Other Process Control

GEMCO - 404S21121YAA1 - Stock One Switch, Rotary.

Commercial Industrial Quality Switch

Contacts: 1P2T.

Maximum Voltage: 300

Actuator: Momentary.

Mechanical: Panel, 4 Contacts.

Mounts in a 0.85" hole, complete with 4 metal washers, one cork and one locating pin.

Note: Selector switch with adjustable cam.

Each Switch consists of End Plate, Cover, One Contact Block, Deten Mechanism, Operator, and Switch Body.

Genuine Vintage GEMCO - New Old Stock

In Manufactures Original Packaging with Instruction Sheet.

Alternate: GE 404S21121YAA1, 625896-18

Proudly Made in USA

GEMCO - 404S32121YAA33 - Stock One Switch, Rotary.

Commercial Industrial Quality Switch

Contacts: 2P3T.

Maximum Voltage: 300

Actuator: Momentary to Right and Left.

Mechanical: 2 Panels, 8 Contacts Sets.

Mounts in a 0.85" hole, complete with 4 metal washers, one cork and one locating pin.

Note: Selector switch with adjustable cam.

Each Switch consists of End Plate, Cover, Two Contact Blocks, Deten Mechanism, Operator, and Switch Body.

Genuine Vintage GEMCO - New Old Stock

In Manufactures Original Packaging with Instruction Sheet.

Alternate: GE 404S32121YAA33

Proudly Made in USA

GEMCO - 404S34121YAA3A11 - Stock One Switch, Rotary.

Commercial Industrial Quality Switch

Contacts: 2P3T.

Maximum Voltage: 300

Actuator: Momentary to Right side and Contiuous to Left.

Mechanical: 2 Panels, 6 Contacts Sets.

Mounts in a 0.85" hole, complete with 4 metal washers, one cork and one locating pin.

Note: Selector switch with adjustable cam.

Each Switch consists of End Plate, Cover, Two Contact Blocks, Deten Mechanism, Operator, and Switch Body.

Genuine Vintage GEMCO - New Old Stock

In Manufactures Original Packaging with Instruction Sheet.

Alternate: GE 404S34121YAA3A11, 626662-01

Proudly Made in USA

TURCK - FKFD12-0.8 - M12 Eurofast Receptacle Female Connector Rear Mount Cordset 12-pin Panel Mount Socket

The FKFD 12-0.8 is a 0.8m Sensor Cable with 12-position receptacle to free end connection. This sensor cable comes with a nitrile O-ring, gold-plated brass contacts, housing and locknut.

M Series Connector, U-01841 | TURCK FKFD 12-0.8

60VAC/75VDC-2Amp EuroFast Rear Mount with Leads

Female Receptacle Panel Mount (Bagged w/Nut )

12-conductor wired with #24AWG 0.8meters long,

Contacts: 12 Gold Plated, Brass

Mates with 12-pin Cordsets

Connector Size: M12 x 1.00

Current Rating: 2A

IP Rating: IP68

Lenngth: 0.8 m

Temperature: -40 C to 105 C

Approvals: UL,CSA

Factory New

HEDLAND - 526-002-DCR - DC Flow-Alert Flow Limit Switch, 1A @ 24VDC

This is the Flow Limit Switch for EZ-VIEW FLOW METERS (Not Supplied) - using Hall Effect-triggered (Normally Open) Relay hermetically sealed in encapsulating compound, within Polysulfone module. The Relay, when Activated, is designed to directly control warning lights, alarms or digital inputs. WHEN CONNECTED TO THE FLOW METER (NOT SUPPLIED) The Set Point is: 0 - 100% of full scale 1-1/4" ID for Flowmeter

Supply Voltage: 9-24 VDC

Supply Currrent: 90 mA

Contact Rating: 1A @ 24VDC

Set Point: 0-100% of Full Scale

Operating Temperature: 32-158F

Includes Installation Instructions

Factory New

GEMCO - 404S32121YAA3 - Stock One Switch, Rotary.

Commercial Industrial Quality Switch

Contacts: 1P3T.

Maximum Voltage: 300

Actuator: Momentary each side.

Mechanical: Panel, 4 contacts.

Mounts in a 0.85" hole, complete with 4 metal washers, one cork and one locating pin.

Note: Selector switch with adjustable cam.

Each Switch consists of End Plate, Cover, One Contact Block, Deten Mechanism, Operator, and Switch Body.

Genine Vintage GEMCO - New Old Stock

In Manufactures Original Packaging with Instruction Sheet.

Alternate: GE 404S32121YAA3, 625896-18

Proudly Made in USA

Square D Schneider Electric - 9001TS6 - Switch, Rotary.

Engineered to resist the ingress of solid foreign objects, water, corrosion, ice, oil, and non-corrosive coolants in indoor and outdoor environments.

Status: Discontinued

Selector Switch Operator, 3 Position, Maintained

30mm.

Heavy Duty 3-Position

Black Knob

Type T

Series A.

Foundry 3 Position Cam F Black Manual Return.

New Old Stock

Alternate: 84703, 9001KS73B

Proudly Made in USA

OAK INDUSTRIES - WU048D2-283 - 48VDC 2 N.O. 2 N. C. Industrial Relay

Coil: 48VDC

Coil Resistance: 975-OHM 

Connections: 10 Lug Spade Socket or Quick Disconnects

Load Current: 25Amps 240VAC Resistance

1HP 120VAC, 2HP 240VAC 50/60 Hz

Hermetically Sealed Can with Grounding Stud and Mounting Plate

Genuine Vintage Oak Industries - New old Stock

Proudly Made in USA - CSA

NAMCO CONTROLS - RK93/2-501 - Infrared Scanner

2.5" - range modulated beam.

Supply: 24VDC.

PNP Output.

New, complete but without housing over PC board.

May also be listed as PK93/4-60(S).

WEHO - S-400-24 - Power Supply, DC, Switching. 400 Watt, 24 VDC, 17 Amp

Connect this unit to 110 or 220 Volts AC household power, and it will supply 400 Watts at 24 Volts DC and 17 Amps.

This power supply has been engineered specifically for use with DC motors. Most power supplies designed for use with LED lighting or other electronics will simply shut down when exposed to the high current demands of motors. Built-in current limiting protects the unit from overloads and short circuits. The current limiting feature enables these power supplies to keep functioning through the high-current start-up surges from motors. AmpFlow power supplies will just limit the current to the rated maximum even when a larger load is called for, (like when a DC motor starts up). Also, inductive loads (like motors) can cause damage to power supplies that are not designed for them.

These power supplies also work well in any application where AC line voltage needs to be converted to DC voltage. Other uses include LED lighting, HAM radio, battery charging, and replacing plug-in AC adapters when more power is required.

Short-circuit and overload protections help these units survive harsh operating conditions. The power supply shuts down temporarily if the temperature, current, or voltage goes beyond the safe operating range, and it starts up again automatically when the condition goes away – no rebooting is necessary.

This high-efficiency power supply has an output voltage that is adjustable by plus or minus 10%. It includes an EMI filter to minimize interference with radio signals and a soft-start circuit that reduces the AC inrush current peaks. Every power supply goes through a full-load burn-in test, so no defective unit leaves the factory.

DC output voltage: 24V

DC output current: 17A

DC output voltage error: ±1%

Ripple & noise: 150mV

Efficiency: 86%

AC input voltage range: 85-132VAC/170-264vac 47-63HZ 

Input current: 6.5A/115V 4A/230V

AC inrush current: Soft-Start Current 25A/115V 50A/230V

Leakage current: 3.5mA/240VAC

DC adjustable range: ±10% rated output voltage

Over load protection: 105-135% cut off the output auto -recovery

Over-voltage protection: 115-135 cut off the output auto -recovery

Setup rise hold up time: 200ms 50ms 20ms

Withstand voltage: I/P-O/P:1.5KVAC 1minute, I/P-FG:1.5KVAC 1minute, O/P-O/P:0.5KVAC 1minute

Withstand temperature: -10°C~+60°C,20%-90% RH

Dimensions: 8.5" X 4.5" X 2.0"

Weight: 1.05kg (2 Pounds)

This unit meets all the following safety and EMC standards: UL 1950, EN60950, EN55022, IEC100-3-2, CE, ROHS

Applications: Motor Controllers, CNC, Industrial Automation, LED Strip Lights, CCTV Power Supply , AC/DC Adapter.

Alternates: AmpFlow S-400-24, Meanwell 2-400-24, Mulview S-400-24, Mingwei S-400-24

Factory New

Japan Servo Motors - KH42HM2-852 - 1.8 Degree 2 Phase Hybrid Stepping Motor

Commerical Quality KH42 Series 800 Type High efficiency, High Torque, Low Vibration and Low Noise Motor.

Much improved quality and performance over the chinese Nema 17 Stepper Motors on Amazon & Ebay! Very nice upgrade for 3D printers at a great price!

This new series 800 type, which maintains the high torque performance of our conventional 500 Type and lower vibration and noise. High efficiency and high torque have been achieved through our intensive research on magnetic circuitry. A unique  tooth profile has been employed through the development of a new  proven theory to achieve low vibration and low noise. 

Specifications 

NEMA 17

Drive Method - Uni-Polar 6 Wire

Bearing Description

Step Angle - 1.8 Degrees/step

Voltage - 24 Volts 

Current - 0.38 Amps/Phase

Winding Resistance - 22.4 Ohms/Phase

Inductance - 21.5 mH/Phase

Holding Torque - 2.0 kgf cm (28 ounce inch)

Detent Torque - 150 gf cm (2.1 ounce inches)

Rotor Inertia - 42 g cm2 (0.23 ounce inches)

Weight -  260 g (0.57 Lbs.) 

Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)

Insulation resistance  500 VDC 100Mohm min.

Dielectric Strength - 500 VAC 50 Hz 1 minute

Operating Temperature Range 0 - 50C

Allowable Temperature Rise 70 degrees

Dimensions 1.65" X 1.65"  X  1.34" (42mm X 42mm X 34 mm Max) 

Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.

NEMA 17

Drive Method - Uni-Polar 6 Wire

Bearing Description

Step Angle - 1.8 Degrees/step

Voltage - 24 Volts 

Current - 0.38 Amps/Phase

Winding resistance - 22.4 Ohms/Phase

Inductance - 21.5 mH/Phase

Holding Torque - 2.0 kgf cm (28 ounce inch)

Detent Torque - 150 gf cm (2.1 ounce inches)

Rotor Inertia - 42 g cm2 (0.23 ounce inches)

Weight -  260 g (0.57 Lbs.) 

Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)

Insulation resistance  500 VDC 100Mohm min.

Dielectric Strength - 500 VAC 50 Hz 1 minute

Operating Temperature Range 0 - 50C

Allowable Temperature Rise 70 degrees

Dimensions 1.65" X 1.65"  X  1.34" (42mm X 42mm X 34 mm Max) 

Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.

ApplicatIons: RobotIcs,  3D Printer,  Arduino,  CNC,  Router.

KLOCKNER MOELLER - NHI11-PKZ0

Auxiliary Contact 1NO and 1NC 15Amp

Eaton - Cutler-Hammer - E57-18LU08-D  Switch, Proximity.

Premium Series -Inductive

Output: Normally Open

Sensing Range: 8mm.

Supply: 10-50VDC 200mA.

Max. Load Current: 0.25 Amps

Body Composition: Metallic

Status Indication: LED

Connection: 2-meter 2-conductor unshieded cable.

Body: 18mm diameter, threaded with two nuts.

Non Embedable.

Short Circuit Protected / Reverse Polarity Protection

With Wiring Diagram.

UPC 782113922478

UL, CE Approved.

Automation Direct DT-08TR Process control. 8 Channel relay 5-30VDC or 5-250VAC output module. 8 Form A (SPST). Used/Removed from equipment.

TURCK - WK4.4T-2/S90-SP Cordset Eurofast.

Coiled with 4 pin female micro-connector.

Part Number: WK 4.4T-3.3-WS 4.4T/S90-SP

ID Number: U2291-0

Connector: M12 Eurofast

Configuration: Right Angle

Gender: Female connector

Plug Body Style: Standard plug body

Coupling Nut: Nickel plated brass

Number of Wires: 4 Wire

Barb Option: T barb

Length in Meters: 3.3

Configuration 2: Right Angle

Gender 2: Male Connector

Plug Body Style 2: Standard Plug Body

Coupling Nut 2: Nickel plated brass

Number of Wires 2: 4 Wire

Barb Option 2: T barb

LED Option: No LEDs

Cable Type: PUR jacket, flexlife

Alt P/N: U2424.

TRI-TRONICS - SEC-6 Cable, cordset.

Micro-change 4 Pin female, single ended.

22-4C, 300V, 105 Deg C.

Shield: Foil with drain.

Length: 6 foot.

Color: ellow.

Compatible with: SMARTEYE® MARK II, SMARTEYE® Mark III, OPTI-EYE®, EZ-EYE®, MINI-EYE™, DC MITY•EYE®, SMARTEYE® STEALTH-UV, SMARTEYE® COLORMARK™ II

Trend Instruments, Inc. - V25-UBP-31-05-0/100 Thermometer.

Vapor Actuated Gauge.

Range: 0 to +100 Deg F (115 to +37 Deg C).

Mount: Panel, single Hole 2.602" (66mm) Diameter.

With a copper wire to sensor.

New Old Stock.

Made in USA