Power Supply

POWER ONE (Bel Power Solutions) - DGP20E48T5/15 - Power Supply / IGBT Module.

Status: Discontinued

DC/DC Converter.

Input Voltage to 48V.

Triple Output: 5V 2.5A, 15V 250mA, and -15V 250mA.

Power: 20 Watt. Isolated.

Voltage-Isolation: 700V.

Input: 36V min, 72V max.

Operating Temperature: -55 to 100 Deg C.

Mount: PCB.

Package: 7 Pin Module.

Approvals: UL, CSA, RU, TUV

Dimensions: 2.02" L x 2.02" W x 0.45" H (51.3mm x 51.3mm x 11.4mm).

DC-DC converter (ex. Board Mount type, Off-board type) to work properly, it usually needs a minimum load for each output. The minimum load is to ensure that the DC-DC converter can operate within the manufacturer's specification.

Note: Genuine Power One - Made in Mexico

Learn More

15V 150W-max OUT - 48VDC-In(36-75V 188W-max) AMPSS POWER MODULE2.3" x 2.4" x 0.5" plus sixteen 0.25"-leads SENSING,V-ADJ, SHARE, ENABLE, CLK-IN - "For Evaluation - Subject to change" NEW - APM-trademark $155.35 LIST Learn More

ACDC Electronics - OEM15N11.2-1-2

High Current - High Quality 

15VDC 11AMPS Power Supply 

Dimensions: 12" length x6-3/4"Height x 4-3/4"Wide

Approximate Shipping weight: 25 lbs.

Proudly Made in USA

Used

Learn More

DC/DC Converter. Single output 9V 25 watt. Input: 24VDC. Module 7 pin, chrome housing. Dimensions: 2" x 2". Learn More

DC/DC Converter. Single output. Output: 1.8V 4Amp. 7.2 watt. Input: 36-75V. Case: 2.00" L x 1.06" W x 0.50" H (50.8mm x 26.9mm x 12.7mm). 20 Pin. Learn More

IN: 36-72VDC Output 12VDC +/-5% 0 - 1200mA 3Watts - (Adjustable with TRM terminal) DC/DC Converter - Output current limiting, automatic recovery - Only 20 x 28mm, 7.8mm above board. SHIELDED in five dimensions. Learn More

TDK LAMBDA - SM3024S05 - 5VDC 30Watt OUT - 24VDC Input

65mm square x 10mm. 20-pins each side.

Made in USA

Learn More

TDK LAMBDA - SM2024D12  - DC/DC MODULE fits in special socket. 46mm square x 10.2mm

Status: Discontinued

Case/Package    SMD/SMT

Mount: Surface Mount

Efficiency: 80 %

Isolation Voltage: 700 V

Max Input Voltage: 36 V

Operating Temperature: -40 °C to 60 °C

Max Output Current: 830 mA

Max Power Dissipation; 20 W

Min Input Voltage; 18 V

Number of Outputs: 2

Voltage - Output 1: 12 V

Voltage - Output 2: -12 V

Dimensions; Height 10.16 mm, Length 46.482 mm, Width 35.56 mm

MADE IN USA 

Learn More

DC/DC Converter. 15 Watt.Output: 15VDC 1Amp (1000mA). Input: 48V nominal 20 to 60VDC. Input current: 20mA no load, 380mA full load. Mount: Case "J", PCB, 7 Pin module. Dimensions: approximately 2" x 1.6". New. Learn More

Conversion Devices Inc  CDI - 212S24FR - DC/DC Converter.

Conversion Devices, Inc. designs and manufacturers medical grade linear and switching ac/dc and dc/dc power supplies to OEM's for use in medical and Industrial.

High Quality Overstock from a Medical Equipment Manufacturer

2.5Watt.

Input: 24V.

Output: 12V 165mA.

Mount: PCB Through Hole.

Package: 24 Dip.

New Old Stock - Rare

Learn More

DC/DC Converter. 3 Watt, unregulated. Input: 24VDC. Output: 12VDC 250mA. Mount: PCB 12 Pin. Learn More

1.5 WATT 24-pin DIP Unregulated +/-12V +/104mA Out - only 5V-input NEW DC/DC BEAUTIES, in tubes. Learn More

DC/DC Converter. Dual output. Output: 3.3V / 2.5V 4Amp. 13.2 watt / 10 watt. Input: (24V) 18-36V. Case: 2.00" L x 1.56" W x 0.50" H (50.8mm x 39.6mm x 12.7mm). 30 Pin. Learn More

2Vo (Adjustable with TRM terminal and external resistor) 10Amps OUT - 36-60VDC Input - many remote functions. Unenclosed. 60x98mm x 11mm high including thirteen terminals. Learn More

Conversion Devices Inc  CDI - 215S24FR - DC/DC Converter.

Conversion Devices, Inc. designs and manufacturers medical grade linear and switching ac/dc and dc/dc power supplies to OEM's for use in medical and Industrial.

High Quality Overstock from a Medical Equipment Manufacturer

2.5Watt.

Input: 24V.

Output: 15V 133mA.

Mount: PCB Through Hole.

Package: 24 Dip.

New Old Stock - Rare

 

Learn More

DC/DC Converter. Input: 150VDC 75 watt. Output: 24VDC 50 watt. Module: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm). Used/Removed from equipment. Learn More

DC/DC Converter. Input: 18-36VDC. Output: 5VDC +/-5% 0-600mA 3 watt. (Adjustable with TRM terminal). Output current limiting, automatic recovery. Dimensions: 20 x 28mm, 7.8mm above board. Shielded in five dimensions. More info: http://us.tdk-lambda.com/lp/ftp/Specs/pc.pdf Learn More

LAMBDA - LYS-X-20 - Power Supply.

Status: Discontinued

Output: 20VDC 6.7 Amp

Input: 105-132V 47-63Hz or 130-160VDC.

195W max.

40 Deg C,

5.9Amp 50 Deg C. MPS.

Regulation=0.1%, remote programming.

Open-frame with cover (derate 10%).

Dimensions: 7" x 4.9" x 3.7".

New in Manufactures Packaging.

Learn More

Power Supply 5V 12V 15V 24V with remote sensing, currents unknown. CSA-LR52931L1 BABT-NS/1273/123/J/600943 UL-E85954 12"x7.5"x2.75" Used. Learn More

Power supply. Input: 115/230VAC 47-440Hz. Output: 5VDC 12Amp. Mount: Panel. Learn More

Power supply. Output: 5V 2A/9-15V 500mA. Open frame. More info: http://www.power-one.com/sites/power-one.com/files/lin_99.pdf Learn More

about 8.1" x 5.1" x 2.15" with Voltage, OverVoltage and OverCurrent adj trimpots.Wired for 115VAC 2.4A input but will accept 230V if you truly so desire.#4 packed each..... Learn More

Power supply, DC. Output: 28V 3.8Amp. Input: 100-240VAC 1.4-0.7A 50/60Hz. 100 watt. Open frame. Rohs compliant. Used, excellent condition. Learn More

Power supply. 5V 2Amp. Input: 85-125VAC. 16Watt. Note: Compact. More info: http://www.coselasia.com/pdf/select_g.pdf Learn More