Solenoid
- Unidentified MFG - 411823-1 - Solenoid, Laminate Open Frame AC. Coil: 26VAC, 0.75A, 5.5 Ohms.IN STOCK - MORE THAN 500 READY TO SHIP!
411823-1 T-Shaped Solenoid, 26 VAC Coil.
This solenoid has a T-shaped laminated design plunger and laminated steel frame. It has the unique ability to hold an exceptionally heavy load with a minium of humming or vibration. To minimize the humming or chattering of most AC solenoids, the contact surfaces of the laminated frame and plunger are machined to provide a smooth and flush contact surface.
Solenoid consists of a laminated steel frame, a coil, and a movable plunger in the center of the coil. When the coil is energized the plunger is pulled into the coil.
Operation: Pull.
Load Force: >48 oz.
Stroke Length: 0.6".
Duty Cycle: Continuous.
Coil: 26VAC 0.75A 5.5 Ohms.
Plunger Configuration: Rectangular w/pin-in-U.
Mechanical: 8 holes on Base.
Body Dimensions: 1.2"x1.5"x2.5" .
Weight: 0.42 lbs.
Connection: 3/16" Male Solder Spades.
Applications: Wurlitzer Solenoid 411823-1 Turntable Speed Shift Coil.
Seeburg M100C Phonograph Latch Bar Solenoid
Seeburg SS-160 Showcase Jukebox
Science Projects
Similar to Dormeyer or Guardian Electric Industrial/Commercial Solenoids tailored
for high force, short stroke solutions. Continuous or intermittent duty; on/off operation; standard and laminates with life from 50,000 to 100,000 cycles, offering pull-in engagement which is well-suited to lock/latch operations.Alternates: SOL-20.
Note: We have Solenoids with the power connections on either the left or right side. See last two pictures to identify options and advise if you need specific right or left connections.
USED May have some rust on the frame.
Learn More - Meletron - 137 - Solenoid, DC. Coil: 26VDC 12A 2.7 Ohms.Special Price $17.48 Regular Price $31.99Out of stockSolenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 0.75. Duty cycle: intermittent. Coil: 26VDC 12A 2.7 Ohms. Plunger config: round w/ 1/4-32 hole. (Will extend approximately 3/4" away form unit). Mech: square flange/4 holes. Dimensions: overall 3" x 2-1/2" x 2-1/4" high. Weight: 2.2 lbs. Connection: 8-32 studs for coil connections. Learn More
- MAGNET SCHULTZ OF AMERICA - MSA 6635/0020 - S-06635 - Solenoid, DC. Coil: 24VDC 0.33A.Out of stock
MAGNET SCHULTZ OF AMERICA MSA - 6635/0020 - S-06635 Solenoid, DC.
Magnet-Schultz of America (MSA) is a leading innovator and manufacturer of electromagnetic devices including standard, specialty and totally custom—solenoids, actuators, voice coils and value-added assemblies.
Operation: Pull.
Load force: >48 oz.
Stroke Length: 1" .
Duty Cycle: Continuous.
Coil: 24VDC 0.33A 72 Ohms.
Plunger Config: Round w/Slot & Hole.
Mech: 2 pairs of side holes.
Body dim: 0.95"x1.2"x1.95".
Weight: 0.28 lbs.
Connection: 3/16" Male Quick connect Spades.
Additional Information: https://www.magnet-schultz.com/en/solenoids
Learn More - GUARDIAN - A420-060997-00 - 24VDC solenoid 1/2" Dia x 1" Long - Tiny !IN STOCK - MORE THAN 100 READY TO SHIP!
GUARDIAN - A420-060997-00 Solenoid
24 VDC Tiny SOLENOID
0.5" DIA x 1" Long - ROUND W/ BASE MT
0.195" plunger with locking device at tip
E120-59
Addressograph Multigraph P/N E120-59 - Rare - an't find these anymore
Vinatge New Old Stock
Learn More - RBM CONTROLS ESSEX - 70-120226-5 - 36V METAL HI CURRENT SOLENOIDSpecial Price $14.98 Regular Price $32.78READY TO SHIP - ONLY 49 LEFT IN STOCK!
RBM CONTROLS/ESSEX - 70-120226-5, PS50053-5-2 High Current Starter Solenoid Relay
36VDC METAL HI CURRECT SOLENOID RELAY (SPST N.O.)
Estimating 200Amps Solenoid
Two Large Copper Contactor Terminals: 5/16-24,
Single Coil Terminal: 10/32, Case Ground.
Flat Flange mounting with two large slots 2.1" apart.
Extra heavy duty corrosion resistant steel body.
Marked 70-120226-5 RFE looks in good condition
As Removed - Used
- PSP MFG - SD-118-L - SOLENOID 30VDC$11.9630VDC SOLENOID Heavy - 1.5"OD cylindrical - threaded plunger 0.61"OD - two "wings" for mounting (undrilled) 2-pin MS connector - Aircraft surplus - NEW Old Stock Learn More
- MAGNET SCHULTZ OF AMERICA - S-06675 - 24VDC Pull Solenoid, Continuous Duty.Special Price $10.98 Regular Price $14.50
MAGNET SCHULTZ OF AMERICA - S-06675 - NEW
24VDC, 11.0 Watt, Pull Solenoid Box Frame Solenoid
holding Force: 198 Oz
Maximum 5 oz at 0.5 inches stroke, Minimum 48 oz at 0.12 inch
52-0hm Coil - Continuous Duty
Box Frame Body: 1.622" x 1.441" x 1.752".
Additional Information: https://magnet-schultzamerica.com
Learn More - GUARDIAN - A420-062396-00 - Solenoid, AC. Coil: 115VAC 0.3A 63 Ohms.READY TO SHIP - ONLY 16 LEFT IN STOCK!
GUARDIAN - A420-062396-00 Solenoid, AC.
Operation: Push.
Load force: >16 oz.
Stroke Length: 0.3.
Duty cycle: Intermittant.
Coil: 115VAC 0.3A 63 Ohms.
Plunger Config: Round w/.75" knob.
Mech: 4 8-32 holes.
Body Dimensions: 1.65"x1.45"x2.3".
Weight: 0.55 lbs.
Connection: 5" 18 ga. leads.
Learn More - GUARDIAN - A420-060761-00 - Solenoid, DC. Coil: 170VDC 0.109A 1560 Ohms.Special Price $14.98 Regular Price $18.50READY TO SHIP - ONLY 15 LEFT IN STOCK!
GUARDIAN - A420-060761-00 Solenoid, DC.
Operation: open/close.
Load force: >48 oz.
Stroke length: 1.
Duty cycle: continuous.
Coil: 170VDC 0.109A 1560 Ohms.
Plunger config: round w/slot & hole.
Mech: 2 pairs of side holes.
Body dim: 0.95"x1.2"x1.95".
Weight: 0.27 lbs.
Connection: 6" 22 ga leads.
Note: Alt P/N: E120-54.
Learn More - GUARDIAN - A420-059001-00 - Solenoid New 24VDCREADY TO SHIP - ONLY 20 LEFT IN STOCK!
GUARDIAN - A420-059001-00 Solenoid
24VDC @ 250ma
Dimensions: 1-3/4" long x 1/2" x 1/4 plungerwith 1" pull @ 24VDC .
Unit measures 1-1/2" high x 1-3/4" deep x 1-1/8" wide.
Unit can be flush mounted by any of eight 3/16" holes.
New Old Stock
Learn More - MAGNET SCHULTZ OF AMERICA - MSA 6244/004 - S-06244 - R24X13 - Solenoid, DC. Intermittent Duty Cycle 24VDC Pull.Special Price $12.98 Regular Price $14.50
MAGNET SCHULTZ OF AMERICA - MSA- 06244 - S-0-6244 - R24X13 - Solenoid, DC.
Intermittent Duty Cycle
24 VDC Pull
14 Ohm Coil, 100 ounce.
Maximum 118.7 oz at .025 in., Minimum 92.5 oz at .025 in.
Primary Function Pull, Intermittent Duty Cycle.
Package: Cylindrical 1.5" OD x 2" Long.
Threaded Bushing Panel Mount.
Note: REGDON 24VDC-ID.
Proudly Made in USA
Learn More - GUARDIAN - A420-064182-00 - Solenoid, DC. 24VDC 0.3Amp.IN STOCK - MORE THAN 100 READY TO SHIP!
GUARDIAN - A420-064182-00 Solenoid, DC.
Operation: Pull in Against Spring Load Force: >16 oz.
Stroke Length: 0.5 Inch.
Duty cycle: Continuous.
Configuration: D-Frame
Coil: 24VDC, 0.3 Amp, 77 Ohms.
Plunger Configuration: round w/ slot & hole.
Connection: Polarized Coil w/internal diode, narrow pin (+).
Special Features: Heavy duty
Mounting Mechanical: 2 6-32 holes in base.
Overall Body Dimensions: 1.4"x0.85"x2.75".
Weight: 0.2 lbs.
Learn More - MAGNET SCHULTZ OF AMERICA - S-06625 - Solenoid, DC. Voltage: 24VDC.Special Price $12.98 Regular Price $14.50
MAGNET SCHULTZ OF AMERICA - S-06625 - Solenoid, DC.
Voltage: 24VDC, 5W.
Continuous Duty Cycle
Coil Resistance:15 ohm
23 ounce at 0.05 inch.
Box Frame 1.2"x1.2"x1".
Additional Information: https://magnet-schultzamerica.com
Learn More - MAGNET SCHULTZ OF AMERICA - S-06224 - Solenoid, DC. Coil: 24VDC 0.83A, Family R16X9.Special Price $10.98 Regular Price $14.50
MAGNET SCHULTZ OF AMERICA - S-06224 - Solenoid, DC. Family R16X9
Operation: Pull.
Holding Force: 125 Oz
Load force: >48 oz.
Stroke length: 0.5.
Duty cycle: continuous.
Coil: 24VDC, 19W, 0.83A 29 Ohms.
Plunger config: Round w/slot & hole.
Mech: 3/4-24 Collar w/Nut.
Body dim: 1"D x 2"L.
Weight: 0.22 lbs.
Connection: 5" 22 ga leads.
Additional Information: https://magnet-schultzamerica.com/
Learn More - MAGNET SCHULTZ OF AMERICA - MSA - S-0-6171 - Solenoid, tubular Cylindrical, 12VDC.READY TO SHIP - ONLY 46 LEFT IN STOCK!
MAGNET SCHULTZ OF AMERICA - MSA - S-0-6171 Solenoid, Tubular Cylindrical.
Pull type, 12VDC/72 Ohm coil.
Holding force: 4.5-oz.
Duty: Continuous.
Body dimensions 0.44"-OD x 1.67".
Long threaded bushing mount; max pull from end of shaft is 1".
Armature size: 1.44" long x 0.157" D.
Nut and washer provided.
Learn More - MAGNET SCHULTZ OF AMERICA - MSA/0022 - Solenoid, DC. 12VDC.Special Price $10.98 Regular Price $14.50READY TO SHIP - ONLY 1 LEFT IN STOCK!
MAGNET SCHULTZ OF AMERICA - MSA/0022 Solenoid, DC.
Magnet-Schultz of America (MSA) is a leading manufacturer of specialty and custom Magnetic Latching Solenoids and Magnetic Latch Mechanisms. These energy-saving products provide a bi-stable device that requires “zero power” to remain in either the magnetically-latched or unlatched position.
12VDC.
Tubular/Cylindrical
Dimensions 0.44" D x 1.662" Long including unextended Rod 0.157" D.
Alternate: R 7X9/6172
New
Learn More - GUARDIAN - A420-057784-00, E120-31 - Solenoid. 120VAC Int duty.Special Price $10.98 Regular Price $14.50READY TO SHIP - ONLY 19 LEFT IN STOCK!
GUARDIAN - A420-057784-00 Solenoid.
Voltage: 120VAC Intermittent duty.
With 0.5 uF 400VDC capacitor.
Learn More - MAGNET SCHULTZ OF AMERICA - S-06384 - R8X16 - Solenoid, DC. Coil: 24VDC 0.12A 192 Ohms.Special Price $12.98 Regular Price $16.50
MAGNET SCHULTZ OF AMERICA - S0-6384 - R8X16 Solenoid, DC.
Operation: Pull.
Load Force: 4.5 oz.
Stroke length: >1.
Coil Resistance: 193 Ohms
Duty Cycle: Continuous.
Coil: 24VDC 0.12A 192 Ohms.
Plunger config: Tubular.
Mech: 3/8" threaded bushing w/ nut.
Body dim: 0.5"H x 2.65"L.
Weight: 1.5 oz.
Connection: 2" behind panel.
Note: Regdon R8X16-6384.
Additional Information: https://magnet-schultzamerica.com/
Learn More - MAGNET SCHULTZ OF AMERICA - S-06173 - R7X9/6173 - Solenoid, DC. Coil: 24VDC 0.083A.Special Price $12.98 Regular Price $14.50
MAGNET SCHULTZ OF AMERICA - S-06173 - R7X9/6173 Solenoid,
DC. Operation: Pull.
Load Force: 4.5 oz.
Stroke Length: 0.5.
Duty Cycle: Continuous.
Coil: 24VDC 0.083A 290 Ohms.
Plunger Config: Tubular.
Mech: 0.313" Threaded Bushing.
Body Diameter: 0.45"H x 1.67" w/ Plunger.
Weight: 0.5 oz.
Connection: 6" Wire leads.
Learn More