Hydraulic & Pneumatic
-
- Numatics - 215-172A - 215-172A-12-84 - Pneumatic pressure regulator.Special Price $48.98 Regular Price $75.00Out of stock
Numatics - 215-172A - 215-172A-12-84 - Pneumatic Pressure Regulator.
Numatics Pressure Regulators are designed to control the pressure in compressed air lines. They provide consistent pressures; they remove fluctuations in the air supply and are adjustable.
Sandwich Dual Air Regulator
Mounts between the valve and subbase.
New Old Stock
- Worcester Controls - 10 39 - Flowserve.$165.00Flowserve. Series 39. Pneumatic actuator. Model 10 39 SN R6. Output torque 80PSI. 95 in lbs. Max operating pressure 120PSI. More info: http://www.flowserve.com/files/Files/Literature/ProductLiterature/FlowControl/WorcesterControls/WCABR1003-02.pdf Used/Good condition. Learn More
- SMC PNEUMATIC INC - ZL112-E65L - Vacuum Ejector - AS IS$149.00Multistage Ejector Pressure Switch - Looks nice 'cept for the broken LCD display. Supply: 0.15~0.7MPa Vacuum: 0~84kPa - 'fraid it has to be sold AS IS Learn More
- SMC PNEUMATIC INC - VVQ4000-85A - new Valve manifold block ADAPTER PLATE$30.00NEW with bag o' gaskets & 3 screws. http://www.airlinehyd.com/APOLLO/SMC/VQ4000.PDF Learn More
- Schroeder Industries - FZX3 - Microglass Hydraulic FilterSpecial Price $48.98 Regular Price $85.95
Schroeder Industries - FZX3 - Excellement 2000-Series Beta-x
-/>200 Synthetic Microglass Filtration Media
3-Micron
Pleated Microglass Media
3-inch Nominal Length
High Collapse Pressure: 3045 PSI.
ISO 9001:2015 Certified.
Proudly Made in USA.
Learn More - DESTACO - 82M-7L63C80-NA - Parker P82M63-3200 Pneumatic Power Clamp Actuator Dual Shaft.
DESTACO - 82M-7L63C80-NA - Parker P82M63-3200 - Pneumatic Power Clamp Actuator Dual Shaft with Turck BDS-2AP6X3-H1141/S34 ProXimity Sensor, 2mm Sensing Distance,
Pneumatic power clamps provide automotive and sheet metal processing customers with superior holding power in a versatile, user-friendly and low-maintenance package.
Heavy Duty Industrial Clamp
Equivalent Diameter: 63 mm
Stroke: 90 mm
Operation Range: -10C to 80 C
Max Inlet Pressure: 8 bar
With Optional Inductive Proximity Sensors and LED Indication Turck Ni-K09-o,095/0,11 - BDS-2AP6X3-H1141/S34
10-30 VDC 150 mA
Approximate dimensiuons: 16" X 6" X 6", 11 Pounds
Made in Brazil / Proudly Assembled in USA
Lightly Used , Removed from Equipment and in Excellent Condition.
Learn More - Bimba - D850 - Rod Clevis Kit 9/16" bore. Accessories.$5.00Cylinder hardware, Rod Clevis Kit 9/16" bore. Accessories. Learn More
- Bimba - CFO-01245-ATJ -Cylinder. Flat-1.$69.00Out of stock
Bimba - CFO-01245-ATJ - Cylinder. Flat-1.
Shaft: 0.5" D.
Mount: flush.
Dimensions: overall approximately 8" long x 2.4" wide x 3.2" high.
Mount is 6-1/2" long x 2-1/3" wide with four mount holes at 6" centers.
New.
Learn More - BARBER COLEMAN - TKS-8014-0-1 - Pneumatic Immersion Transmitter$75.00Out of stockPneumatic ImmersionTransmitter / range : 0 - 100 F ( rod and tube 9 1/4" long ) Learn More
- AMETEK USG - SPEC. No. 45764 - Pressure Gauge 2 Inch Diameter, 0-60PSI. 1/4" Inlet, P500 Series
AMETEK USG - SPEC. No. 45764 - Meters & Gauges, P500 Series.
AMETEK U.S. Gauge is one of the world's leading suppliers of high quality, competitively priced pressure gauges. The Model P500 is a general purpose commercial gauge measuring vacuum pressure, gauge pressure, or compound gauge pressure. These bourdon tube pressure gauges have phosphor bronze or beryllium copper tubes, with brass sockets. The case is black painted steel for durability.
Pressure GaugeSize: 2 Inch. Diameter
Type: Bottom Stem
Scale 0-60PSI.
Inlet Fitting: 1/4"LM
Alternate: 16326
Proudly Made in USA
Learn More - Millennium-Filters MN-HP59NL1925MV HY-PRO Hydraulic Filter, Direct Interchange, 19.5" LengthSpecial Price $168.98 Regular Price $240.00
Millennium-Filters MN-HP59NL1925MV HY-PRO Hydraulic Filter, Direct Interchange.
Millennium-Filters hydraulic cartridges are built to provide superior protection from particles and contamination that can result in inefficiency, downtime. Proper fluid cleanliness levels are critical for components in the hydraulic fluid stream. Types of filtration media used depend on the application. Millennium Filters use microglass media, stainless steel mesh, or paper media. Micron ratings range from 250 microns down to 1 micron. These hydraulic cartridges are essential in reducing operating expenses.
Body Material: Pleated Microglass Media
Brand Name: Millennium-Filters
Item Shape: Round
Length: 19.5 inches
Temperature Rating: -13 degrees fahrenheit to 250 degrees fahrenheit
Material: Pleated Microglass Media
Maximum Pressure: 435 pounds_per_square_inch
Maximum Working Pressure: 435 pounds_per_square_inch
Measurement System: Inch
Model Number: MN-HP59NL1925MV
Part Number: MN-HP59NL1925MV
Particle Retention Size: 20 µm
Seal Material Type: Viton
UNSPSC Code: 40161500
Width: 3 inches
Package Dimensions : 20.4 x 4.3 x 4.2 inches; 4.55 Pounds
Alternate: WIX D56B20EV Direct Interchange
Applications: Hydraulic Fluids, Construction Equipment, Hydraulic System Filter Housings, Hydraulic Circuits, Fluid Contaminants, Hydraulic Maintenance, Hydraulic Components, Hydraulic Fluid Contamination Control, Donaldson Hydraulics, Parker Hydraulics, Pall Hydraulics, Hydac, Schroeder, Eaton Vickers, Mahle, Fleetguard Cummins, Purolator Facet.
Learn More - WELKER BEARING Co - WPA-40-73 - Welker gold-line shot pin 75mm stroke.$50.00Out of stockWelker gold-line shot pin 75mm stroke. "The mounting surface for the shotpin must be flat within 0.05mm (0.002") 80.6mm[3.176] square x 21"long - Cylinder: WCP-002 Bore: 63mm Stroke: 75mm. Weight: 21 lbs. General Info: (Rap or Rigid coupler) - Double rod, Extend stop or Retract stop available. Learn More
- SMC - CQ2B32-100DM - Cylinder, air. Stroke 4", 145PSI-max.$59.99Cylinder, air. Stroke 4", 145PSI-max. Dimensions: 1.78 x 1.95 x 6.4" long including 0.54"D threaded shaft. Weight: 2 lbs. More info: http://www.coastpneumatics.com/metric/cylinders/cq2_series_cylinders.pdf Learn More
- ROSS CONTROL - 2751A4902 - Pneumatic valve. Series 27, type B.$95.00Out of stockPneumatic valve. Series 27, type B. Port size 1/2 NPT 2W NC L MV strong spring. Weight: 3 lbs. Learn More
- REMOTE CONTROL INC - RCI240-DA - Actuator, 150 PSI 10 BAR 1.0MPA.$200.00Actuator, 150 PSI 10 BAR 1.0MPA. Weight: 10 lbs More info: http://www.rciactuators.com/documents/7256_RCI200_DIMENSIONAL_DATA.PDF Learn More
- PARKER - Hydraulic Div - 01.50 CJ2HLTV14AC 5.000 - Hydraulic. Series 2H Cylinder Division.NewSpecial Price $189.98 Regular Price $249.95PARKER - Hydraulic Div - 01.50 CJ2HLTV14AC 5.000 - Hydraulic. Exclusive with the Parker Stepped Cushion for increased performance and productivity ■ Faster cycle time ■ Reduced hydraulic shock ■ Reduced machine noise ■ Lower machine maintenance. . Patented “Jewel” rod gland for longer life and lower operating costs. Chromeplated, case hardened piston rods. Rod end studs of high yield-strength steel, with rolled threads for added strength. Tie rods with rolled threads and steel nuts. Floating cushions with float-check action and positive metal-to-metal seal. Hydraulic. Series 2H Cylinder Division. Tie Rod Cylinder Bore: 1.50” Stroke: 5.00” Envelope Pressure: 3000-PSI Hydraulic. Life: — Over Millions of trouble-free cycles Factory New - Made in Canada https://www.parker.com/literature/Industrial%20Cylinder/cylinder/cat/english/0106b003.pdf Learn More
- PARKER HANNIFIN - Hydraulic Filter Division - 932340Q 10QYM - Filtration Element 3"OD x 8"L.Special Price $38.98 Regular Price $65.00
PARKER HANNIFIN - Hydraulic Filter Division - 932340Q 10QYM
Hydraulic Filtration Element 3.10" OD x 8.10" Length.
inner Diameter: 1.690"
Filter Type: Pleated Synthetic Elements
Filtration Selectivity Raring: 12 MICRON ABSOLUTE (B12=200)
Maximum Flow: 60 GPM
Operating Temperature Range: -45 TO 225 F
Initial Differential Pressure: 6 PSID
Center Tube: ZINC PLATED CARBON STEEL
End Caps: CARBON STEEL
Hydraulic Filter Div of Parker Hannifin in Metamora OH.
Proudly Made in USA
Alternates: P 031081-3S61, Luber-Finer LH95105V, Carquest 84852
Learn More - PARKER - CPOM3DDN - Pilot Operated Check Valve, D05, 20GPM, 5000 PSI.Special Price $269.98 Regular Price $329.95PARKER - CPOM3DDN – Hydraulic Pilot Operated Check Valve. Size: 3 - NFPA D05 Subplate Mounting Seal: N – Nitrile Cracking Pressure: Omit - 5 PSI Seals: Buna-N (Nitrile) Parker Division: Hydraulic Valve Division Pilot Operated Check Valve: CPOM Poppet Style: DD - Double Poppet A and B Ports Max Flow (at 3000 PSI): 20 GPM (77 LPM) Controlled Ports: A and B Port Series: CPOM Max Pressure: 5000 PSI (350 Bar) Subplate Pattern: NFPA D05 (CETOP 5, NG 10) Parker Group: Hydraulic Crack Pressure: 15 PSI Dimensions: Length 2.76”, Width 1.77” Height 1.57” Removed from Equipment – Excellent Condition Made in USA Learn More
- PARKER - Hydraulic Div - 02.50 CCP2HLT24C 7.000 - Hydraulic cylinder, 2H heavy duty.Special Price $178.98 Regular Price $250.00Out of stock
PARKER - Hydraulic Div - 02.50 CCP2HLT24C 7.000 - Hydraulic Cylinder
Heavy Duty, Industrial fordurability and trouble-free operation with superior design and quality to ensure long cylinder service life.
Status: Discontinued
Series: 2H
Bore: 2.50"
Stroke: 7.00"
Operating Temperature: -10 to 165 F
Fluid Type: Hydraulic Oil
Materials: Steel
3000 PSI.
Specifications Met: ANSI (INFPA) T3 6.7R3 - 2009
Parker - Hydraulic Div.
Additional Information: https://ph.parker.com/us/en/hydraulic-cylinder-heavy-duty-industrial-series-2h-3h-family
Note: LN - Lightly Used
Learn More - NUMATICS - I12BB600MP0061 - Manifold 150-PSIG 2-coil w/ bridge.$145.88Manifold. ISO5599/2 Max operating pressure: 150-PSIG-air. CSA CE. All metric fasteners. With two 236-384B 24VDC 4W coils "with bridge." 41.5 x 68.3mmH x 210mmL plus connectors. Learn More
- Norgren Fluidics - 4LD-010-D00+ - 4LD-010 - Check Valve, Miniature.IN STOCK - MORE THAN 100 READY TO SHIP!
Norgren Fluidics - 4LD-010-D00+ - 4LD-010 - Check Valve, Miniature.
A check valve is the simplest type of directional control valve used in hydraulic systems. Check valves stop the flow of fluid in one direction and allow free flow in the opposite direction. They are also known as non-return valves. Check valves may be used as prefill valves, bypass valves, pre-tensioning or protection of hydraulic components against pressure surges.
Extremely low crack pressures 10-32 UNF or barbed tube connections Direct in-line mounting Control flow direction in medical equipment, instrumentation systems, and in miniature pneumatic control systems.
Duckbill type check - Non-venting
Material: Body - Aluminum, Duckbill - Epichlorohydrin
Crack Pressure: 8" H2O (Pressure required to produce .001 scfm (28.3 cc/m) forward air flow)
This check valves has a 200 x 200 mesh, stainless steel inlet filter screen to protect the duckbill.
Furnished with two adapters for use with 1/16" ID flexible tubing.
Connection: 10-32 UNF.
Tube Connection.
Genuine Norgren Fluics - New Old Stock
Proudly Made in USA
Learn More - Noshok - PGL-C-63-N-C-300 - Gauge, Pressure. 0-3000PSI / 0-20000kPa. New.Special Price $34.98 Regular Price $44.50
Noshok - PGL-C-63-N-C-300 - Gauge, Pressure.
0-3000PSI / 0-20000kPa.
Glycerin Filled.
Connection: 1/4" NPT Threaded Shaft.
Dimensions: 2.5" D x 2.5" high x 1.333" deep.
New - Manufactured in Germany.
Learn More - NORGREN - RM/55463/M/50 - Cylinder, Rroundline, 63mm.Special Price $269.98 Regular Price $365.00
NORGREN - RM/55463/M/50 - Cylinder, Roundline.
Magnet piston as standard – provides a wide range of control options
Attractive clean- line design – enhances installation appearance
Threaded rear end covers on ∅ 32 mm to ∅ 63 mm simplify mounting
Threaded fixing holes in both end covers – increased mounting versatility
Actuator. Single ended.
Dimensions: 63mm.
Piston rod material: stainless steel (Martensitic).
Strokes: 50mm.
Series A.
New Old Stock
Note: Cosmetic Scratch from bulk storage.
Learn More