mm Diameter x 9.6mm Long.

    Mount Plate, 4 holes, 35mm centers.

    Weight: 4.8 oz.

    Made in Malaysia

    New Old Stock

     

    Learn More
  3. SUPERIOR ELECTRIC CO. - SLO-SYN - MP70-1A-A4-9Z-025 - Motor, stepper. 15V 4 phase 0.49Amp.
    SUPERIOR ELECTRIC CO. - SLO-SYN - MP70-1A-A4-9Z-025 - Motor, stepper. 15V 4 phase 0.49Amp.
    Special Price $16.98 Regular Price $24.95
    READY TO SHIP - ONLY 44 LEFT IN STOCK!

    Motor, stepper. 15V 4 phase 0.49Amp. 48 step/rev. 8 wires.

    The SLO-SYN motor is unique in that it has the capability of being operated as an AC synchronous, constant speed motor or as a phase switched DC stepper motor. In either case, it is classified as a permanent magnet inductor motor.

    Danaher Motion - SLO SYN product line is not out of manufacture. 

    Mounting: 2.2" hole spacing.

    Body: 2.75" square (70.5mm) x 1.75" high (46mm).

    Shaft: 1/4" D x 0.63" L.

    Weight: 1.3 lbs (22 oz).

    Note: Slo-Syn.

    Very compact for amount of torque. 8-wire = 4-phase = Unipolar.

    Made in USA

    Learn More
  4. SUPERIOR ELECTRIC CO. - SLO-SYN - MP70-9A-Z9-9Z-017 - Motor, Stepping. 5.2VDC 1.44Amp.
    SUPERIOR ELECTRIC CO. - SLO-SYN - MP70-9A-Z9-9Z-017 - Motor, Stepping. 5.2VDC 1.44Amp.
    Special Price $18.98 Regular Price $24.50 As low as $14.98
    IN STOCK - MORE THAN 100 READY TO SHIP!

    SUPERIOR ELECTRIC CO. - SLO-SYN - MP70-9A-Z9-9Z-017 Synchronous Stepping Motor, 5.2VDC 1.44Amp. 48 step/rev.

    Superior Electric is recognized worldwide as the leading manufacturer of step motor positioning systems. Over 40 years ago, Superior Electric developed and patented their SLO-SYN® Step Motor products.

    The SLO-SYN motor is unique in that it has the capability of being operated as an AC Synchronous, constant speed motor or as a phase switched DC stepper motor. In either case, it is classified as a permanent magnet inductor motor.

    Status: Danaher Motion - This SLO-SYN P/N is Discontinued.

    Slo-Syn. 8-Wire 4-Winding.

    Rating: 5.2 V@1.44 Amps

    48 Steps per Revolution

    Very High Torque.

    Bobbin Wound Stepping Motor. Patent 4,349,957

    Mounting: 2.28" Hole Spacing.

    Body: 2-3/4" D x 1.7" L.

    Shaft: 0.25" Diameter w/flat 0.6" Length

     2.75" Square Mounting Plate with 4 holes with Threaded inserts, about 2.28" apart.

    Very compact for amount of torque. 8-wire = 4-phase = Unipolar.

    Weight: 1.5 lb (23 oz).

    New Old Stock

    Made in Japan

    Learn More
  5. SUPERIOR ELECTRIC CO. - 215851-008 - Cords & Plug sets. For Slo-Syn motors.
    SUPERIOR ELECTRIC CO. - 215851-008 - Cords & Plug sets. For Slo-Syn motors.
    $29.95
    Cords & Plug sets. For Slo-Syn motors. I/O Cable for Slo-Syn motors. BCD I/O cable, 25 pin D, 10 foot (3 meters). Learn More
  6. SUPERIOR ELECTRIC CO. - 215851-007 - Cords & Plug sets. For Slo-Syn motors.
    SUPERIOR ELECTRIC CO. - 215851-007 - Cords & Plug sets. For Slo-Syn motors.
    $34.95
    I/O Cable for Slo-Syn motors. BCD I/O cable, 25 pin D, 5 foot (1.5 meters). Learn More
  7. ARC SYSTEMS - 2015-02 - 204239 - Arcustep 24VDC Stepper Motor
    ARC SYSTEMS - 2015-02 - 204239 - Arcustep 24VDC Stepper Motor
    Special Price $18.98 Regular Price $28.95

    ARC SYSTEMS - 2015-02 - 204239 - Arcustep 24VDC

    Step Angle 15 Deg

    4 Wire Stepper 

    Smoth Ball Bearing Shaft Support

    Servo-Mount 50.7mm Diameter x 75mm Long

    Plus 11.1mm Diameter Worm Gear 111mm Long - 6.7mm diameter shaft 9.3mm Long at rear.

    Four Wire Teflon Leads.

    Measured Resistance is either 20 or 40-Ohms fron one wire to any other wire

    New Old Stock

    Made in USA

    Learn More
  8. Japan Servo Co.  - KH42HM2-852 - 1.8 Degree Nema 17 Stepper Motor
    Japan Servo Co. - KH42HM2-852 - 1.8 Degree Nema 17 Stepper Motor
    Special Price $24.98 Regular Price $86.50 As low as $19.98
    IN STOCK - MORE THAN 500 READY TO SHIP!

    Japan Servo Motors - KH42HM2-852 - 1.8 Degree 2 Phase Hybrid Stepping Motor

    Commerical Quality KH42 Series 800 Type High efficiency, High Torque, Low Vibration and Low Noise Motor.

    Much improved quality and performance over the chinese Nema 17 Stepper Motors on Amazon & Ebay! Very nice upgrade for 3D printers at a great price!

    This new series 800 type, which maintains the high torque performance of our conventional 500 Type and lower vibration and noise. High efficiency and high torque have been achieved through our intensive research on magnetic circuitry. A unique  tooth profile has been employed through the development of a new  proven theory to achieve low vibration and low noise. 

    Specifications 

    NEMA 17

    Drive Method - Uni-Polar 6 Wire

    Bearing Description

    • NMB Precision Radial Deep Groove Ball Bearings (R-1650HH)
    • D: 5 mm (I.D.); D: 16 mm (O.D.); B: 5 mm (Width).
    • Shielding: ZZ - Double sided metal shielding.
    • The ZZ shielding protects the bearing against samll particles and dust while eliminating any drag usually associated with rubber sealed bearings.
    • High quality and industrial precision. Made from world class materials to ensure durability and a long life.
    • Excellent for motors, machines, tools

    Step Angle - 1.8 Degrees/step

    Voltage - 24 Volts 

    Current - 0.38 Amps/Phase

    Winding Resistance - 22.4 Ohms/Phase

    Inductance - 21.5 mH/Phase

    Holding Torque - 2.0 kgf cm (28 ounce inch)

    Detent Torque - 150 gf cm (2.1 ounce inches)

    Rotor Inertia - 42 g cm2 (0.23 ounce inches)

    Weight -  260 g (0.57 Lbs.) 

    Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)

    Insulation resistance  500 VDC 100Mohm min.

    Dielectric Strength - 500 VAC 50 Hz 1 minute

    Operating Temperature Range 0 - 50C

    Allowable Temperature Rise 70 degrees

    Dimensions 1.65" X 1.65"  X  1.34" (42mm X 42mm X 34 mm Max) 

    Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.

    NEMA 17

    Drive Method - Uni-Polar 6 Wire

    Bearing Description

    • NMB Precision Radial Deep Groove Ball Bearings (R-1650HH)
    • d: 5 mm (I.D.); D: 16 mm (O.D.); B: 5 mm (Width).
    • Shielding: ZZ - Double sided metal shielding.
    • The ZZ shielding protects the bearing against samll particles and dust while eliminating any drag usually associated with rubber sealed bearings.
    • High quality and industrial precision. Made from world class materials to ensure durability and a long life.
    • Excellent for motors, machines, tools

    Step Angle - 1.8 Degrees/step

    Voltage - 24 Volts 

    Current - 0.38 Amps/Phase

    Winding resistance - 22.4 Ohms/Phase

    Inductance - 21.5 mH/Phase

    Holding Torque - 2.0 kgf cm (28 ounce inch)

    Detent Torque - 150 gf cm (2.1 ounce inches)

    Rotor Inertia - 42 g cm2 (0.23 ounce inches)

    Weight -  260 g (0.57 Lbs.) 

    Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)

    Insulation resistance  500 VDC 100Mohm min.

    Dielectric Strength - 500 VAC 50 Hz 1 minute

    Operating Temperature Range 0 - 50C

    Allowable Temperature Rise 70 degrees

    Dimensions 1.65" X 1.65"  X  1.34" (42mm X 42mm X 34 mm Max) 

    Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.

    ApplicatIons: RobotIcs,  3D Printer,  Arduino,  CNC,  Router.

     

     

    Learn More
  9. SHINANO KENSHI - STH-39D249 - 1.8Deg 7.1-ohm 6-wire Mini-Stepper
    SHINANO KENSHI - STH-39D249 - 1.8Deg 7.1-ohm 6-wire Mini-Stepper
    Special Price $28.98 Regular Price $38.50
    READY TO SHIP - ONLY 2 LEFT IN STOCK!

    SHINANO KENSHI - STH-39D249 - 6 Wire Stepper Motor.

    Status: Discontinued

    Dimensions: 39mm Square x 37mmD.

    NEMA Size 14

    4.7mm Flatted Shaft 24mmL.

    1.8 Degree per Step

    7.1-Ohm Coils

    6-long Wires.

    New

    Made in Japan

    Learn More
  10. SUPERIOR ELECTRIC CO. - SS25-1138 - Motor, stepper. Slo-Syn 120VAC 0.1Amp.
    SUPERIOR ELECTRIC CO. - SS25-1138 - Motor, stepper. Slo-Syn 120VAC 0.1Amp.
    $19.00
    Motor, stepper. Slo-Syn 120VAC 0.1Amp 1000RPM 2.0 OZ In. Dimensions: 2.224" square base with 2.5" mount centers. Used/Removed from equipment. Learn More
  11. HURST - SP2953 Model AS – Pear Shaped Geared Motor, Stepper. 12VDC 3 Watt.
    HURST - SP2953 Model AS – Pear Shaped Geared Motor, Stepper. 12VDC 3 Watt.
    Special Price $18.98 Regular Price $28.95
    READY TO SHIP - ONLY 7 LEFT IN STOCK!
    Hurst - SP 2953 – Pear Shaped Geared Stepper Motor. Voltage: 12VDC Power: 3 Watt. Insulation Class A 105C Operating Temperature: -10C to 40 C Ambient Gear Housing: Die Cast with Hardened Gears Gear Reduction of 20:1 w/Sleeved Bearing Dimensions: Body 2.812” X 2.187” X 1.625” Shaft Diameter: 0.1874” Diameter Note: Used / Removed from Equipment Made in USA Learn More
  12. Eastern Air Devices - LA23ECH-28 - Stepper motor. 1.8 Deg/Step. New
    Eastern Air Devices - LA23ECH-28 - Stepper motor. 1.8 Deg/Step. New
    Special Price $24.98 Regular Price $36.95
    Eastern Air Devices - LA23ECH-28 - Stepper motor. 1.8 Deg/Step. New Stepper Motor. 2 Phase 1.4VDC 1.9Amp 1.8 Deg/Step. With pulley on 1/4" shaft 20mm long (57.3mm D x 52.2mm tall with pulley overall is 71.6mm tall). Oval mount 66.5mm centers. Motor has 4-Conductor 12" wire leads. Eastern Air Devices. Weight: 1.2-pounds. New Old Stock Learn More
  13. Eastern Air Devices - LA23ECH-27 - Motor, Stepper. 1.4VDC 1.9A 1.8 Deg/Step.
    Eastern Air Devices - LA23ECH-27 - Motor, Stepper. 1.4VDC 1.9A 1.8 Deg/Step.
    Special Price $19.98 Regular Price $38.50

    Eastern Air Devices - LA23ECH-27 - Motor, Stepper.

    2 Phase

    1.4VDC 1.9Amp

    1.8 Deg/Step.

    Torque: 35 in-oz (2.45 kg*cm)

    Steps/Revolution: 200

    4 Wire, 11" Leads.

    Oval Mount: 66.5mm centers.

    Dimensions: 57.5mm D x 52.4mm deep, plus 6.3mm flatted shaft 11mm long.

    Alternate P/N: 400-0072.

    Genuine Eastern Air Devices - New Old Stock

    Proudly Made in USA

    Learn More
  14. SEIBERCO Inc - 2311-021 - Motor. Stepper. 8 wires.
    SEIBERCO Inc - 2311-021 - Motor. Stepper. 8 wires.
    $25.00
    Motor. Stepper. 8 wires. Mounting: 4 holes 0.2"D x 1.85 spacing. Body: 2.25" sq x 2"L. Shaft: 3/8"D x 3/4"L. Weight: 1.6 lbs. 6' cable. Learn More
  15. AIRPAX - B82403-M7 - Motor, stepper. 12VDC.
    AIRPAX - B82403-M7 - Motor, stepper. 12VDC.
    $29.95
    Motor, Stepper. Gear Ratio: 15:1. Supply: 12VDC. Steps: 7.5 Degree. Wire count: 8-Wire. Body Dimensions: 2.131"OD. Learn More
  16. Philips - ECG1736 - IC. 4 Phase stepper motor driver. New.
    Philips - ECG1736 - IC. 4 Phase stepper motor driver. New.
    $15.00
    IC. 4 Phase stepper motor driver. Power amplifier module. Case: 18 Power SIP. New. Learn More
View as List Grid

18 Items

per page
Set Descending Direction
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.