Rotary Encoder

RESOLVER IN HEAVY DUTY MOUNT RATIO 6/1 SHAFT: 3/4" KEYED

Learn More

Encoder, rotary. Incremental 100-PPR. Bidirectional. Power requirements: current sink, TTL, TTL liner driver: 5 - 26VDC at 80mA max. plus load: CMOS line driver: 5 to 15VDC at 80mA max plus load. Output current: open collector: 40mA sink at 0.5V; line driver: 40mA source/sink. Environmentally sealed enclosure. Shaft: 3/8" single ended. 8830 TTL line driver. MS3102E-16S-1P, 7 pin male connector. Note: Qube. Complete with manufactures wiring instructions and guidelines.

Learn More

Optical Encoder Input-2000PPR Range:400,0006-1/8 " high x 5-1/4" dia. With one 32-Pin (M) panel mt military circular connector 3/8" dia shaft 1-1/8" long (Keyed) RFE-USED Make Us An Offer!!!! Learn More

BRUSHLESS AMPLIFIER by ELECTRO-CRAFT 5'x3"X2.3"ADJUSTABLE LOOP GAIN, CURRENT LIMIT VCS GAIN AND TEST/OFFSET.+/- 10V 5mA OUTPUT +5V@30mA OUTPUT Learn More

Optical Incremental Encoder. Series A. 5VDC 500 CPT. With attached Cannon 10 Pin male circular connector MS3102E18-1P. Complete with manufactures instruction manual. Made in the USA. Learn More

Optical Incremental Encoder. Diemsnsions: 64mm with a shaft 9.5mm. Has a 10 Pin MS3102E18-1P male connector. Mount: 3 hole, 42mm apart. Overall: 91mm tall including shaft. Learn More

Encoder. Marked: Resocoder. Mount: Panel, mount plate 2.654" square with 4 holes at 2.85" centers. Dimensions: body 2.5" D x 3.42" long, plus shaft, mount flange and connector. Shaft: 0.38" D x 0.846" long. Has one 10 Position male circular connector, part number MS3102E18-1P. Used/Removed from equipment. Overall length of unit is 5.75". Note: No other information available. Learn More

Shaft Angle Encoder 4.7mm round shaft ~ 27mm diameter, has long cable with MS connector. Learn More

Encoder, rotary. Incremental 600-PPR. Unidirectional. Power requirements: current sink: 5 - 26VDC at 100mA max. plus load: line driver: 5 to 15VDC at 200mA max plus load. Output current: open collector: 40mA sink at 0.5V; line driver: 40mA source/sink. Environmentally sealed enclosure. Shaft: 3/8" single ended. 7406 Open collector with 2.2k pull-up. MS3102E-14S-6P, 6 pin male connector. Note: Qube. Complete with manufactures wiring instructions and guidelines.

Learn More

Encoder, rotary. Incremental 1000-PPR. Input: TTL (+5VDC): 135mA max. CMOS (+12 or +15VDC): 100mA max. Rugged all metal housing. Mount: Servo face, 1/8" stainless steel shaft. 5V STD. Dimensions: 1.1" OD x 1.2" high. 4 Wire plus braid shield. Minature. Complete with manufactures wiring instructions and guidelines. Learn More

Encoder, rotary. Bidirectional. 10 Pulse/Rev, 5-26V. Mount: 4 holes = 6/32 UNC-2B threads x 0.187 deep, with 50mm centers. Dimensions: approximately 57mm square x 57mm high. Shaft: 3/8" single ended. 5 Pin male MS connector. Complete with manufactures wiring instructions and guidelines. Qube. Learn More

Rotary shaft encoder. Includes report of acceptance tests, For S/N 74586. Dimensions: 27mm D x 67mm plus 8.8mm long 3.3mm shaft with 34 teflon leads 37" long. No other data available. S/N 74590. New. Learn More

240 PPR - Unidirectional with analogue output linear proportional to speed of rotation. 1V / 100 laps - 1V / 1000-RPM - New mating Connector included - 11-25V 30mA 5,000-RPMmax Fmax=50kHz, for output with hysteresis, X4 signal is a sequence of rectangular pulses. Open Collector Output. Custody: Anodized aluminum face plate, plastic housing. Moment of inertia: 50gr cm - Angular accelerattion: 2000 rad/sec2. Learn More