Timers & Counters

VEEDER-ROOT - 727235-006 - Small Stroke Mechanical Revolution Counter 5-Digit, resettable.

Veeder-Root - Danaher Industrial Controls

Series 7272/7287

Status: Discontinued

Combines excellent performance with practically indestructible construction. The counter of choice where only the most durable can survive. Withstands dust, moisture, oil, grease, shock, and vibration. Commonly used on construction equipment, cement mixers, paving equipment, stokers, agricultural machinery, and other applications in extremely hostile environments. 

Small flange mount, mechanical totalizer with large figure size. all external and internal parrts are corrosion resistant for trouble free and accurate performance, indoors and out. Easy to see five figure display, igh contracts white-on-black numerals and stainless steel drive shaft.

Mechanical counter 5-Digit Resettable Totalizer.

Display: High Contrast White-On-Black Numerals

Ratchet/Stroke Operated with knob reset (no knob included, forward to count 45 Degree actuation.

Shaft: Stainless Steel Shaft

Drive: Ratchet

Mount: Base Mount

No Lubrication Required

Grey body is 0.98"deep, 1.2" with mounting flange on bottom x 2.75" long, including counting & reset shafts x 1.3" high, 1.57" with counting shaft as delivered (moveable).

Base 1.44" X 1.18"

Factory New Old Stock in Manufactures Box.

Made in USA

 

Learn More

WEG / MaxiRex - S95020/923701 - Timers.

0-60 minute

120V, 16A/250VAC-SPDT

Single Dial.

MaxiRex - Schaltuhr can be set at increments of 1.25 min.

Learn More

TEK Industries - TEK Commander 810120 - Programmable Digital Event Timer. 120/240 VAC 30 Amp

Tek Commander 810120, Commercial Quality, Digital event timer programmable to the second spread over a repeatable 24 hour cycle. Output relay with normally-open, 30 amp/277 VAC contact. Operation: 120/240 VAC. Bright yellow 4-digit LED display cycles between 24-hour time and set event status with indicators for each. Weather resistant packaging in 4-inch square plastic housing and 4-button membrane programming buttons.

Digital event timer is programmable to the second with weekly cycles.

Great for automatically controller your pool and/or hot tub filter.

Detailed Operating Manual 

Made with Pride In the USA

 

Learn More

Process control. Multifunction timer. Relay: output: DPDT. Input: 24vac. Output: 5Amp 250VAC. Mount: Plug-in 11 octal. 3 Programmable timing functions. 16 Programmable time ranges from 0.1 sec to 500 hrs. NIB, with manufactures specification sheet. Learn More

Process control. Multifunction timer. Input: 24VAC. Output: 5Amp 250VAC. Mount: Plug-in 11 octal. 5 Programmable timing functions. 12 Programmable time ranges from 0.2 sec to 100 hrs. One shot/interval. NIB, with manufactures specification sheet. Learn More

Timer. 60 Second, 0.01 Second increments. Face: 3" D. Motor and clutch: 28VDC. Enclosed. Mount: panel, 4 holes with 3.5" centers. Dimensions: 3.1" square x 4.524" behind panel. Good condition. Learn More

Timer. 60 Second, 0.01 Second increments. Face: 3" D. Motor and clutch: 28VDC. Enclosed. Mount: panel, 4 holes with 3.5" centers. Dimensions: 3.1" square x 4.524" behind panel. Good condition. Learn More

CRAMER - 632E-A20S Meter, Hour.

4 Hour digits plus 1 tenths.

50 Cycle, 120VAC or 115VAC

Elapsed time. 9999.9 Hour.

Non-resettable.

Mount: 2.5" hole.

Body Diameter: 2.203"

Mounting Flange Width: 2.969" 

Body Depth: 2.850"

Mounting Method: Semiflush

Note: Cramer / Giannini Controls Corp.

NSN 6645-01-361-8947

Made in the USA.

New

Learn More

Panasonic - Aromat - Matsushita - LC48P-T6B24-240V Counter.

6 Digit Preset Electronic.

100 Counts/Second.

Input: 24-240V AC/DC.

Load: 100mA max. 30VDC.

Mount: Panel, 44.5mm square, 8 pin octal.

Complete with Manufactures Operating Instructions.

New in Manufacturer's Packaging.

Learn More

REDINGTON - V8-4816 - Counter. 6 Digit, 24VDC.

Electromechanical. 1200 Counts/Min.

Mount: Panel, 4 hole.

22-2C Wire.

Dimensions: 1.63" wide x 1.0" high x 2.25" deep plus mount flange 1.625" wide x 2.36" high x 0.20" thick.

New Old Stock

Learn More

0-999999 Second Tme Totalizer - NEW - panel mount 120v/60 (277.78 hours)Panel Mount - with spex Learn More

Hardware. H Bracket for mechanical counters. Such as 5-H-81 type counter. Note: Durant/Eaton. Learn More

240V 50-or-60HZ RESET TIMER 0-60 Seconds MINIMUM SETTING - 3% OF FULL SCALE - FM(FACTORY MUTAL) APPROVED - SYNCHRONOUS MOTOR DRIVEN 10Amp Contacts - 9 POSITION TERMINAL BLOCK Learn More

8 Digit Resetable Counter.One input for voltage counting level of 48-240vac and or one input for 5 to 50 V AC/DC. Counting speed is 40 Hz max. For sinking or sourcing use 5-50vdc.Unit has one lithium battery inside which says should last up to 8 years. Learn More

Counter. 120VAC 6-Digit electric, with front panel pushbutton reset. Up to 1,000 counts / minute. Count coil may be "left on indefinitely without damage." Avoid connecting AC (rectified) counters in parallel with highly inductive relays, solenoids, motors, etc or use surge protection. 3.5W UL CSA. Front panel cutout: 2.10"W x 1.13"H. P/N: 41322406. 4 oz. New in box. Learn More