DC to DC Converter

DC/DC Converter. 5V to +/- 18V 100mA. Mount: PCB. Dimensions: 2" square x 3/8" high. Note: Bipolar output. Learn More

CALEX - 5D15.150 - DC/DC Converter.

The versatile 5 Watt Dual Output converter is particularly suitable for use in microprocessor systems where 5 Volts is the primary power source, and where a low noise plus and minus output voltage is required.

Status: Discontinued April 2020

Features
• Low Input/Output Noise Operation
• Low Profile Case (0.40”)
• Isolation Capacitance of 50pF
• Extended Operating Temperature Range of -40ºC to +100ºC.
• Fixed Frequency Operation

Input: 5V.

Dual Output: +/-15V 150mA 4.5 watt.

Mount: 5 Pin Module PCB.

Dimensions: 2" Square x 3/8" High.

Proudly Made in the USA.

Learn More

Power Supply, DC/DC Triple Output. Output: 15VDC@100mA, neg 15VDC@25mA, 5VDC@500mA . Input Voltage Range: 12VDC. Operating Mode: Switching. Overall Power Rating: 4 VA. Packaging Style: potted PCB assembly. Size: 2.5 x 2 x 0.4 inches. Output/output connections: PCB pins. Learn More

ERICSSON - PKG4410P - DC/DC  Convertor

The PKG units can be used as on-board distributed power modules, or serve as building blocks for more centralized power boards. The high efficiency makes it possible to operate over a wide temperature range without any extra heatsinks. At forced convection cooling >200 lfm (1 m/s), the PKG units can deliver full power without heatsinks up to +65°C ambient. With derated output power it can also operate in temperature controlled environments with non-forced convection cooling. By adding external heatsinking, the temperature range can be extended even further. Thanks to its peak power capability, the PKG series is ideal for applications where max power is only required during short durations e.g. in disc drives. The PKG series uses ceramic substrates with plated copper in order to achieve good thermal management, low voltage drops, and a high efficiency.

Input Voltage: 38-72VDC

Output Voltage: 3.3VDC @ 13.6Amps

45W Output.

Efficiency typ 86% (5 V) at full load

1500 V dc isolation voltage

Terminal Type: PCB

MTBF >200 years at +75 °C casetemperature

Rugged mechanical design andefficient thermal management, max+100 °C case temperature

EMI measured according toEN 55 022 and FCC part 15J

Dimensions: Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.

Made in Sweden

Learn More

DC/DC Converter. Input: 12VDC (10.8VDC - 13.2VDC). Input current: 20mA no load, 100mA full load. Regulated, without input filter. Output: 5VDC 100mA. Case: 12 Dip in a 24 Dip outline. Case material: non-conductive black plastic. New. Learn More

5VDC In - 5VDC Out 5W 2" x 1" x 0.4" plus 4-pins UL-approved NEWManuf in Mexico Learn More

DC/DC 5V TO -9V 200MA REGULATED Learn More

DC/DC Converter. Output: 20VDC 5 watt 250mA. Input: 9-18VDC. Package dimensions: 1" x 2" x 0.4" high. Isolated. Shielded, on all six sides. Short circuit protection. Minimum output currrent 10%. Power One. Learn More

DC/DC 5V-IN +15V 100ma Learn More

Burr Brown - DCP011515DBP-U - DC/DC Converter.

Input: 15V.

Dual Output: 15V.

Unregulated.

Dissipation: 1 Watt.

Package: 7 pin in a SOP-14 gull-wing package.

Burrt Brown is now Texas Instruments

Learn More

DC-to-DC-Charge Pump Voltage Converter - DC-DC, Output +12V/80mA,-12V/80mA. Case: 24 Dip/Socket Pulls/Used. Learn More