Power Supply

LAMBDA - KWS15-12 - 12VDC @ 1.3AMP

Sealed Modular

PC Mount 120/250Vac-In MFG.

NEMIC/LAMBDA

Learn More

Martek Power - CDI - 3005/12T24 DC/DC Converter Module

The 3000LP series is a family of compact 25W to 30W, high performance DC/DC converters. These converters are specifically designed to provide the flexibility, power density, and reliability required to fulfill local power needs in
applications ranging from telecom switch systems to portable instrumentation.

Wattage: 30W

Converts 24VDC to 5VDC@3A 

Efficiency @ Full Load: 80%

Greater than 800,000 MTBF

Note: Now Martek Power formerly CDI Conversion Devices Inc.

New Old Stock

Proudly Made in USA

Learn More

DC-DC Converter. Input: 9 to 36V. Output: 3.3V at 4.5Amp. Dissipation: 15 Watt. Package: PCB 6 pin module. Learn More

ASTEC - AA05A-024L-150S - Power Supply.

Input: 9-36V.

Output: 15V 5 watt.

Isolated Output.

Shielded.

Mount: PCB.

Operating Temp: -25 C to 71 C

Dimensions: 2" x 1" x 0.4" High, 4 leads.

Listed: UL.

Note: Double marked QA13-030-18 and MAS4030-8.

Learn More

Open frame Switching Power supply. 9-pin terminal board, 1+2, 3&4, 7+8 jumped, no hookup instructions. Replaceable ceramic 3AG fuse. New, older stock. 6.5" x */5" x 1.75" black aluminum case/frame. Only 1.8 pounds. Learn More

DC/DC Converter. Lanpac. Package: 1.25" square module, 5 pin. New. Learn More

DC/DC Converter. Out: 30A 3.3VDC. In: 3.7A 36-75VDC. Mount: PCB. Package: 7 Pin module. Dimensions: 2.24" long x 2.28" wide x 0.50" high. Note: Used/Removed from equipment. Listed UL/CSA. Learn More

DC/DC Converter. 24VDC to 9VDC. Chrome housed / module. PCB. Dimensions: 1" x 2". Note: Used/Removed from equipment. Learn More

DC/DC 5V-In 28V@25MA Out -=- CONVERTER MODULE Learn More

Cosel - ZUS1R5-2415 - DC/DC Converter.

Output Voltage: 15V.

Current: 100ma.

Dissipation: 1.5 watt.

Dimensions: 27.5mm wide x 18mm deep x 7mm high.

Package: 4Pin PCB module.

Manufactures specification sheet is available.

Factory New

Learn More

Inventronics - EUC-150S070ST - LED Driver, 150W Constant Current Type

The EUC-150SxxxST Series operate from a 90 ~ 305 Vac input range. These units will provide up to a 5.95 A of output current and a maximum output voltage of 428 V for 150 W maximum output power. They are designed to be highly efficient and highly reliable. The standard features include lightning protection, over voltage protection, short circuit protection, and over temperature protection.

Input Voltage / PFC: 90 ~ 305 Vac / 0.99 (typical)

Output Voltage: 128 ~ 214 VDC, 1.05A 150 Watt Constant Current

Ultra High 92% Efficiency

Active Power Factor Correction (0.99 Typical)

Constant Current Output

Lightning Protection

Fully encapsulated with waterproof IP67 level compliant

Reliability Protections: OVP, OTP, SCP

Safety Regulation: Comply with UL8750 & EN61347

MTBF: 300,000 hrs @ 25ºC, full load, 110 Vac input

Lifetime: 80,000 Hrs @ 110 Vac Input, 80% load, 25ºC ambient Temp.

 

 

 

Learn More

Inventronics - EUC-150S070STA - LED Driver, 150W Constant Current Type

The EUC-150S070STA LED Driver is a 150W, constant-current LED driver that operates from 90-305 Vac input with excellent power factor. It is created for high bay, tunnel and roadway lights. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature.

Input: 100-240VAC/277VAC.

Output: 107 - 214 VDC Output.

High Efficiency (Up to 93%)
Constant Current Output
0-10V Dimming Control
Input Surge Protection: 4kV line-line, 6kV line-earth
All-Around Protection: OVP, SCP, OTP
Waterproof (IP67) and UL Dry / Damp / Wet Location
SELV Output
TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location
UL Type TL (Temperature Limited)

 

Learn More

Power Supply, OEM Linear open frame. Output Voltages: +12 VDC/0.1A; -12 VDC/0.1A; -10 VDC/2.5A; +80 VDC/0.25A (unregulated). Input Voltages: 115/230 VAC, 47-440 Hz. Dimensions: 9" x 4.875" x 3". Learn More

PVD1R5-5-1212 �12.0V 0.06Amp 1.44W 5.0VDC-InputSIP Style Footprint - Dual Output - Adjustable Output Voltages - In/Out IsolationBody: 1.084" x 0.661" tall. Learn More

Bipolar Output +/- 12V 0.42A each 18-36VDC-In 0.71A Small <1"x2"x0.38"high. UL VDE CSA Good Housekeeping Seal of Approval, maybe. Learn More

Power Supply. Triple out DC, switching. Input: 115/220VAC 47-63Hz. Output: +5V 6.5Amp, +12V 4.7Amp (6.5APK), -12 1.7Amp(4.0APK). Learn More

Power supply, linear. Output: +5VDC @ 2A and +/-12VDC @ 0.4Amp. Input: 100-240VAC. Dimension: 6.5" L x 4" W x 1.62" H (165.1mm x 101.6mm x 41.2mm). Mount: chassis/open frame. Learn More

Power supply. Output: 5VDC 3Amp. Input: 85-132VAC 47-440Hz or 110-165V 23 watt. Dimensions: 3-1/2" x 3-3/4" x 1-1/3" high. Note: Used. Learn More

15VDC 3.5A Light Switching P/S new, in box 100~240V 50/60Hz 0.9A Input Learn More

International Power Sources - IHN24-3.6 - POWER SUPPLY

Output Power: 86 W      

Input Voltage: 100 VAC, 120 VAC, 220 VAC, 230 VAC to 240 VAC

Number of Outputs: 1 Output   

Output Voltage-Channel 1: 24 VDC          

Output Current-Channel 1: 3.6 A              

Mounting Style:Chassis

Dimensions: Length: 177.8 mm, Width: 123.7 mm, Height: 81.28 mm      

Open Frame/Enclosed: Open Frame       

Industry: Industrial         

Input Frequency: 47 Hz to 63 Hz

Brand: International Power        

Load Regulation: Regulated        

Product Type: Linear Power Supplies      

Unit Weight: 6.614 lbs

Proudly Made in USA

Learn More

INTER'L POWER - IHB12-1.7 - Power supply, DC. Linear

12VDC 1.7Amp 20watt

Input Voltage: 100 VAC, 120 VAC, 220 VAC, 230 VAC to 240 VAC,

Number of Outputs: 1, Output Voltage (Channel 1): 12V, Output Current (Channel 1): 1.7 A

Chassis mount open frame.

More info: http://www.internationalpower.com/cases.html#b

Learn More

Hewlett Packard - 9100-5128 - Power supply, AC adapter. Input: 220VAC 50Hz 105mA 23VA. Output: 30VDC 400mA 12 watt. Deck top. Model: C2180A. Note: Double marked Lucent 3502F. Complete with huge 3 conductor male (round pins) input power cord (Mayor MP234BS546) and a 6 foot 2 conductor output cord and a female 6.5mm OD, 3.0mm ID barrel connector. Power supply module for HP printers. Manufactured in Mexico.

Learn More

Power supply, AC adapter. Input: 240VAC 50Hz 90mA 23VA. Output: 30VDC 400mA. Deck top. Model: C2181A. Note: Double marked Lucent 3502G. Complete with huge 2 conductor male (round pins) input power cord (Mayor M3203) and a 6 foot 2 conductor output cord and a female 6.5mm OD, 3.0mm ID barrel connector. Power supply module for HP printers. Manufactured in Mexico. Learn More

24V 200WATT IN 12VDC 150WATT OUT POWER SUPPLYPCB MTMade in the USA Learn More