Motors

Motor, Stepper, Dual-shaft. Supply: 3.0VDC 2.7A. Steps: 200 steps per rev. Direction: Reversible. Wire count: Internal-connections 4-terminal. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.36" [85mm] square x 6.2" [158mm] with both shafts, One 0.50"D double flat and one 0.375"D keyed. Connect per 213803. Two-phase, single stack. Weight: 5 lbs. Warner Electric / Superior Learn More

SIEMENS - 3RV1031-4HA10 - Siemens Sirius Motor Starters / Protectors - with Rotary Operating Knob

SIEMENS 3RV1031-4HA10 Manual Motor Starter, 50 Rated Amps, 40.0-50.0 Amps Range

Only 55mm wide.

50Amp 200-208V 15HP - 230V20HP - 460V40HP - 575V50HP

Manual Combination Starter type E

Number of Poles: 3

Termination: Screw

Voltage Rating: 690 V

Molded Case Breaker

Dimensions: Depth 149 mm, Length 144 mm, Width 55 mm

RoHS Compliant

Self-protected, Short circuit rating 50kA 240/408Y/277 and 25kA 600Y/374V

Excellent Condition / Removed From Equipment.

Learn More

Honeywell/Microswitch - 33VM82-020-11 - 24VDC Control Motor with Tachometer.

5.7Oz-In/Amp Torque Constant.

Rotor Inertia: 60 Oz-In-Sec*Sec 6.6Amps RMS.

Terminal Resistance 85-Ohms.

4"OD x 6.4" Long Including DC Analog Tachometr

Voltage Constant: 2.5V/KRPM.

Terminal Resistance: 50-Ohms.

Voltage Ripple: 1.5% P-P

0.5" Diameter Shaft with 1.6" Diameter rubber wheel.

Proudly Made in USA

Learn More

Encoder, rotary. Incremental 100-PPR. Bidirectional. Power requirements: current sink, TTL, TTL liner driver: 5 - 26VDC at 80mA max. plus load: CMOS line driver: 5 to 15VDC at 80mA max plus load. Output current: open collector: 40mA sink at 0.5V; line driver: 40mA source/sink. Environmentally sealed enclosure. Shaft: 3/8" single ended. 8830 TTL line driver. MS3102E-16S-1P, 7 pin male connector. Note: Qube. Complete with manufactures wiring instructions and guidelines.

Learn More

Bodine Electric - 24A4BEPM - Permanent Magnet DC Motor, 1/17 HP, 2500 RPM, 90/130 VDC

The Bodine Electric 24A Series Permanent Magnet DC Motors have consistent performance, long life, and reliability. Since 1905 Bodine motors, gearmotors, and controls have been used in assembly equipment, conveyers, packaging equipment, copiers, lab instruments, photographic processors, medical and other scientific apparatus; wherever component size, weight, reliability and integrity are prime considerations.

Model Number: 0049 Totally Enclosed PM Motor

Category: 24A Series Permanent Magnet: DC Motor

Speed: 2500 RPM

Rated Voltage: 90/130 VDC

Amps: 0.69/2.50

Motor HP: 1/17

Length XH: 4.68 inch

Weight: 3.4 lbs.

Product Type: 24A4BEPM

Connection Diagram: 074 10101 

Made in USA

Learn More

YASKAWA AC DRIVE 315/V7 0.2kWUSED - Input 3-Phase 380-460 VAC, Output: 3-Phase 0-460V 0-400Hz 1.2 Ampfront panel control, 4-digit display weighs 1.2kg Learn More

Optical Encoder Input-2000PPR Range:400,0006-1/8 " high x 5-1/4" dia. With one 32-Pin (M) panel mt military circular connector 3/8" dia shaft 1-1/8" long (Keyed) RFE-USED Make Us An Offer!!!! Learn More

SLO-SYN Desk-top Programmer. Push button controls for Code data and Field data. 14 mini toggle switches for all other functions. DB25S in rear. Used but great condition, still in box. Learn More

Motor, Stepper, Dual-shaft. Supply: 3.0VDC 2.7A. Steps: 200 steps per rev. Direction: Reversable. Wire count: Long wire cable to Internal-connections 4-terminal. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.36" [85mm] square x 6.2" [158mm] with both shafts, One 0.50"D double flat and one 0.375"D keyed. Connect per 213803. Weight: 5 lbs. Two-phase, single stack. Learn More

Motor, stepper. Hybrid. 35VDC 5.4Amp 1.8 Deg/Step 88 watt 1500RPM. bipolar-Parallel. Sigmax [Flux Focusing increases torque}. Shaft: 9.6mm/0.38" D shaft x 30mm long, 4-lead parallel. Max torque at low speed 500-PPR w/ line driver. Holding Torque: 223-349-oz-in [1.58~1.90nM]. Nema-34, 3.4" square frame. Two MS connectors; 5 Pijn male and an 8 Pin male. Made in the USA. Learn More

PMI KOLLMORGEN - 00-00917-050 - ServoDisc DC Motor with High Precision Analog Pachometer.

What separates the ServoDisc motor from conventional DC servos is its ironless disc armature. This difference enables ServoDisc motors to deliver a level of performance, in both incremental motion and continuous speed applications, which is not attainable with conventional ironcore motor designs. In addition to performance advantages, ServoDisc motors have a unique compact shape that can be an attractive alternative when solving tight packaging problems.

Type U9M4/U6T with PMI U6 Tachometer.

Horse Power: 3/4HP

Dimensions: 4.4" D x almost 6" long.

Has 1.5" dia attachment to large shaft.

2-wires to motor & two-wires to TachoMeter.

Note: Equivalent Platinum Model U9D-A & U9D-B

Proudly Made in USA

Learn More

135W AC Servo Torque 3.3kg-cm 2.27"D x 4.9"L plus 0.40"D splined shaft 0.6"L Mounts with two threaded holes 2.325" 60mm spacing. Has two 33" cables terminating in a 10-pin Male plug, with mating 10-pin panel mount receptacle, new - probably spares for a machine. weighs 2.8 pounds Learn More

FMU1 Speed Detector, FMP1 power supply and FMA Amplifier cards inside the basic FMH1 Proximity Control Module, sitting atop a FMH1 with FMBA / FE-21030 DELTROL CONTROLS 1/6HP-120V / 1/3HP 230VAC Module. No 24VDC Octal Plug-in Relay. Learn More

PM AC Servo Motor S1-1.9Kwatt 330V 9.1Amp 6000-RPM 4.5" square x 1.75"LSensor - Resolver Brake 12 Nm 24V 0.75Amp S/N 97/12225 Manuf in Ireland 0.75" keyed shaft 1.5" long 8-pin and 12-pin Male connectors. heavy duty.

Learn More

Optical Incremental Encoder. Series A. 5VDC 500 CPT. With attached Cannon 10 Pin male circular connector MS3102E18-1P. Complete with manufactures instruction manual. Made in the USA. Learn More

Encoder, optical incremental. 1024 Resolution. 24VDC in, 5VDC DLD out. Channel A, B and Z. Series A. Mount: square flange. Shaft: 3/8" D. With a CA3102R18-1P 10 Pin flange male connector and mate CA06R18-1S 10 Pos female cable mount. Note: ALT P/N 98301075. Complete with manufactures installation instructions. Made in the USA. Learn More

Optical Incremental Encoder. Diemsnsions: 64mm with a shaft 9.5mm. Has a 10 Pin MS3102E18-1P male connector. Mount: 3 hole, 42mm apart. Overall: 91mm tall including shaft. Learn More

Trane GE - D340316P13 - Programmable Variable Speed Furnace Blower Motor, GE ECM Module.

Power: 1/2 HP

Voltage: 115VAC, 60Hz

Current: 8.0 Amps

Rotation: CCW

Designed for Trane/American Standard Furnaces 

Genuine GE

Replaces MOT5432S

Approximate Dimensions: 5.50" Diameter X 3.10" Deep

New Old Stock

Learn More

Motor, stepper. Slo-Syn. Supply: 3.48VDC. N/P current: 3.25A. Winding res.: 1.07-ohms, 11.2mHy. Torque: 770-Oz-In [554Ncm]. Wire count: 4 wire leads. Weight: 7 lbs. Used. Learn More

Slo-Syn Inertial Flywheel. Dimensions: 3.99" D x 1.78" deep. For 0.35" shaft. Weight: 3.918 lbs. Learn More

Motors, stepper. SloSyn synchronous 3.47VDC, 2Amp, 200S/R. Hold: 325 oz in. Attached encoder 220022/219273, 500PPR with a DB9 female connector.Motor case: mount 3-1/4" square with 3-3/4" mt ctrs x 4-5/8" long body. Shaft: 0.380" D x 1-1/8" long. Connections: 4 conductor foil shieled cable plus ground wire. Learn More

Circuit breaker. 3P 30Amp 600VAC 250VDC. Series C. Instantaneous trip settings: 90-300Amps Cu/Al-UL Cu Only-CSA circuit breakers.

Learn More

Encoder. Marked: Resocoder. Mount: Panel, mount plate 2.654" square with 4 holes at 2.85" centers. Dimensions: body 2.5" D x 3.42" long, plus shaft, mount flange and connector. Shaft: 0.38" D x 0.846" long. Has one 10 Position male circular connector, part number MS3102E18-1P. Used/Removed from equipment. Overall length of unit is 5.75". Note: No other information available. Learn More

1HP 460/200-230V 2.4/4.8A 1Ph 60Hz Vertical Frame56 Permanent Split Capacitor, Condenser Fan motor. Reversible - 25uF 370VAC cap - 5/8" flatted & keyed Shaft 6"long, Auto-protected - Class B moisture resistant Insul, Double sealed ball bearing, positioning lugs for belly-band mountingNEMA-M56Y OAO SF:1.0 35-Pounds Learn More