Motors

Portescap -  ESCAP - 23-D-21-213-B2X2 Precision DC Brushless Micromotor & Tachometer. 

Miniature Precision Motor with exceptional torque and speed, higher efficiency and package sizes suited to meet your needs, brushless DC motors meet even the most stringent requirements. A brushless DC motor offers excellent speed and position control, long life, and high torque density.

Supply: 100mV -36VDC.

Speed: 100mV to 12000.

No load Current approximately 150 mA.

100mV = 30 RPM

6VDC = 2300 RPM

12VDC = 4500 RPM

24VDC = 9000 RPM

36VDC = 12,000 PRM

Speed Sensor: Two Pulses Per Revolution

Mech. Mtg: Two holes for the motor and six holes/pins for feedback information.

Body Dimensions: 23mm Diameter x 60mm (2.45" X  0.90")

Shaft - 3mm Diameter x 20mm Long (0.118" X 0.80").

Note: See Attachment for Pin Layout Connection.

Made in Switzerland

Factory New

Applications: Industrial, Hobby, RC.

Tridelta Industries, Inc. - M292-010A001-00B - Switched Reluctance Driver

Driver board for M132-013A001-16B SWITCHED RELUCTANCE motor - MOTORS SOLD OUT

Made by Tri-Delta, now a part of Honeywell.

Smaller Version Available P/N 705B0364 = Reference SKU: 149395

Tridelta Industries, INC. - 705B0364 REV A

SWITCHED RELUCTANCE motor DRIVER BOARD made by Tri-Delta, now a part of Honeywell.

Genuine Hansen Synchron - A12RC-6 Motor, AC. 

Synchron 600 Series, Shallow Pear Shaped Gearbox timing motors are the industry leader. The Hansen Synchron motor distinguishes itself with low noise levels and a robust, precision gear train. The motor is permanently lubricated and requires no maintenance during its lifetime. Gear material has been selected for the quiet operation and long life required in time measurement instrumentation and event recording applications.

Status: Discontinued

Permanently Lubricated requiring no maintenance.

Synchronous 110V 60Hz 3 watt 300RPM.

Starting torque: 20 in-oz

Teardrop shaped with D-Shaped Shaft and 2 Tab mounting

Dimensions: 1.970 Diameter long x 1.875" wide x 1.375" max high.

Shaft: 0.128" (3.175mm) D x 9.1mm long.

Looking at the shaft it turns Clockwise

New Old Stock

Made in the USA.

Electroswitch OAK-GRIGSBY INC. - 94Q100-40-00 - Rotary Encoder.

The 900 Series offers a full line of low cost, rugged optical encoders with incremental output. Well suited for industrial motion and position sensing, their low profile and high resolution also make them ideal for panel mounted applications. A two-channel quadrature code allows the encoder to detect the direction and magnitude of the input motion applied to its shaft.

Optical. 100PPR, 3,000RPM max.

Two Channel Quadrature Output.

Style 2 Output: NC + A B.

Mount: Panel, 1/2" bushing and 1/4" SS shaft, ball bearing type, spins freely.

Package: Die Cast Housing, 1" Square.

Standard 4" 4-pin Ribbon Cable and Connector.

Note: Compact, Robust, Economical. 100 million+ operations.

Minimotor SA Motors, DC. Precision cassette drive assembly. Used.

Older with four Swiss & German made motors; 

German 330/5055-150 22mm OD x 46mm.

German 330/507-150 22mm OD x 46mm including 2mm dia shaft.

German 330-509 22mm OD x 43mm.

And a 16mm geared Swiss Model 050/0055-095-485.1 200cmp MiniMotor SA 42mm Long with the 2mm shaft.

All permanent magnet and reversible.

You dis-assemble.

Eastern Air Devices - H34BBM-8.

Supply: 115V. N/P

Current: 1.45A 60Hz.

Speed: 1800 RPM.

Torque: 28-Oz-In.

Thermally Protector

Continuous Duty  

Direction: Hysteresis synchronous reversible.

HP: 1/25.

Wire count: 3 14-Inch teflon leads.

Mech. Mtg.: 4 10/24 threaded holes 2.625"spacing.

Body Dimensions: 3.36"D x 5.1"L.

Start/Run Capacitor 4uF required, not included.

Weight: 5 lbs  6 Ounce unpacked.

Note: 4uF 660VAC capacitor required for start and run between Black and Blue wires.

Alternate: Ashland Electric A66QBU-4, NSN 6105-01-082-2923

UL Approved

Factory New

Note: Detailed Specification Sheet is Attached.

Buehler - MPI 77671273 - 13-65-36 Precision High Speed Motor, DC.

Bühler /Bühler Motor is one of the pioneering ma­nufacturers of small brushed DC motors and electronically-commutated (EC), brushless motors. Bueler Motto - Fast Forward in all areas.

High speed Permanent Magnet motors 6-24VDC, with Tachometer Output.

Heavy Duty Precision Manufactured for low noise and vibration.

Dynamic Parameters attached - Runs Extremely well on 12 VDC 

Reliable Precision Ball Bearing Design

Removable plastic boot for Enhanced I\insulation.

Disc drive replacement 10,000 RPM MAX. 2-IN-OZ.

Dimensions: 1.38" D x 2.7" Long, with 10 mm pulley on shaft.

Bi-Directional - Runs in Either Direction.

Also useful as generator/wind speed indicator anemometer and science fair projects. 

As a Generator the voltage increases with speed.

Sinusoidal Encoder output 11.0 VAC - 850 Hz @ 12 VDC input

4 Pin Female Plug 

Face Mount, Two 6-32 Threaded Holes 1.0" Apart 

Shaft Diameter: 0.10", Pulley Dimensions .25" X .39" (10 MM) 

Size 56x33MM,

Quality Motor/Generator also used on Tandon Disk Drives.

Potential applications include process automation, robotics, small CNC systems or general electronic motion projects, disc drive motor replacement.

Weight: Approximately 5.5 Ounces/160 Grams.

New Old Stock

Made in USA

TRW/GLOBE - CMC144A152 Motor, AC. 1PH 38-46VAC 60Hz, 3600RPM.

Hysteresis Synchronous with Capacitor, 12uF included.

3 wire leads, teflon, 14" long.

Dimensions: 30mm D x 74mm long, including shaft.

With 7.5mm D gear.

Mounts on 2 threaded holes 21.7mm centers.

Note: Western Electric P/N: P-21F345.

Made in the USA.

New Old Stock.

HAYDON - 36890-60 - 120VAC 60RPM MOTOR for Chart Recorders

1/8"-Shaft 2" X 1.25" X 1.75" GOULD / BRUSH PLASTIC GEARS IN METAL HOUSING

Hurst - SP137 - Motor, Synchronous Gear Timing, High Torque

Hurst’s core business focused on instrument grade timing motors and assemblies, stepper motors and controls. Today the business has grown into manufacturing low-cost, high-performance brushless DC motors for many markets, including medical, printing and computer applications. 

Supply: 115VAC 60Hz.

N/P Current: 5W.

Speed: 1/15 RPM.

Torque: Hurst MSM Series.

Direction: CCW. (As viewed looking at the shaft)

Shaft Diameter: 0.185" (4.8mm) , Length 1.0: (26.6mm)

Wire count: 2 Wire Leads.

Mech. Mtg: 3 Holes 2.35" Spacing.

Body Dimensions: 2.4" (60mm) Diameter x 2" (51mm) Length.

HP: 0.188"D.

Applications: Displays

Made in USA - New Old Stock

HAYDON - AP35-500C - Motor, AC Timing

A Synchronous electric motor is an AC electric motor in which, at steady state, the rotation of the shaft is synchronized with the frequency of the supply current; the rotation period is exactly equal to an integral number of AC cycles.

Product description: 120 VAC Cam Synchronous Motor Drive. Latching microswitch with a rating of 22 Amp 125-250VAC. Adjuststable Cam Time from 1 Second to 14 Seconds. Synchronous Motor is a Hayden 120 VAC 4 RPM with 2-way clutch unit. Unit also contains a 120 VAC DPDT Relay 5 Amp Contacts. 

1 - 13.8 seconds.

Supply Voltage: 120VAC 60Hz 5W.

Haydon Synchronous Motor Speed: 4RPM, 5W E15450 A2396A4.

Mechanical Mount: Panel Mount Frame on 2.8" Centers.

Unit is Complete with Relay, Motor, and SPDT 15Amp Microswitch

Connections: Octal 8 Pin Socket.

UL CSA Approved

Proudly Made in USA

New Old Stock

UNIVERSAL ELECTRIC CO. - AF1G022K# Motor, AC. 3.3" Diameter

Universal Electric motors is a leader in supplying a full line of quality motors and blowers as well as automation control products for residential, commercial and industrial applications. They offer a wide range of standard catalog products and hard to find HVAC/R 'OEM' replacement motors and blowers. 

Permanent Split Capacitor Motor

230VAC 0.67Amp 60 Hz, 3000 RPM.

Horsepower: 1/12 HP

Mount: 2 Studs on 2.85" centers.

Start Capacitor 3uF (3MFD) Included & attached to motor.

No Oiling required, Thermal Protection.

Protection: Automatic

Enclosure: Open Air Over

Features:  Connection Box, Thru Bolts

Dimensions: 3.3" Diameter plus control box and capacitor x 4-5/8" long plus shaft.

Overall 4-3/4" wide.

Shaft: 3/8" D x 1-5/16" long.

New Old Stock

Applications: Industrial, HVAC/R, Evaporators, Blowers & Ventilation.

SIEMENS - 3RP1511-1AP30 - ON-DELAY RELAY

0.5-10Sec 24V/240V.

Only 0.89" wide 1-NO 1-NC -

Guaranteed Functional

Usede / Removed from Equipment

SHINANO KENSHI - STH-39D249 - 6 Wire Stepper Motor.

Status: Discontinued

Dimensions: 39mm Square x 37mmD.

NEMA Size 14

4.7mm Flatted Shaft 24mmL.

1.8 Degree per Step

7.1-Ohm Coils

6-long Wires.

New

Made in Japan