Magnets

Filter  
  1. Price $2.00 - $4.00 Remove This Item
Clear All
Manufacturer  
Unit of Measure  
Price  
View as List Grid

7 Items

per page
Set Descending Direction
  1. ALNiCo - 71C825 - 122293M - Magnets, Neodymium - Super Strong Commercial Rare Earth Magnet.
    ALNiCo - 71C825 - 122293M - Magnets, Neodymium - Super Strong Commercial Rare Earth Magnet.
    Special Price $2.49 Regular Price $3.00 As low as $1.98
    IN STOCK - MORE THAN 100 READY TO SHIP!

    ALNiCo - 71C825 - 122293M - Magnets, Neodymium - Super Strong Commercial Rare Earth Magnet.

    Rare earth magnets are very strong magnets made from alloys of rare earth elements. They are the strongest among the permanent magnets made. These magnets can be manufactured through sintering, compression bonding, injection molding, and extrusion. Neodymium magnets have the highest energy product of any material, and this type of magnet is known for its ability to be created in a wide range of available shapes, sizes, and grades. 

    Dimensions: 0.856" (21.7mm) at the widest area x 0.654" (16.6mm) tall x 0.143" 93.6mm) thick.

    Applications: Magnetic Separators, Wind Turbines, Linear actuators, Microphone assemblies, Servo motors, Tape recorders, Alternators, Pacemakers, DC motors, Flow meters, Holding Assemblies, Lifting Magnets, Magnetic Fanners.

    Extreme caution must be taken when working with rare earth magnets. Magnets larger than a few centimeters are strong enough to cause injuries to body parts pinched between two magnets, or a magnet and a metal surface, even causing broken bones. Magnets allowed to get too close to each other can strike one another with force to chip and shatter the brittle material, and the flying chips can cause injuries.

    Learn More
  2. ALNiCo - NEO20 - Magnets, Neodymium, Super Strong Commercial Rare Earth Magnet. So=Flat surface (No/Curve).
    ALNiCo - NEO20 - Magnets, Neodymium, Super Strong Commercial Rare Earth Magnet. So=Flat surface (No/Curve).
    Special Price $2.98 Regular Price $4.50 As low as $2.49

    ALNiCo - NEO20 - Magnets, Neodymium. Super Strong Commercial Rare Earth MagnetSouth=Flat surface (North/Curve).

    Rare earth magnets are very strong magnets made from alloys of rare earth elements. They are the strongest among the permanent magnets made. These magnets can be manufactured through sintering, compression bonding, injection molding, and extrusion. Neodymium magnets have the highest energy product of any material, and this type of magnet is known for its ability to be created in a wide range of available shapes, sizes, and grades.

    Dimensions: 1' long x 0.42" wide x 0.12" high.

    Flat on one side and has a convex top.

    Applications: Wind Turbines, Linear actuators, Microphone assemblies, Servo motors, Tape recorders, Alternators, Pacemakers, DC motors, Flow meters, Holding Assemblies, Lifting Magnets, Magnetic Fanners.

    Extreme caution must be taken when working with rare earth magnets. Magnets larger than a few centimeters are strong enough to cause injuries to body parts pinched between two magnets, or a magnet and a metal surface, even causing broken bones. Magnets allowed to get too close to each other can strike one another with force to chip and shatter the brittle material, and the flying chips can cause injuries.

    Learn More
  3. ALNICO - 8-948 - Magnets, Neodymium, Super Strong Commercial Rare Earth Magnet.
    ALNICO - 8-948 - Magnets, Neodymium, Super Strong Commercial Rare Earth Magnet.
    Special Price $3.98 Regular Price $4.50 As low as $3.49

    ALNICO - 8-948 - Magnets, Neodymium, Super Strong Commercial Rare Earth Magnet.

    Rare earth magnets are very strong magnets made from alloys of rare earth elements. They are the strongest among the permanent magnets made. These magnets can be manufactured through sintering, compression bonding, injection molding, and extrusion. Neodymium magnets have the highest energy product of any material, and this type of magnet is known for its ability to be created in a wide range of available shapes, sizes, and grades.

    Two on an odd shaped 2.2" "C" shaped steel bracket with two rubber rollers and a steel cover plate.

    Dimensions: Trapeziodial Shaped, 0.25" thick by 0.7" at the top, 0.6" high and approximately 0.54" at the bottom.

    Magnets are epoxied to steel plate and are very strong but brittle. Can be removed with much care or used to lift a few pounds. Keep all Neo magnets Far Away from any magnetic media such as audio or video tapes or floppy discs, etc.

    Applications: Magnetic Separators, Wind Turbines, Linear actuators, Microphone assemblies, Servo motors, Tape recorders, Alternators, Pacemakers, DC motors, Flow meters, Holding Assemblies, Lifting Magnets, Magnetic Fanners.

    Extreme caution must be taken when working with rare earth magnets. Magnets larger than a few centimeters are strong enough to cause injuries to body parts pinched between two magnets, or a magnet and a metal surface, even causing broken bones. Magnets allowed to get too close to each other can strike one another with force to chip and shatter the brittle material, and the flying chips can cause injuries.

    Learn More
  4. Unidentified MFG - MS-298 - MAGNETS
    Unidentified MFG - MS-298 - MAGNETS
    $3.00
    MAGNET strip 3.5"l X 1.0"w X 1/16" thick Learn More
  5. Unidentified MFG - MS-296 - Magnet. Dimensions: 3.5" x 1/2" x 1/16" thick.
    Unidentified MFG - MS-296 - Magnet. Dimensions: 3.5" x 1/2" x 1/16" thick.
    $3.99
    Magnet. Dimensions: 3.5" x 1/2" x 1/16" thick. Mount: easy-to-install adhesive on one side. Package of 25. Learn More
  6. Unidentified MFG - MS-131 - Magnets, business card size. Self-adhesive. Package of 25.
    Unidentified MFG - MS-131 - Magnets, business card size. Self-adhesive. Package of 25.
    $4.00
    Magnets, business card size. Self-adhesive. Note: New, older stock. Package of 25. Learn More
View as List Grid

7 Items

per page
Set Descending Direction
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.