Other Process Control

OPTO 22 - G4D16R  Remote Digital 16-Channel Multifunction I/O Unit Mistic Protocol.

Remote digital 16-channel multifunction I/O unit, mistic protocol. Model 200.

Mount: PCB, Rack

Current Rating: 250 mA

Input Current: 250 mA

Operating Temperature: 0 C to 70 °C

Number of I/Os: 16

Operating Supply Voltage: 24 V

Output Type: Digital

Turn-Off Delay Time: 1 ms

Turn-On Delay Time: 1 ms

Dimensions: Depth 266.7 mm, Length 111.3 mm, Width 130 mm

 

 

Learn More

AC, 120V Output Module. Contains the output circuitry necessary to control the On/Off status of eight user devices. Application: for AC motor starters, indicators, solenoids. Factory NIB. Complete with 10 Point terminals strip and the manufactures specification sheet. Learn More

Data Highway / RS-232-C Interface module. Rev E03. Communication controller. Note: Alt P/N: 96518902 D01. Series A. Filmware Rev J. New. Learn More

AEG Modicon - A020/ERW/220V - Logistat A020, Programmable Controller

Status: Discontinued

Power: 110/220V 50/60Hz.

A020/ERW/220V

7628-042.200594.08

"CP80" Compact Logistat A020 (PLC) automation unit and an extension unit as a superordinated control system.

Dimensions: 11.0" x 4.0" x 8.0"   (27.9 cm x 10.2 cm x 20.3 cm)

Weight: 6.25 lbs.

New

Learn More

AEG - A020/E/220V - LOGISTAT A020 PLC Automation & Extension Unit Status: Discontinued 110/220V 50/60Hz 6.25-lbs box:"CP80" compact Logistat A020 (PLC) automation unit and an extension unit as a superordinated control system. E-Nr.424-200568.12 New We Also have one used Available - CYLINDER CART Learn More

Fieldline modular device with (4) digital inputs and (4) digital outputs, 5pos 2amp.http://eshop.phoenixcontact.com/phoenix/pdf.do?UID=2736107&general=usenManuf in Germany Learn More

Flexible Interface Module with SB3T08 and SB38YL boards Learn More

SICK OPTIC ELECTRONIC - LUT3-920 - Luminescence Sensor 12-30VDC 100mA out. Sensing Distance: 20mm Wave Length: 375 NM Receiving Range: 450-750 NM Switching Frequency: 1.5 kHX Double marked 1019286. Housing Material: Die-Cast Zinc. Connection Type: Connector M12, 5-pin. UV-LED. Complete with manufactures operating instructions. Made in Germany Factory New Learn More

SICK OPTIC ELECTRONIC - CS1-P3611 – Colour Sensor. Status: Discontinued Q=PNP, Output 12-30VDC 100mA out. 60mm Sensing Distance 5 Pin, M12 Connector Double marked 1012859. Housing Material: die-cast zinc. Connection Type: Connector M12, 5-pin. UV-LED. Complete with manufacturers operating instructions. Made in Germany Factory New Learn More

PROGRAMMABLE CONTROLLER - OMRON C200H-BC101-V2 Base Unit with CPU01 including Memory Unit C200H-MR431. Also Includes 8 Cards:  IA122(3) IM212(1) OC221(1) OC222(3)

Learn More

KEYENCE - AT-210 - Digital Contact Sensor Amplifier Control Module.

Status: Discontinued

Output Voltage: -0.5 ~ +0.5 V.

Output Impedance: 300 Ohm.

Supply voltage: DC12-24V, 10% ripple (PP) 10%.

Measurement Range: -5.0 to +5.0 mm-0.197" to 0.197"

Analog Output Voltage

Output Voltage:  -0.5 to +0.5 V

Impedance: 300 Ω

Resolution: 10 µm 0.39 Mil

Linearity: 0.8% of F.S.

Response: DC to 800 Hz (-3 dB)

Measurement Force: 0.28N*1

Temperature Characteristics: 0.03% of F.S./°C*2

Connection Cord Length: 3 m

Power Voltage: 12 to 24 VDC ±10 %, Ripple (P-P) 10 %

Current Consumption: 50 mA or less

Ambient Temperature: 0 to +50 °C 32 to 122 °F

Relative Humidity: 35 to 85 % RH (No condensation)

Din Rail Mount

Dimensions: Width:7.00 (in)Height:6.00 (in)Depth:7.00 (in)

Weight: Approx. 100 g

Complete with a 4 conductor cable 9 foot, and attached 4 pin male micro connector.

Made in Japan

New

Learn More

CNC Programming Terminal. Complete with DB9 male to DB9 male power cord and keys. Keypad is missing some buttons, see photo. Learn More

Driver module parallel link. Learn More

Lite-Pac Trigger Module "LASER TRIGGER FLASH TUBE?" SS TUBE APPROX 1.5" X 4" long wire leads New. Learn More

FM-3. Programming module. Double marked EN-204. Input: 240VAC 8.5Arms 50/60hz 1 phase. Out:240vac 4.5Arms 3 phase.With attached 3 conductor power cord. P/N 960500-07 Rev A2. S/N 9744A015. Learn More

Cutler-Hammer / Eaton - ELC-PA10AADT plus 4 I/O Modules

At less than half the size of most PLCs, the Cutler-Hammer. ELC is an ideal solution when space is at a premium and specialized I/O needs present themselves.

(1)-ELC-PA10AADT: Logic Controller

PLC; 10 I/O

6-In 4-Output Module capacity.

Plus (1)-ELC-AN02NANN: Analog 2-point Output unit.

And (2)-ELC-EX08NNAN Digital Input units, 8-point AC.

Plus (1)-ELC-EX16NNDR Digital I/O 8-In and 8-Relay Out Expansion module.

Original boxes and cables, instructions with Instruments.

Additional Information: 66ed730e5dd7fa35cdbdbdff6fa8ca70.pdf

https://www.eaton.com/content/dam/eaton/products/industrialcontrols-drives-automation-sensors/legacy-page---logic-and-io-legacy-products/elc-modular-plcs/IL05003010E%20ELC-PA10AADx%20ELC%20Analog%20Controllers.pdf

New

Learn More

SLC500 Processor / Controller 4-Channel T/C & mV Input Module - Thermocouple Types J, K, T, E, R, S, B, N, �50mV, �100mV and CJC. 1746-NT4 provides a choice of four filter frequencies, permitting you to select input noise filtering appropriate to the application and surrounding environment. Either or both 50 Hz and 60 Hz noise can be filtered from the input signal for greater noise rejection and resolution. The 250 Hz filter provides minimum noise rejection and is best suited for mV input applications where fast response to step changes is required. Learn More

Warner Electric / Superior - 5371-273-047 - Clutch Brake EUM -215-1020 90V.

The electric clutch and brake has been called the best thing that ever happened to the electric motor. It’s simple, electric clutches and brakes do all the work, while permitting motors to run smoothly and continuously at their most efficient speed by connecting/disconnecting the motor and the load. Fast starts and stops, easy control interface, remote pushbutton operation and smooth acceleration and deceleration are outstanding user benefits.

EUM (black) units are totally enclosed to keep wear particles in and exclude contaminants and are suitable for most industrial applications.

Voltage: 90DC

NEMA Frame Size: 213TC/215TC

 

Learn More

Motor, brake. 90VDC 29 watt 3600RPM. Clutch. UM180-1020 Unimodule FBC 143/145TC frame. Learn More

Precision Bare Fiber Adapter for PHOTODYNE SENSOR HEADS. Designed to accommodate 4-8 mil single mode fibers ( up to 250 micrometers ). For fibers with a protective cable, a clamp assembly is also supplied. Learn More

Phoenix Contact - CM175-PS-120AC/24DCU/10 (CM175PS120AC24DCU10) - Compact Process Control Power Supply.

Low 5% Ripple Din 19240

Power Supply Output 24VDC 10Amp output,

Input 120VAC Iinput 50/60 Hz. Inrush current approx. 3.0A

Poweer consumption  Approx. 370 VA

Efficiency >/= 0.80

Input Fuse 7 At

Ul198G

Dimensions 175X155X183 MM

Weight 6.6 kG

DIN-Rail mount.  Retails for nearly $2000

Detailed Specifications https://datasheet.octopart.com/2940443-Phoenix-Contact-datasheet-13076715.pdf

Learn More

Port expander. 4 Port expander for use with Allen-Bradley PLC2 family of controllers. With operating instructions & software. Learn More

NC Unit for Pulse Output for PROGRAMMABLE CONTROLLER- 12-24VDC@10MA-INPUT 5VDC 20MA OUT NEW IN BOX Class 2 with 3.6V Lithium Battery - battery not guaranteed - Single Axis Servo Module STEPPER-C/CVSERIES Learn More

Process control. Analog input module. Single phase. AC servo driver 100/115VAC 2.6Amp 50 watt. Learn More