Relays

CP Clare & Co. - HGJ2MT54211P02 - Relay Mercury Wetted Contacts

Relay, Mercury Hg.

Contacts: DPDT.

Contact Ratings: 100VA.

Coil Voltage: 24VDC.

Coil Resistance: 1400 Ohm.

Mech Mtg: PCB, shielded.

Size: 1.6 x 1.0 x 0.4" high.

Weight: 0.8 oz.

Note: Mercury Wetted. High sensitivity. Singe-sided stable, 1mS response.

Learn More

PULS - CD5.121 - DC/DC Converter, DIN Rail Supply, In 24VDC, Output 12VDC 96W

DIMENSION CD (92 ~ 120W)

Input Type: DC

Number of Outputs: 1

DC Voltage - Input (Min): 18V

DC Voltage - Input (Max): 32.4V

Voltage -  12VDC (Adjustment Range 12 -15V)

Current - Output (Max): 8A

Power (Watts): 96W

Power Reserves: 20% Power Boost 

Ripple and Noise Voltage Max.: 75mVpp

Applications: ITE (Commercial)

Efficiency: 88.2%

Operating Temperature: -25°C ~ 70°C (With Derating)

Size / Dimension: 4.02" L x 1.26" W x 4.88" H (102.0mm x 32.0mm x 124.0mm)

Approval Agency: ABS, ATEX, CSA, DNV GL, EAC, IEC, IECEx, UL

Standard Number: Class I Div 2; 508; 60950-1

Alternate: Digi-Key 1738-1023-ND 

Factory New

Designed in Germany, Assembled in China

In Manufacturer's Packaging with Instructions

Learn More

TE Connectivity TYCO Agastat - 7022SB

Nuclear Qualified Time Delay Relay

DPDT-10A operates on 200-300 VDC 8watts

Coil Voltage 250V

Contact Current Rating: 10 A

Current Rating: 15 A

0.5-5 Sec TIME DELAY ON DROPOUT 

Oversized 2.3" Indicating-Adjustment Knob 

DPDT-Contacts Rated 10A-120/240 VAC 15A-30 VDC

NEW AGASTAT PNEUMATIC TIMING RELAY with vertical or horizontal mounting bracket.

Number of Pins : 8 

Dimensions 2.5" x 2.8" x 4.5" high (114.8x82.6x78.5mm)

Weight: 2.3-pounds (113.398 g)

In manufactures sealed package with mounting hardware, specifications sheet and instructions.

Approvals: CE, CSA, UL

Alternate: 1-1423171-3

Learn More

TYCO TE Connectivity Potter and Brumfield - PM-17AY-208V

Now Manufactured by Strughter Dunn to original Potter & Brumfield Specifications

4PDT-25Amp NEW 208VAC-coil

Contact Material: Silver Alloy

Contact Rating: 35 A

Contact Rating: 120 / 240VAC Resistive  35 A

Contact Rating:  28VDC Resistive 20 A

Motor: 240VAC 1 Phase , 1.5 hp

Contact Resistance, Initial: 100 milliohms max at 6VDC

Nominal Coil Power AC: 14 VA

Nominal Coil Power DC: 4.4 W

Input Voltage Tolerance – AC: 85% to 110% of nominal

Input Voltage Tolerance – DC: 80% to 110% of nominal

Drop-out voltage; 10% of nominal

Duty Sycle: Continuous

Timing Operate Time (max): 40 ms

Release Time (max): 30 ms

Dielectric Strength: Across Open, Contacts : 1500 Vrms

Between Mutually Insulated Point: 2000 Vrms

Insulation Resistance: 1000 megohms at 500VAC

Temperature Operating : -34 to 74 ºC (-30 to 165 ºF)

Electrical (full load): 100,000

Mechanical (no load): 2,000,000

Mounting Position: Any

Weight: 14.9 oz (379 g)

Ratings: 1HP, 25AMP,  1 Phase, 240 VAC

Open Frame 14-screw terminals

 

Learn More

TELEDYNE - M39016/7-023L - New Military Relays

Contact Material: Gold, Metal

Mount: Through Hole

Coil Current: 13.25 mA

Coil Resistance: 2 kΩ

Coil Voltage (DC): 26.5 V

Operating Temperature: -65 °C - 125 °C

Max Voltage Rating (AC): 115 V

Max Voltage Rating (DC): 28 V

Throw Configuration: SPDT

TO-5 Long Gold Leads

Double Marked J411-26WL

NSN 5945-01-116-7871

Learn More

Olymic Controls - Data Switch Corp - T-BAR 901-24C-48 - 48VDC 24PDT Relay 

900 Series - Dust Tight Relay Series

Panel Mount

67-Ohm Coil.

Enclosed Gold-Palladium Precious Metal Contacts

Factory New

Made in USA

Learn More

Olymic Controls - Data Switch Corp - T-Bar - 901-48C-28-S - Relay, control. 48PDT 28VDC.

900 Series - Dust Tight Relay Series

Input: DC.

Contacts: 48PDT.

Coil Voltage: 28VDC.

Coil Resistance: 120 Ohm.

Panel Mount

Size: 1.765" long (plus connections), x 1.030" wide x 3.657" high.

Note: Gold/Palladium precious-metal contacts.

Made in USA

Removed From Equipment

Learn More

Schneider Electric - Square D - 750-D150-G1 - ETO123R Relay, Overload.

Dashpot Magnetic Current Relay, Manual Rreset.

Form HR 1

Class-9055, type-ETO123R form-HRY-35. Type 'E' overload relay, dashpot, heavy current.

"Remove dashpot from relay, leaving plunger and piston assembly in dashpot.

Fill 2/3 full with class 9055, Type R11 dashpot oil, to insure proper operation use. Only this special silicon oil." (not included) About 6 x 4 x 6"high.

New Old Stock

Learn More

Relays, DC. Latching DPDT-2Amp, two 1200 Ohm 24-28VDC Coils. Dimensions: 0.8" x 0.4" x 1.08" with 10 pins, crystal can. Made in the USA. Learn More

SIEMENS - 3TH4244-0BB4 - Contactor Relay, 24VDC 8P 16Amp Control Relay 4-N.O. 4-N.C.16 Amps each,

Auxiliary contacts: 4NC / 4 NO Protection rating: IP20 Termination type: Screw Terminal

Max Operating Temperature: 55 °C

Min Operating Temperature: -25 °C

Operating Supply Voltage: 24 V

Dimensions: Height 78 mm, Length 130 mm, Width 45 mm

Marked used but we believe actually New Old Stock from storeroom.

Learn More

TE Connectivity Potter & Brumfield - KCP-11-5000 -  4-1393100-0 Relay, Plate.

Status: Discontinued

Contacts: DPDT.

Contact Ratings: 2Amp.

Coil Voltage: 36VDC.

Coil Current: 7.2mA.

Coil Resistance: 5K Ohm.

Connections: 8 Octal Plug-In.

Mech Mtg: Panel.

Packaging: Plastic Enclosed.

Note: Type 216 Plate Relay.

Made in USA

Learn More

TE Connectivity Potter & Brumfield AMF - JM2-106-21 Relay, Mercury.

Hermetically Sealed

Coil: 130/140 Ohm.

Electrical Configuration: DPDT-5A.

Contacts utilize standard bridging form D Make-before-Break.

Operating temperature range: -38C to +105degC.

Body: 1.5 x 4".

Connection: 8 pin octal.

UPC: 0780333840695

Proudly Made in USA

Alternate: Clare HG2A-1042-2A1 

Learn More

OMRON - G3PA-210B-VD DC5-24 - SSR DIN-Rail mount TRIAC Power Output Device Cartridge for G3PA-210B-VD DC5-24.

Input 5-24VDC with heat sink

Switches 200VAC 10Amps

2 screws or DIN rail mounting

RED power on LED and marked Temp Sensor.

Approvals: UL CSA VDE CE 

Learn More

Relays, A/D I/O. Signal input 4-20mA. 11-pin plug in module. Factory calibrated.Number of analog inputs: 1. Number of digital outputs: 1. Resolution: 12 bits. Module Input Impedance: 414 Ohms. Over/under current range:3 to 35 mA. Loop supply 28VDC nominal. Accuracy:16 �A Learn More

Relay, control. Input: DC. Contacts: 2 (NC) 1 (NO) 1 (SPST). Contact Ratings: 10Amp. Coil Voltage: 125VDC. Coil Current: 20 mA (latch) /15mA (reset). Coil Resistance: 6250 Ohms (latch) /8400 Ohms (reset). Pickup/Dropout: Maximum pick-up 100VDC. Connections: 12 Pin base Plug-In. Packaging: Enclosed. Note: B255 Series, 219 style, 2 Coil latching. Factory new, each NIB. Made in the USA. Coil marked 45570-43C. Learn More

GENERAL ELECTRIC - 12PJC14F5 - Instantaneous Current Relay

4-Pole (2NC & 2NO)= DPDT - HAND RESET - "Relay Calibration: 10/16/25/40" Window on top of the Black Bakelite case 5"L x 2.4"W x 4" above the Control Panel it mounts to with the (12) 1.5" long screws. Operating Coil:25 AMP:DC 25/60 CY. Fully enclosed. #3 packed.

Current Rating: .6 Amp

Maximum Amperage: 60 A

Type: PJC

Current Type: DC

Applications: Commercial, Control Equipment Panels 

Learn More

Crouzet Corp - TLR2U220A - 220VAC Multi-Function Single ShotTimer.

Status: Discontinued

4-Function: Delay-On-Break.

Delay-On-Make.

Interval.

One-Shot.

0.1 Second to 10 Hours.

Initiate Switch or 24V control.

DPDT-10Amp Output.

0-10 Dial plus switches.

11-Pin Octal-type plug-In.

New in box.

220VAC-Operating voltage.

New Old Stock

Learn More

TE Connectivity CII - M5757/10-043 - 2-1617019-1 - Relay, Control.

Signal Relay with Low current rating

Input: DC.

Contacts: DPDT.

Contact Ratings: 2Amp.

Coil Voltage: 26.5VDC (2amp 28VDC).

Coil Resistance: 675 Ohm.

Connections: Solder Hook.

Mech Mtg: PCB or Panel.

Packaging: Hermetically Sealed.

Size: 0.799" long x 0.399" wide x 0.875" high.

Mount flange overall 1.144" long.

Mil-Spec: M5757/10-043

Note: Comm Instruments - Double marked FW1106G06.

Learn More

C.P. Clare & Co - HGS1033 - SPDT - Two Coil Windings - High Speed

HGS1033-S3 in the C. P. Clare & Company catalogue from way back when - Mercury Wetted Relay.

Dual Wound Single Side Stable Unshielded

Connection: 8 Pin Octal Base

Made in USA

Removed from Equipment

Alternate: P & B JML 142082, ADLAKE MWSL-16461-3B

Learn More

C.P. Clare & Co - HG4A1011 - 4PDT 24VDC

390-Ohm Coil

Mercury Wetted-Contact Relay

14 Pin Round Plug-in Base

Hermetically Sealed

Overall Length: 3.930 inches nominal

Mounting Facility Type and Quantity: 3 threaded stud single mounting facility

Duty Type: Continuous

New Old Stock

NSN 5945-00-983-8895

Note: Retail over $1200

Learn More

Switch, stepping. Type 44 Switch, 3-deck, 11-position, 1-deck, 10 position, non-shorting wipers, 2 of the 4 decks gold-plated; SPDT interupter contact, 120 ohm coil; will operate switch at 36VDC but rated for 48VDC. In Original Styrofoam box. Learn More

14-pin Solder-hooks thru glass = Hermetically-sealed 4-threaded stud mount 1.5"Square x 2.75"High 300-ohm coil 7OZ Learn More

TE Connectivity Potter & Brumfield - HCM11D-24V, 24 VDC 800 Ohm 

Status: Discontinued

Environmental Protection: Dustproof

Winding DC Resistance Rating: 7.5 kilohms maximum single winding

Duty Type: Continuous, Terminal Type and Quantity: 8 pin all functions

Mounting Facility Type and Quantity: 1 plug-in terminal single mounting facility

Nonpile-up Main Contact Arrangement: 2 pole, double throw, one position momentary

Time Delay: 0.003 seconds maximum fixed release time

Time Delay: 0.0035 seconds maximum fixed operate time

Operating Voltage Rating and Type at Specified Temp: 24.0 volts dc 25 deg C single winding

Main Contact Load Current at Max. Rated Voltage: 300.0 mA AC resistive load and 2.0 amperes dc resistive load

Main Contact Maximum Voltage Rating in Volts: 120.0 AC and 28.0 DC

Dimensions: Overall Length - 0.810” Max, Overall Height - 0.410” Max, Overall Width: 0.620” Max.

Made in USA

NSN: 5945-00-158-5359

Alternates: SM-C-739489, 2387069-1, 00-158-5359

Learn More

TE Connectivity AGASTAT - 7012AF - 5-1423157-9 - Time Delay & Timing Relay.

On Delay Model 7012 (Delay on Pickup)

Mount: Panel

Number of Pins: 8

Coil Voltage (AC): 110 V

Contact Current Rating: 10 A

Current Rating: 15 A

Insulation Resistance: 500 MΩ

Max Current Rating: 10 A

Operating Temperature: -30 °C to 75 °C

Max Voltage Rating (AC): 240 V

Nominal Input Voltage (AC): 120 V

Relay Type: Integrated, Relay

Termination: Screw Terminal Block

Throw Configuration: DPDT

Voltage Rating (AC): 20 V

Dimensions: Depth 71.9328 mm, Height 71.9 mm, Length 114.8 mm, Width 65.3 mm

Compliance: Approvals CE, CSA, UL

1-10 MIN. Relay DPDT 120 VAC @ 60 Hz Electropneumatic Timing Relay; -30 to degC. 

Alternate P/N: 5-1423157-9

New Old Stock

Learn More