Hydraulic & Pneumatic

MAX PRESSURE 145 PSI 1.00MPa, 0.60"D shaft with internal thread 2.0 x 2.5"W x 9"L overall CYL COMPACT LONG STK AUTO-SW actuator Learn More

PARKER HANNIFIN CORP - DSH102N - Valve, Threaded Cartridge.

This appears to be just the important insert for the whole valve

DSH102 is a 2-position

2-way, N.O. or N.C.,

Spool-type solenoid operated directional control valve.

DSH102N 26 LPM (7 GPM).

Learn More

NORGREN - RCO21-20-50 - Pneumatic Cylinders.

Pneumatic cylinders, often referred to as pneumatic actuators or pneumatic drives, are used to provide motion and force to industrial automation applications.

Status: Discontinued

Roundline Series

Bore: 20mm 

Stroke: 50mm 

Operating Pressure: 1-10 BAR

Max. Temperature: 80 deg C

Dimensions: 0.867" Diameter x 6.86" Length Rod unextended,

0.312"D Threaded rod with nut

New

Learn More

WATTS REGULATOR CO - B-6800 LC - 3-Piece, Full Port, Brass Ball Valves

3-Piece, Full Port, Brass Ball Valves are used in commercial and industrial applications. It features an in-line maintenance design that offers serviceability of all operating parts without disturbing the piping system. The full port orifice ensures maximum flow capacity. Durafill seats, chrome plated brass ball and blow-out proof stem provide maximum safety and highest operating pressure/temperature limits.

Status: Discontinued

Features

• Used in commercial and industrial applications
• Available in several sizes with solder and threaded end connections
• Designed for maximum safety and highest operating pressure and temperature limits
• In-line maintenance design offers serviceability of all operating parts without disturbing the piping system

1.25" Threaded NPT End Connections

LC  Latch-Lok handles latch and lock in closed position only.

Solid Brass and red locking handle.

Learn More

PARKER WATTS FLUID AIR INC - R119-04CG - Regulator, T-Handle.

High Flow performance for Demanding Applications

1/2" Ports, 0-125 PSA

0-125 PSI Adjustable Regulator (1/2")

Note: Without Gauge

Proudly Made in USA

Learn More

PARKER - H1EWXBG3B9000GB - Pneumatic Solenoid Valve 145PSI Basic Series: HI ISO 5599-1 Size 1 Operator /Function: E Single Solenoid, 2 Position Air Return / Spring Assist Mounting / Base Style: Valve Less Base 5599-1 Port Size / Thread Type: Valve Less Base Pilot Source / Pilot Exhaust: Internal Port #1 Vented & Single Remote Pilot Overrides: G Flush, Non-Locking / Lighted Valve, pneumatic: 145-PSI-max. 1000 kPa Max Solenoid Coil: 24VDC 2.3W P2E-HS32C. CSA Approved. Factory New Learn More

Manifold. Dimensions: approximately 13.25"L x 2.5" square, 9 holes go all the way through. 91-137-130 3H stamped at both ends of 2.23" dia chamber, 0.318[8mm] threaded holes each end. 5 lbs. Learn More

Welker gold-line shot pin 75mm stroke. "The mounting surface for the shotpin must be flat within 0.05mm (0.002") 80.6mm[3.176] square x 21"long - Cylinder: WCP-002 Bore: 63mm Stroke: 75mm. Weight: 21 lbs. General Info: (Rap or Rigid coupler) - Double rod, Extend stop or Retract stop available. Learn More

Cylinder, air. Stroke 4", 145PSI-max. Dimensions: 1.78 x 1.95 x 6.4" long including 0.54"D threaded shaft. Weight: 2 lbs. More info: http://www.coastpneumatics.com/metric/cylinders/cq2_series_cylinders.pdf Learn More

Bimba - CFO-01245-ATJ - Cylinder. Flat-1.

Shaft: 0.5" D.

Mount: flush.

Dimensions: overall approximately 8" long x 2.4" wide x 3.2" high.

Mount is 6-1/2" long x 2-1/3" wide with four mount holes at 6" centers.

New.

Learn More

Pneumatic ImmersionTransmitter / range : 0 - 100 F ( rod and tube 9 1/4" long ) Learn More