Other Process Control

Linear actuator. 500-lbs 115VAC 18"stroke. Requires either MCS-2051 Control or 35uF 240VAC Capacitor. Load: 500 lbs. Voltage: 115VAC. Stroke: 18 inches. Electrak 205. 22 lbs Learn More

FLUID LEVEL SENSING VALVE ASSEMBLY with SPDT-10A 125/250vac Switch.150 W.P. TEMP 250 DEG F 0.8 SP. GR. ( FOR 1" PIPE ) Explosion Proof Enclosure - fixed differential 3/4" Learn More

Allen Bradely ELECTRONIC CORP AMERICA - 42MRR-5000 - Photohead Receiver Sensor.

Photoswitch Beam (A/B) Green Line

Power supply: Type 42MTB bases.

Output: See Output Module.

• 25.4-171MM RANGE
• LIGHT/DARK OPERATE
• 880 NM INFRARED LED
• IP66

Note: Allen Bradley (Rockwell International) purchased Electronic Corp America.

New Old Stock

UPC: 662073836865

Learn More

Warner Electric - ECM 550-DISC-KIT - Disc. Kit.

Sets of (Five Quantity): 412-0027 and (Six Quantity): 412-0026.

Learn More

I/O Module 250VAC 2Amp. Din rail mount. Learn More

MillerEdge - ME151-4 - Guardian Mat.

Size: 14 Inches Square.

For Perimeter Guarding, Machine Guarding.

Outer Material: PVC. Thickness: 5/8.

Color: Black.

Lead Wire: 16 AWG, 10ft long.

Electrical Diagram: 4 Wire, N.O.

Electrical Requirements: 24 Volt, 1/2 amp AC or DC. CE TUV .

Minimum Sensitivity: 66 lbs (30kg) per 3-1/8 (80mm) dia.

Cycle Test: 1 Million.

Size: 14" square.

Temperature Range: -29C to +70C (-20F to 158F).

Fire resistant; Self Extinguishing.

More info: http://www.gatedepot.com/prod_miller/pdf/me151.pdf

Learn More

Measurement Technology - MTL5022 - Loop-Powered Solenoid Alarm Driver IIB, New The MTL5022 enables a device located in the hazardous area to be controlled by a switch or voltage change in the safe area. The MTL5022 can drive any certified intrinsically safe low-power load, as well as non-energy-storing simple apparatus such as an LED. Type: PLC Input/output Module LED indicator Yellow: status Input voltage 20 to 35V dc Hazardous-area output Minimum output voltage: 12.9V at 60mA Maximum output voltage: 24V from 133Ω Current limit: 60mA Maximum current consumption (with 60mA output) 115mA at 24V, typical 135mA at 20 to 35V dc, maximum Maximum power dissipation within unit 1.5W at 24V 2.1W at 35V Safety description 25V, 135Ω, 185mA, Um = 250V rms or dc Status: Discontinued New Learn More

Comptrol - 80-158A - LVDT "Tensioncell" Control board.

115/230V selectable input.

Provides regulated 24V 100mA for each of two LVDTs.

Amplification, filtering and summing of loadcell inputs.

Adjustable zero-out, gain, and for each of four meter outputs.

Learn More

Process control. Programmer, LCD/digital pot. Nema type 1. CAT 1201-HAP / FRN 1.07 Series B. DC input: 12V 0.110Amp. Made in the USA. Learn More

Photoelectric proximity switch with visible redlight. DC 12..240V. AC 24..240V, 2.5Amp. Double marked 0111446. Complete with manufactures operating instructions. Learn More

Photoelectric proximity switch with foreground blanking. DC 10..30V 100mA. Double marked 1011058. Complete with manufactures operating instructions. Learn More

Photoelectric proximity switch. DC 10-30V 100mA out. Double marked 1010807. The WT12 VGA photoelectric proximity switch is an optoelectric sensor and is used for detection of optical, non-contact detection of objects, animals and people. Learn More

Photoelectric reflex switch with polarization filter. Double marked 1011040. Complete with manufactures operating instructions. Learn More

4-20mA CONTROLLER 120V 50/60 40-AMP-LOAD-Resistive Input Impedance 500-Ohms 9"x5.25"x3.75" with big black heatsink - UL-listed Learn More

AND NAND OR NOR Controller DPDT-250VAC-4A-500VA DC:24V 4A, 110V 200mA - Total Serier Inductance and Shunt Capacitance have values restricted to values printed on device -=- -=- Power Req:115VAC 3.5WApproved Intrinsically safe by USA-FM[3610] & W Germany-PTB & Austrlia-SAA & Switzerland-SEV, Made in Germany & Twinsburg, Ohio Either used (but no wiring apparent) or New Old Stock & dusty (probably) - either way, it's guaranteed functional by ESI Learn More

EATON CUTLER HAMMER OPCON - 1550B-6501 - Photoelectric Fiber Optic Sensor.

Enclosure Material: Body: Noryl, Lens: Nylon

Environmental Rating: NEMA 1,3,4,12,13

Input Voltage: 90-132 Vac

Led Indicators: Red output status

Operating Mode: Fiberoptic, Infrared

Operating Temperature: -40° to 158°F (-40° to 70°C)

Sensor Type: Fiberoptic

Switch Type: Photoelectric

Alt P/N: 106983.

UPC 782113825595

Made in USA 

New

Learn More

I/O relay board, mounting rack. G4, with head connect, brain board compatible, 32 channel/B4 brai. Learn More

CUTLER HAMMER OPCON - 8713A-6501 - Relay, One Shot.

Alt P/N: 102166.

Plastic Enclosure.

Made in USA

New

Learn More

Logan Lundahl Instruments - DCU-A - 6-WIRE ULTRASONIC SENSORs with Adjustable Trip-point and Sensitivity.

The DCU series sensors use ultrasonic technology to provide a non-contact method of determining distance or level measurements.

Dimensions: 2" Square x 3.6" Long.

A Division of EZRA C LUNDHAL, INC 

Note: California-based Scientific Technologies Inc aquired Logan Lundahl Instruments.

New Old Stock - Made in USA

Learn More

4-20mA CONTROLS 25AMPS @ 600VAC 50/60Hz 1-Phase Input Impedance 500-ohms 6"x4.7"x4"tall built into heatsink Learn More

Cutler-Hammer / Eaton -  E57MCL12T111 - Premium Proximity Sensor,

PNP, Open Collector.

E57 Inductive PNP sensor NO-NC

12mm, 303 Staunless Steel Enclosure

10-30VDC 500mA max, with Viewable 360 degree LED.

Sensing Range: 2MM

Accuracy: <1% Sensing Range

4 Wire, Polyvinyl Chloride (PVC) Cable

Package: Tubular.

Protection: Auto Reset

Temperature: 13F to 158 F

Dimensions: L 2.46" X H 0.47" X w 0.47"L

Cord Length 79.2"

CSA Certified, UL Listed

In Manufafcturer's Packaging with Instruction/Datasheet

UPC 78-2113-12540

Made in Germany

Learn More

Black box for type J T/C degrees F - 120VAC 50/60Hz Made in USA Learn More

Cordset. Profibus cable (premolded). DB9 male to a 4 Position female micro connector. Note: ALT P/N: U0334-2. Learn More

Replacement core shell type 963-2v X09110254-01 (H9516) Learn More