Valve

ASCO - Automatic Switch Co - Model - HV1744762 - Red Hat Solenoid.

Small 3-way solenoid operated valve with all three pipe connections located in the body. NEMA Type I Solenoid Enclosure. Valves are equipped with a NEMA Type 4 Watertight Enclosure. 

Commercial - General Purpose

Body Design: 3 Way Solenoid Valve

Coil Voltage: 120VAC/60Hz, 110VAC/50Hz

Coil Type: B94, P/N: MP-C-011, 099216-005D, 2 Wire.

Wattage: 10.7 W

Solenoid Enclosure: Watertight

Pressure: 15 PSI Air, Inert Gas & Water.

Material: Brass Valve

Maximum  Fluid Temperature: 200 F

Approximate Lead Length: 18"

1/4" PIPE Three-Way Operation: Normally Open & Normally Closed.

Uses Rebuild Kit 174889 D-7240 DS-796

Dimensions: 45x37x91mm High Including Coil.

Coil: 35x40mm Int. 120V 60Hz 10.7W Ind.

Boxed with Instructions - New Old Stock.

A 726048003 CSA

Proudly Made in USA

Norgren Fluidics  - 4LD-010-D00+ - 4LD-010 - Check Valve, Miniature.

A check valve is the simplest type of directional control valve used in hydraulic systems. Check valves stop the flow of fluid in one direction and allow free flow in the opposite direction. They are also known as non-return valves. Check valves may be used as prefill valves, bypass valves, pre-tensioning or protection of hydraulic components against pressure surges.

Extremely low crack pressures 10-32 UNF or barbed tube connections Direct in-line mounting Control flow direction in medical equipment, instrumentation systems, and in miniature pneumatic control systems.

Duckbill type check - Non-venting

Material: Body - Aluminum, Duckbill - Epichlorohydrin

Crack Pressure: 8" H2O (Pressure required to produce .001 scfm (28.3 cc/m) forward air flow)

This check valves has a 200 x 200 mesh, stainless steel inlet filter screen to protect the duckbill.

Furnished with two adapters for use with 1/16" ID flexible tubing.

Connection: 10-32 UNF.

Tube Connection.

Genuine Norgren Fluics - New Old Stock

Proudly Made in USA