Process Control

GEMCO - 404S21121YAA1 - Stock One Switch, Rotary.

Commercial Industrial Quality Switch

Contacts: 1P2T.

Maximum Voltage: 300

Actuator: Momentary.

Mechanical: Panel, 4 Contacts.

Mounts in a 0.85" hole, complete with 4 metal washers, one cork and one locating pin.

Note: Selector switch with adjustable cam.

Each Switch consists of End Plate, Cover, One Contact Block, Deten Mechanism, Operator, and Switch Body.

Genuine Vintage GEMCO - New Old Stock

In Manufactures Original Packaging with Instruction Sheet.

Alternate: GE 404S21121YAA1, 625896-18

Proudly Made in USA

GEMCO - 404S32121YAA33 - Stock One Switch, Rotary.

Commercial Industrial Quality Switch

Contacts: 2P3T.

Maximum Voltage: 300

Actuator: Momentary to Right and Left.

Mechanical: 2 Panels, 8 Contacts Sets.

Mounts in a 0.85" hole, complete with 4 metal washers, one cork and one locating pin.

Note: Selector switch with adjustable cam.

Each Switch consists of End Plate, Cover, Two Contact Blocks, Deten Mechanism, Operator, and Switch Body.

Genuine Vintage GEMCO - New Old Stock

In Manufactures Original Packaging with Instruction Sheet.

Alternate: GE 404S32121YAA33

Proudly Made in USA

GEMCO - 404S34121YAA3A11 - Stock One Switch, Rotary.

Commercial Industrial Quality Switch

Contacts: 2P3T.

Maximum Voltage: 300

Actuator: Momentary to Right side and Contiuous to Left.

Mechanical: 2 Panels, 6 Contacts Sets.

Mounts in a 0.85" hole, complete with 4 metal washers, one cork and one locating pin.

Note: Selector switch with adjustable cam.

Each Switch consists of End Plate, Cover, Two Contact Blocks, Deten Mechanism, Operator, and Switch Body.

Genuine Vintage GEMCO - New Old Stock

In Manufactures Original Packaging with Instruction Sheet.

Alternate: GE 404S34121YAA3A11, 626662-01

Proudly Made in USA

TURCK - FKFD12-0.8 - M12 Eurofast Receptacle Female Connector Rear Mount Cordset 12-pin Panel Mount Socket

The FKFD 12-0.8 is a 0.8m Sensor Cable with 12-position receptacle to free end connection. This sensor cable comes with a nitrile O-ring, gold-plated brass contacts, housing and locknut.

M Series Connector, U-01841 | TURCK FKFD 12-0.8

60VAC/75VDC-2Amp EuroFast Rear Mount with Leads

Female Receptacle Panel Mount (Bagged w/Nut )

12-conductor wired with #24AWG 0.8meters long,

Contacts: 12 Gold Plated, Brass

Mates with 12-pin Cordsets

Connector Size: M12 x 1.00

Current Rating: 2A

IP Rating: IP68

Lenngth: 0.8 m

Temperature: -40 C to 105 C

Approvals: UL,CSA

Factory New

Electroswitch OAK-GRIGSBY INC. - 94Q100-40-00 - Rotary Encoder.

The 900 Series offers a full line of low cost, rugged optical encoders with incremental output. Well suited for industrial motion and position sensing, their low profile and high resolution also make them ideal for panel mounted applications. A two-channel quadrature code allows the encoder to detect the direction and magnitude of the input motion applied to its shaft.

Optical. 100PPR, 3,000RPM max.

Two Channel Quadrature Output.

Style 2 Output: NC + A B.

Mount: Panel, 1/2" bushing and 1/4" SS shaft, ball bearing type, spins freely.

Package: Die Cast Housing, 1" Square.

Standard 4" 4-pin Ribbon Cable and Connector.

Note: Compact, Robust, Economical. 100 million+ operations.

GEMCO - 404S32121YAA3 - Stock One Switch, Rotary.

Commercial Industrial Quality Switch

Contacts: 1P3T.

Maximum Voltage: 300

Actuator: Momentary each side.

Mechanical: Panel, 4 contacts.

Mounts in a 0.85" hole, complete with 4 metal washers, one cork and one locating pin.

Note: Selector switch with adjustable cam.

Each Switch consists of End Plate, Cover, One Contact Block, Deten Mechanism, Operator, and Switch Body.

Genine Vintage GEMCO - New Old Stock

In Manufactures Original Packaging with Instruction Sheet.

Alternate: GE 404S32121YAA3, 625896-18

Proudly Made in USA

Square D Schneider Electric - 9001TS6 - Switch, Rotary.

Engineered to resist the ingress of solid foreign objects, water, corrosion, ice, oil, and non-corrosive coolants in indoor and outdoor environments.

Status: Discontinued

Selector Switch Operator, 3 Position, Maintained

30mm.

Heavy Duty 3-Position

Black Knob

Type T

Series A.

Foundry 3 Position Cam F Black Manual Return.

New Old Stock

Alternate: 84703, 9001KS73B

Proudly Made in USA

DECCO DETROIT COIL COMPANY - 9-115 - Laminated Pull Solenoid

Built for heavy duty applications and long service life

Solenoid, AC.

Operation: Pull.

Load force: >32 oz.

Stroke length: 0.6.

Duty cycle: Continuous.

Coil: 115VAC 2A 61 Ohms.

Plunger config: Rectangular w/hole.

Body dim: 2"x1.2"x2.4".

Weight: 0.58 lbs.

Connection: 8" 16AWG leads w/hook lugs.

BIMBA Flat 1 - FS-090.125-1 - Pneumatic Cylinder 

Bimba Double Acting, single End Rod

Bore: 1-1/16"

Stroke: 0.125"

Mount Type: Basic

Bumper Type: None

Rod Thread: Standard Female

Temperature Option: Standard

Hollow Rod: NO

Rod Wiper: NO

Excellent Slightly Used Condition

Volvo - 86K5843, Fits Volvo and others

ENGINE BLOCK HEATER - CSA LR-1843 Series-A 1500W 120-VAC 4.8"LOA

OAK INDUSTRIES - WU048D2-283 - 48VDC 2 N.O. 2 N. C. Industrial Relay

Coil: 48VDC

Coil Resistance: 975-OHM 

Connections: 10 Lug Spade Socket or Quick Disconnects

Load Current: 25Amps 240VAC Resistance

1HP 120VAC, 2HP 240VAC 50/60 Hz

Hermetically Sealed Can with Grounding Stud and Mounting Plate

Genuine Vintage Oak Industries - New old Stock

Proudly Made in USA - CSA

HAYDON - AP35-500C - Motor, AC Timing

A Synchronous electric motor is an AC electric motor in which, at steady state, the rotation of the shaft is synchronized with the frequency of the supply current; the rotation period is exactly equal to an integral number of AC cycles.

Product description: 120 VAC Cam Synchronous Motor Drive. Latching microswitch with a rating of 22 Amp 125-250VAC. Adjuststable Cam Time from 1 Second to 14 Seconds. Synchronous Motor is a Hayden 120 VAC 4 RPM with 2-way clutch unit. Unit also contains a 120 VAC DPDT Relay 5 Amp Contacts. 

1 - 13.8 seconds.

Supply Voltage: 120VAC 60Hz 5W.

Haydon Synchronous Motor Speed: 4RPM, 5W E15450 A2396A4.

Mechanical Mount: Panel Mount Frame on 2.8" Centers.

Unit is Complete with Relay, Motor, and SPDT 15Amp Microswitch

Connections: Octal 8 Pin Socket.

UL CSA Approved

Proudly Made in USA

New Old Stock

GUARDIAN - TP4X16-I-24D Cylinrical Solenoid, DC.

Operation: Push.

Load Force: >6 oz. (6/116 N)

Holding Force: 22 Oz

Stroke length: 1.

Duty cycle: Intermittent.

Coil: 24VDC,  0.330 Amp, 72.7 Ohm.

Coil power: 8.3 Watt

Plunger config: round with 0.062" D push pin.

Mech: 3/8-32 thrd col w/brkt.

Body dim: 0.5"D x 2.023" long, overall 3.714" including internal pin. (12.7 X 51 mm) 

Weight: 0.1 lbs.

Connection: with 8", 24 AWG leads.

P/N: A420-066086-00

WEHO - S-400-24 - Power Supply, DC, Switching. 400 Watt, 24 VDC, 17 Amp

Connect this unit to 110 or 220 Volts AC household power, and it will supply 400 Watts at 24 Volts DC and 17 Amps.

This power supply has been engineered specifically for use with DC motors. Most power supplies designed for use with LED lighting or other electronics will simply shut down when exposed to the high current demands of motors. Built-in current limiting protects the unit from overloads and short circuits. The current limiting feature enables these power supplies to keep functioning through the high-current start-up surges from motors. AmpFlow power supplies will just limit the current to the rated maximum even when a larger load is called for, (like when a DC motor starts up). Also, inductive loads (like motors) can cause damage to power supplies that are not designed for them.

These power supplies also work well in any application where AC line voltage needs to be converted to DC voltage. Other uses include LED lighting, HAM radio, battery charging, and replacing plug-in AC adapters when more power is required.

Short-circuit and overload protections help these units survive harsh operating conditions. The power supply shuts down temporarily if the temperature, current, or voltage goes beyond the safe operating range, and it starts up again automatically when the condition goes away – no rebooting is necessary.

This high-efficiency power supply has an output voltage that is adjustable by plus or minus 10%. It includes an EMI filter to minimize interference with radio signals and a soft-start circuit that reduces the AC inrush current peaks. Every power supply goes through a full-load burn-in test, so no defective unit leaves the factory.

DC output voltage: 24V

DC output current: 17A

DC output voltage error: ±1%

Ripple & noise: 150mV

Efficiency: 86%

AC input voltage range: 85-132VAC/170-264vac 47-63HZ 

Input current: 6.5A/115V 4A/230V

AC inrush current: Soft-Start Current 25A/115V 50A/230V

Leakage current: 3.5mA/240VAC

DC adjustable range: ±10% rated output voltage

Over load protection: 105-135% cut off the output auto -recovery

Over-voltage protection: 115-135 cut off the output auto -recovery

Setup rise hold up time: 200ms 50ms 20ms

Withstand voltage: I/P-O/P:1.5KVAC 1minute, I/P-FG:1.5KVAC 1minute, O/P-O/P:0.5KVAC 1minute

Withstand temperature: -10°C~+60°C,20%-90% RH

Dimensions: 8.5" X 4.5" X 2.0"

Weight: 1.05kg (2 Pounds)

This unit meets all the following safety and EMC standards: UL 1950, EN60950, EN55022, IEC100-3-2, CE, ROHS

Applications: Motor Controllers, CNC, Industrial Automation, LED Strip Lights, CCTV Power Supply , AC/DC Adapter.

Alternates: AmpFlow S-400-24, Meanwell 2-400-24, Mulview S-400-24, Mingwei S-400-24

Factory New

Japan Servo Motors - KH42HM2-852 - 1.8 Degree 2 Phase Hybrid Stepping Motor

Commerical Quality KH42 Series 800 Type High efficiency, High Torque, Low Vibration and Low Noise Motor.

Much improved quality and performance over the chinese Nema 17 Stepper Motors on Amazon & Ebay! Very nice upgrade for 3D printers at a great price!

This new series 800 type, which maintains the high torque performance of our conventional 500 Type and lower vibration and noise. High efficiency and high torque have been achieved through our intensive research on magnetic circuitry. A unique  tooth profile has been employed through the development of a new  proven theory to achieve low vibration and low noise. 

Specifications 

NEMA 17

Drive Method - Uni-Polar 6 Wire

Bearing Description

Step Angle - 1.8 Degrees/step

Voltage - 24 Volts 

Current - 0.38 Amps/Phase

Winding Resistance - 22.4 Ohms/Phase

Inductance - 21.5 mH/Phase

Holding Torque - 2.0 kgf cm (28 ounce inch)

Detent Torque - 150 gf cm (2.1 ounce inches)

Rotor Inertia - 42 g cm2 (0.23 ounce inches)

Weight -  260 g (0.57 Lbs.) 

Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)

Insulation resistance  500 VDC 100Mohm min.

Dielectric Strength - 500 VAC 50 Hz 1 minute

Operating Temperature Range 0 - 50C

Allowable Temperature Rise 70 degrees

Dimensions 1.65" X 1.65"  X  1.34" (42mm X 42mm X 34 mm Max) 

Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.

NEMA 17

Drive Method - Uni-Polar 6 Wire

Bearing Description

Step Angle - 1.8 Degrees/step

Voltage - 24 Volts 

Current - 0.38 Amps/Phase

Winding resistance - 22.4 Ohms/Phase

Inductance - 21.5 mH/Phase

Holding Torque - 2.0 kgf cm (28 ounce inch)

Detent Torque - 150 gf cm (2.1 ounce inches)

Rotor Inertia - 42 g cm2 (0.23 ounce inches)

Weight -  260 g (0.57 Lbs.) 

Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)

Insulation resistance  500 VDC 100Mohm min.

Dielectric Strength - 500 VAC 50 Hz 1 minute

Operating Temperature Range 0 - 50C

Allowable Temperature Rise 70 degrees

Dimensions 1.65" X 1.65"  X  1.34" (42mm X 42mm X 34 mm Max) 

Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.

ApplicatIons: RobotIcs,  3D Printer,  Arduino,  CNC,  Router.

Norgren Fluidics - 5VS-011 - Low Pressure Drop Indicator.

Provides a visual indication of level of pressure drop across units. Provides indication of condition of filter elements. Domed lens gives wide angle of visibility. Enable pressure drop in various parts of the system to be monitored.

10-32 female unf bottom rotowink pressure indicator

As Removed