Encoder

BOURNS - ECWOJ-B24-CD0009 - Encoder, rotary. Incremental Status: Discontinued Encoder, rotary. Incremental encoder / quadrature output. Mounting Style: Panel Mount Product:Mechanical Encoders Type: Incremental Resolution: 9 PPR Technology: Rotary Number of Detents: 36 Detent Number of Channels: 2 Channel Termination Style: PC Pin Output Type: Quadrature Shaft Diameter: 1/4 in Shaft Type: Slotted With Switch: Without Switch Operating Supply Voltage: - Life: 200000 Cycle IP Rating: IP40 Brand: Bourns Bushing Material: Plastic Bushing Size: 9 mm x 6.35 mm Bushing Thread: M9 x 0.75 Maximum Operating Temperature: + 85 C Minimum Operating Temperature: - 40 C Product Type: Encoders Shaft Length: 3/4 in Size / Dimension: 28.5 mm x 22 mm Mount: PCB. Rohs compliant. Learn More

TRI-TRONICS - SDLRF1 - High Resolution High Speed SensorSMARTEYE®, High Gain, Red LED, NPN, F1 Fiberoptic Block.

SUPPLY VOLTAGE: 12 to 24 VDC, Polarity Protected

CURRENT REQUIREMENTS: 75 milliamps (exclusive of load)

OUTPUT TRANSISTORS: (1) NPN and (1) PNP sensor output transistors

Outputs sink or source up to 150 milliamps (current limit)

RESPONSE TIME: High Speed Models

500 microseconds, Very High Speed Models,100 microseconds

High Gain Models, 1.5 milliseconds, LED LIGHT SOURCE:

Options: Infrared= 880nm, Red= 660nm, Blue= 480nm, White= Broadband spectrum. Pulse Modulated

AMBIENT TEMPERATURE:

-40ºC to 70ºC (-40ºF to 158ºF)

RUGGED CONSTRUCTION:

Chemical resistant high impact polycarbonate housing

Waterproof, NEMA 4X, 6P, and IP67 enclosure rating

Conforms to heavy industry grade CE requirements

DIMENSIONS:

Width: 2.715 in (69.0mm), Height: 1.715 in (43.6mm), Depth: .64 in (16.3mm)

MAXIMUM SENSING RANGE:

Retroreflective: up to 20 ft.

Proximity: up to 3 ft.

Fiberoptic Proximity: up to 7 in.

w/o lens / 1 ft. w/lens

Fiberoptic Opposed Mode: up to 16i n.

w/o lens / 20+ft. w/lens

Proudly Made in USA

Learn More

Rotary shaft encoder. Includes report of acceptance tests, For S/N 74586. Dimensions: 27mm D x 67mm plus 8.8mm long 3.3mm shaft with 34 teflon leads 37" long. No other data available. S/N 74590. New. Learn More

Potentiometer. Resistance: 5K Ohm (1st) section, 20K Ohm (2nd) section. dissipation: 1 watt. Marked: Rotary actuator travel in angular degrees: 3116. (about 8.65 rotations) CUP-A. Cylindrical servo mount, 6 wire leads. Dimensions: 1.813" (46.0mm) D x 1.993" (50.6mm) high. Single shaft: slotted, 0.125" (3.1mm) D x 0.442" (11.2mm) long (plus 2.0mm seat). Note: Resistor, variable, Wirewound, Precision. Military NSN 5905-00-769-4626. Learn More

240 PPR - Unidirectional with analogue output linear proportional to speed of rotation. 1V / 100 laps - 1V / 1000-RPM - New mating Connector included - 11-25V 30mA 5,000-RPMmax Fmax=50kHz, for output with hysteresis, X4 signal is a sequence of rectangular pulses. Open Collector Output. Custody: Anodized aluminum face plate, plastic housing. Moment of inertia: 50gr cm - Angular accelerattion: 2000 rad/sec2. Learn More

ACCU-CODER INCREMENTAL SHAFT ENCODER60 PULSES PER REVOLUTIONModel 721 - AC Powered Unidirectional EncoderDesigned for use where DC power is unavailable. It is essentially a 711 with a built-in 120 VAC power supply. MATING CONNECTOR INCLUDED

Made in USA - New Old Stock

Learn More

OPTICAL ENCODER 390-Pulses per Revolution 12VDC 3/4"Hollow for 4K RPM Shaft 0-6000Hz 10-oz running torque 2.25"dia x 1.735" thick - NEW sealed ball bearings - 12V@25ma DC - Square wave out Sinks 20 mA - 1uSec rise time Aluminum with black anodized finish, 3-conductor cord 6' long wt:8oz Designed to mount directly on a motor shaft. As the shaft rotates a square wave output pulse is generated that varies at a rate proportional to shaft speed. Ideal for motor speed control or tachometer feedback applications. Just ideal! Learn More

Input: 5/28VDC Has brass coupler with 0.367" ID, short cable w/ 4-pin Male 14S Amphenol panel mount connector. 1.5"OD X 1.4" with coupler and mount. Learn More

Encoders, rotary. Optical. Dimensions: 2-5/16" dia x 1-1/3" high with a 1/4" shaft 9/16" long. Used/RFE/Removed from equipment. Learn More

Encoders, rotary. Optical. Used/RFE/Removed from equipment. Learn More

Rotary Optical Encoder. Incremental. Insta-Mount. Learn More

Encoders, rotary. Supply: 12VDC 150mA. Tolerance: 5%. 3600P/R 2 phase square wave + zero mark. Totem pole output, load resistance 470 Ohm min. Open collector output 40 VDC, 50mA or less. Timing can be selectable. More info: PG8 http://www.onosokki.co.jp/English/hp_e/whats_new/Catalog/PDF/RPseriesE.pdf

Learn More

Waters International Manufacturing Inc - APT55-11-B - Encoder, Rotary.

Encoder, Rotary.

Position Transducer.

Absolute Potentiometric Encoder.

Resistance: 10K Ohm.

Tolerance: 10%.

Shaft Angle 360 Deg.

Dimensions: 2.171" D x 1.786" high.

Made in the USA.

New Old Stock

Learn More

Shaft Angle Encoder 4.7mm round shaft ~ 27mm diameter, has long cable with MS connector. Learn More

Encoder, rotary. Incremental 600-PPR. Unidirectional. Power requirements: current sink: 5 - 26VDC at 100mA max. plus load: line driver: 5 to 15VDC at 200mA max plus load. Output current: open collector: 40mA sink at 0.5V; line driver: 40mA source/sink. Environmentally sealed enclosure. Shaft: 3/8" single ended. 7406 Open collector with 2.2k pull-up. MS3102E-14S-6P, 6 pin male connector. Note: Qube. Complete with manufactures wiring instructions and guidelines.

Learn More

Encoder, rotary. Incremental 1000-PPR. Input: TTL (+5VDC): 135mA max. CMOS (+12 or +15VDC): 100mA max. Rugged all metal housing. Mount: Servo face, 1/8" stainless steel shaft. 5V STD. Dimensions: 1.1" OD x 1.2" high. 4 Wire plus braid shield. Minature. Complete with manufactures wiring instructions and guidelines. Learn More

DYNAPAR / DANAHER - E1103601200 - Encoder, Rotary.

The Series E12 is a ultra-miniature incremental optical encoder packaged for commercial and lighter-duty industrial applications. Its small size is ideal for confined spaces with a resolution from 100 - 1024 PPR with an optional index.

Rugged Metal Housing - Sub-Compact 1.2” Diameter - Up to 1024 PPR with Optional Index

Incremental 360-PPR.

Input: TTL (+5VDC): 135mA max.

CMOS (+12 or +15VDC): 100mA max.

Rugged all Metal Housing.

Mount: Servo Face, 1/8" Stainless Steel Shaft. 5V STD.

Dimensions: 1.2" OD x 1.2" Body Length.

4 Wire plus Braid Shield.

Miniature Size 12.

Factory New Complete with Manufactures Wiring Instructions and Guidelines.

Learn More

DYNAPAR / DANAHER - 3200100000 - Encoder, Rotary.

Dual shaft 7406 OC.

MFG CD: 867413. DAT CD: 0136.

Each shaft: 3/8" D.

Dimensions: 2.25" blue cube with 6-pin male MS connector.

New Old Stock

Learn More

Encoder, rotary. Bidirectional. 10 Pulse/Rev, 5-26V. Mount: 4 holes = 6/32 UNC-2B threads x 0.187 deep, with 50mm centers. Dimensions: approximately 57mm square x 57mm high. Shaft: 3/8" single ended. 5 Pin male MS connector. Complete with manufactures wiring instructions and guidelines. Qube. Learn More

Rotary Optical Encoder. Incremental. Insta-Mount. Enclosed, complete with attached 5 conductor shielded cable, single ended. Dimensions: 2.125" D round x 1.045" high with 2 hole mount 1.812" centers. More info: http://www.beiied.com/PDFs2/MX21.pdf Learn More

Encoder, Rotary. 3600-Pulse/Rev 12VDC. 122mmD x 140mmL with 0.6"[15mm] flatted shaft 1''Long. 5-Inch [127mm] Flange mount. Learn More

Rotary shaft encoder. Learn More

Sealed linear encoder. 240mm. Measuring standard - DIADUR phase grating on steel. Output signal - 1 Vpp. Signal period - 4 �m. Accuracy grades - � 3�m. Single-field scanning 1 VPP; 20 um. Recommended measuring steps - to 0.1 �m. Thermal behavior similar to steel or cast iron. High vibration rating. For incremental linear measurement with very high repeatability. Measuring length - 240mm. Reference mark - One or distance-coded High positioning accuracy through single-field scanning. Horizontal mounting possible. Learn More

Encoder. Marked: Resocoder. Mount: Panel, mount plate 2.654" square with 4 holes at 2.85" centers. Dimensions: body 2.5" D x 3.42" long, plus shaft, mount flange and connector. Shaft: 0.38" D x 0.846" long. Has one 10 Position male circular connector, part number MS3102E18-1P. Used/Removed from equipment. Overall length of unit is 5.75". Note: No other information available. Learn More