Solenoid

WHITE ROGERS - 25K49A-3 - Gas Solenoid Valve & Regulator, Gas.

Status: Discontinued

115VAC 0.12 Amp 60Hz.

Filter Cap. 1 C.F.H.

Max pressure 1/2LB.

Dimensions: 1.97" W x 5.31" L

Inlet: 3/8 - 18 N.P .T.

Outlet: 3/8 - 18 N.P .T.

Note: White Rogers is now Emerson

New Old Stock - Soiled but Never Used - Rare - Over 70 Sold.

Made in USA.

PSP MFG - 5945-502-4495 SD-845 Solenoid, DC.

Operation: Pull.

Load force: >48 oz.

Stroke length: 0.75.

Duty cycle: Continuous.

Coil: 24VDC 0.58A 41 Ohms.

Plunger config: Round with 3/8" loop.

Mech: Rectangular flange.

Body dim: 1.5"D x 4". Weight: 1.1 lbs.

Connection: MS3102A-125-3P Conn. Formerly:3380-708550-9985.

GUARDIAN ELECTRIC - A420-064181-00 - Solenoid, DC.

Operation: Pull.

Load Force: >16 oz.

Stroke Length: 0.5.

Duty Cycle: Continuous.

Coil: 24VDC 0.3A

Coil Resistance: 77 Ohms.

Plunger Config: Round w/ Slot & Hole.

Mech: Two 6-32 holes in base.

Body Dimensions: 1.4 "x 0.85" x 2.75".

Double Marked: 11-7-156034

Weight: 0.2 lbs.

Connection: Polarized coil w/int.diode, narrow pin (+).

Note: Large Discount for Manufacturer's Vacuum Package of 20 Pieces

Made in USA

ASCO - Automatic Switch Co - Model - HV1744762 - Red Hat Solenoid.

Small 3-way solenoid operated valve with all three pipe connections located in the body. NEMA Type I Solenoid Enclosure. Valves are equipped with a NEMA Type 4 Watertight Enclosure. 

Commercial - General Purpose

Body Design: 3 Way Solenoid Valve

Coil Voltage: 120VAC/60Hz, 110VAC/50Hz

Coil Type: B94, P/N: MP-C-011, 099216-005D, 2 Wire.

Wattage: 10.7 W

Solenoid Enclosure: Watertight

Pressure: 15 PSI Air, Inert Gas & Water.

Material: Brass Valve

Maximum  Fluid Temperature: 200 F

Approximate Lead Length: 18"

1/4" PIPE Three-Way Operation: Normally Open & Normally Closed.

Uses Rebuild Kit 174889 D-7240 DS-796

Dimensions: 45x37x91mm High Including Coil.

Coil: 35x40mm Int. 120V 60Hz 10.7W Ind.

Boxed with Instructions - New Old Stock.

A 726048003 CSA

Proudly Made in USA

HYDRO AIRE - 335974-11 - 63A-588 - Electric Solenoid

Crane Aerospace

The high quality, precision and dependability of HYDRO Aire products make them ideal for many of the most demanding industries on earth.

Electric Solenoid 63A-588

Steel Body and Plunger

Plunger ID Thread 8-32

Dimensions: 1.5" Diameter x 3" Long Including Connector, Body 2.0" Long

Safety Wired Connector

New Old Stock - Aerospace Solenoid

Made in USA

GUARDIAN - A420-065891-00 Solenoid.

Mechanical solenoids are used to stop, clamp, position, switch, latch, lock, release, hold, and divert motor motion. 

230 VAC

Operation: Pull.

Load force: >32 oz.

Stroke length: 0.5 Inch

Duty cycle: Continuous.

Coil: 230VAC 0.09A 340 Ohms.

Plunger config:Rectangular w/u-brkt.

Mech: 8 holes on base.

Body dim: 2.3"x1.2"x1.5".

Weight: 0.41 lbs.

Connection: 1/4" spades on coil.

Life Expectancy >500,000 Cycles

230V 50HZ SOLENOID NEW DBL MARKED 13-7-160883

DECCO DETROIT COIL COMPANY - 9-115 - Laminated Pull Solenoid

Built for heavy duty applications and long service life

Solenoid, AC.

Operation: Pull.

Load force: >32 oz.

Stroke length: 0.6.

Duty cycle: Continuous.

Coil: 115VAC 2A 61 Ohms.

Plunger config: Rectangular w/hole.

Body dim: 2"x1.2"x2.4".

Weight: 0.58 lbs.

Connection: 8" 16AWG leads w/hook lugs.

This solenoid has a T-shaped laminated design plunger and laminated steel frame. It has the unique ability to hold an exceptionally heavy load with a minium of humming or vibration. To minimize the humming or chattering of most solenoids, the contact surfaces of the laminated frame and plunger are machined to provide a smooth and flush contact surface.

Laminate solenoids consist of a laminated steel frame, a coil, and a movable plunger in the center of the coil. When the coil is energized the plunger is pulled into the coil

E120-87 - Linear Solenoid,

AC. Operation: Pull.

Load force: >48 oz.

Stroke length: 0.75"

Duty cycle: Continuous.

Coil: 115VAC 0.24A 475 Ohms.

Plunger Config: Rectangular w/u-brkt.

Mech: 8 holes on base.

Body dim: 1.2"x1.5"x2.5".

Connection: solder lugs on coil.

Weight: 0.4 lbs.

New Old Stock

MAGNET SCHULTZ OF AMERICA - S-07535 Solenoid,

AC. Operation: Push.

Load force: 9.6 oz at 0.2" Stroke.

Stroke Length: 0.2. Duty cycle: continuous.

Coil: 120VAC 225 Ohms.

Holding Force: 51 Oz

Plunger config: round 0.31"D plunger w/ 0.094"D 1.6"L rod.

Mech: 2 0.11" holes 1" apart.

Body dim: 1.86" x 0.94"W x 1.87"L plus 3" plunger.

Weight: 5 oz.

Connection: 2 x 0.187" terminals.

Genuine Magnet Schultz - New Old Stock

Additional Information: https://magnet-schultzamerica.com/

GUARDIAN - TP4X16-I-24D Cylinrical Solenoid, DC.

Operation: Push.

Load Force: >6 oz. (6/116 N)

Holding Force: 22 Oz

Stroke length: 1.

Duty cycle: Intermittent.

Coil: 24VDC,  0.330 Amp, 72.7 Ohm.

Coil power: 8.3 Watt

Plunger config: round with 0.062" D push pin.

Mech: 3/8-32 thrd col w/brkt.

Body dim: 0.5"D x 2.023" long, overall 3.714" including internal pin. (12.7 X 51 mm) 

Weight: 0.1 lbs.

Connection: with 8", 24 AWG leads.

P/N: A420-066086-00

MAGNET SCHULTZ OF AMERICA - S-09562 - Tubular Solenoid, DC. Push,

24VDC

Continuous Duty Cycle

Coil Resistance:105 ohm

Force: 35 ounce at 0.03 inches.

Dimensions: 1.0" OD x 2.4" long excluding 3.95" long rod.

MAGNET SCHULTZ OF AMERICA MSA - S-06697 Solenoid, DC.

Operation: Pull.

Load force: >48 oz. 

Stroke length: 1.

Duty Cycle: Continuous.

Coil: 110VDC 0.114A 1060 Ohms.

Plunger config: Round w/slot & hole.

Mech: 4 8-32 holes on 2 sides.

Body Diameter: 1.4"x1.6"x4" .

Weight: 0.8 lbs.

Connection: 3/16" male spades.

MAGNET SCHULTZ OF AMERICA - S-0-9564 Solenoid, DC.

Operation: Push.

Load force: 55 oz at 0.03".

Stroke Length: 1.2.

Duty Cycle: Intermittant.

Coil: 24VDC 1.6A 15 Ohms.

Plunger Config: round with 0.1" dia pin.

Mech: 3/4-24 collar w/nut.

Body Diameter: 1"D x 4"L.

Weight: 0.36 lbs.

Connection: 5" 22 ga leads.

MAGNET SCHULTZ OF AMERICA - S-06698 - Solenoid, DC.

Operation: Pull.

Load force: >48 oz.

Stroke length: 1.

Duty Cycle: Intermittant.

Coil: 110VDC 0.3A 330 Ohms.

Plunger Config: Round w/slot & hole.

Mech: 4 8-32 holes on 2 sides.

Body dim: 1.4"x1.6"x4".

Weight: 0.8 lbs.

Connection: 3/16" male spades.