I/O Relay Module
- OPTO 22 - G4AD3 - Relay, A/D I/O. Input 4-20mA. Digital output.$89.95Relays, A/D I/O. Signal input 4-20mA. 11-pin plug in module. Factory calibrated.Number of analog inputs: 1. Number of digital outputs: 1. Resolution: 12 bits. Module Input Impedance: 414 Ohms. Over/under current range:3 to 35 mA. Loop supply 28VDC nominal. Accuracy:16 �A Learn More
- GORDOS/CROUZET - IDC5Q - Relay, DC. 4 Channel 10-32 VDC, 5 VDC Logic I/O Module, Plug-in.READY TO SHIP - ONLY 43 LEFT IN STOCK!
GORDOS/CROUZET - IDC5Q - Relay, DC. 4 Channel 10-32 VDC, 5 VDC Logic I/O Module, Plug-in.
The IDC5Q is a 4-channel I/O Module contains the equivalent of four single-channel I/O circuits in a single high-density package. Each Quad Pak module can be divided into two pairs with each pair sharing a common connection. The Quad Pak modules are designed to plug into the Quad Pak high-density I/O mounting racks only and cannot be plugged into single-channel racks. Quad Pak modules are designed to work with a 5 VDC logic voltage only and can be used with Optomux, Pamux and Mistic protocol brain boards and mounting racks, as well as racks using a direct cable connection to a computer. DC input modules are used for sensing ON/OFF DC voltage levels.
Relay, I/O. 4-channel DC Input 10-32 VDC, 5 VDC Logic. Digital Module.
SOLID STATE RELAYS - IDC SERIES
10-32VDC
50MA
5VDC SUPPLY
-30 TO 70 DEGREE C
29MA INPUT
4000VAC ISOLATION
4 CHANNELS
5 PIN
I/O MOUNTING BOARD
Learn More - TELEDYNE - 61A-20B2-9Z - Relay, SSR. Control: 3-8VDC.$74.95Relay, SSR. Control: 3-8VDC (10VDC max) (Input 8Amp max). Load: 20Amp 90-280VAC 400Hz (output 0.1Amp min). Case. Encapsulated module. Dimensions: 2.003" sqaure x 1.224" high. Contacts: screw. Note: solid state. New older stock. Learn More
- EAGLE SIGNAL / DANAHER - NL230L1 - ANALOG IN MOD 1-5V - NEWSpecial Price $98.98 Regular Price $169.50
EAGLE SIGNAL / DANAHER - NL230L1 - Analog Input Module
1-5 VDC for EPTAK 200OLD
Connections: 1 Quick Connect, Socket or Solder
Made in USA - New Old Stock
- OPTO 22 - G4PB32H - I/O relay board.$159.00I/O relay board, mounting rack. G4, with head connect, brain board compatible, 32 channel/B4 brai. Learn More
- Opto 22 - DA4T - Relay, I/O. Isolated output: 0-5V.$89.99Relay, I/O. Isolated output: 0-5V. Mount: PCB or I/O rack. Learn More
- GRAYHILL - 70MRCQ24HL - Relay mounting rack/card.Special Price $148.98 Regular Price $200.00
GRAYHILL - 70MRCQ24HL - Relay Mounting Rack/Card.
Accepts 24 Grayhill or standard I/O modules.
With edge connector and 24 [ 0~23 } module sockets and 48 position terminal boards connections.
Connector Type : Screw
Number of Channels: 24
Number of Positions: 11
Termination: Screw
Dimensions: Thickness 55.9 mm
Compliance: Approvals CSA, UL
New Old Stock
Learn More - Crouzet Corp - PB-24Q-1 - Relay Board. For I/O Relays.Special Price $64.98 Regular Price $85.00
Crouzet Corp - PB-24Q-1 - Relay Board.
Status: Discontinued
For I/O Relays, Quad Socket Board.
Dimensions: 8.00" x 6.00" x 4.00"Learn More - Crouzet Corp - PB-24 - 57-105 Rev W - Relay, Circuit Board. I/O Board, 24 Channel/Position.Special Price $84.98 Regular Price $129.95
Crouzet Corp - PB-24 - Relay, Circuit Board.
The PB24 I/O mounting rack can accommodate up to 24 single-channel Opto 22 standard
(Generation 1) I/O modules. The PB24 I/O mounting rack uses a 50-pin card edge connector for interface to computer parallel I/O ports via a 50-conductor ribbon cable.I/O Board Module Rack
24 Position. (24-Channel).
LED Status Indicator for Each Channel
Dimensions: 476.3mm Length, 114.3mm Width, 55.9mm External Depth
50 Pin, 6-32 Screw Terminals
Note: Double marked 57-105 Rev W and CPX-70.
New Old Stock.
Learn More - TELEDYNE - 61A-20B2-11Z - Relay, SSR. Control: 90-280VAC.$74.95Relay, SSR. Control: 90-280VAC. Load: 20Amp 280VAC 400Hz. Case. Incapsulated module. Dimensions: 2.003" sqaure x 1.224" high. Contacts: screw. Note: solid state. New older stock. Learn More
- OPTO 22 - G4PB24 - Relay, I/O rack.$97.00Relay, I/O rack. For Use With:G4 I/O modules, PCB Type:24 Channel I/O Rack. Dimensions: 7.5 x 6.25". Thickness: 2.32". Learn More
- OPTO 22 - IDC5Q - Relay, DC. 5VDC Logic.Special Price $48.98 Regular Price $68.50READY TO SHIP - ONLY 14 LEFT IN STOCK!
OPTO 22 - IDC5Q Relay.
I/O. 4-channel
12-32 VAC, DC Input 10-32 VDC
5 VDC Logic
Operating Temperature: -30 C to 70 C
Mounting Style: PC Board
Digital Module.
Applications: Limit Switches, Photoelectric Switches, Prooxmity Switches, Push Buttons, Selector Switches.
Learn More - OPTO 22 - B4 - 32 Channel DIGITAL BRAIN BOARDSpecial Price $79.95 Regular Price $95.0032 CH DIGITAL BRAIN BOARD - PAMUX Learn More
- GORDOS/CROUZET - M-ODC5MA - 3A 200VDC OUT, 3-8VDC IN SSRSpecial Price $42.98 Regular Price $60.00READY TO SHIP - ONLY 5 LEFT IN STOCK!
GORDOS/CROUZET - M-ODC5MA - M-Series Output Module
Output: 3A 200VDC
Input: 3-8VDC IN SSR
Mounting Type: Through Hole
New Old Stock
Proudly Made in USA
Learn More - CRYDOM - PR-4R - I/O Mounting board.Special Price $84.98 Regular Price $124.95CRYDOM - PB-4 - I/O Module for Standard I/O Modules, 4 Channel Screw Terminals. • Screw terminal barrier block for logic connections • Screw terminal barrier block for load connections • Resident pull-up resistors • 5 amp field-replaceable fuses (LITTELFUSE #251005 or equivalent) • LEDs indicate logic status • All even-numbered logic connections are logic ground • Input and output modules accepted interchangeably • Operate with 5, 15 or 24 volt logic supplies • Captive-screw retaining system for standard-size modulesI/O Mounting board. For standard I/O module relays. Dimensions: 4.5” X 3.5” X 2.2” High (wiith Modules Mounted) More info: http://www.crydom.com/en/products/catalog/p_b4.pdf Learn More
- CRYDOM - PB-4 - I/O Mounting board.Special Price $68.98 Regular Price $84.95I/O Mounting board. For standard I/O module relays. More info: http://www.crydom.com/en/products/catalog/p_b4.pdf Learn More