RF
-
- Motorola - MRF325 - Transistor, NPN. 3.4ADC, 82 watts, Case 316-01 Style ! Used.
Motorola - MRF325 - Transistor, NPN.
Designed primarily for wide-band large-signal output amplifier stages in the 100 to 500MHz frequency range. Specified 28 Volt, 400 MHz Characteristics Output Power = 30 Watts Minimum Gain 8.5 dB Efficiency = 54% (Min) BuiltIn Matching Network for Broadband Operation Using Internal Matching Techniques 100% Tested for Load Mismatch at all Phase Angles with 30:1 VSWR Gold Metallization for High Reliability Applications
Max Voltage: 33VCEO, 60VCBO.
Max Current: 3.4Adc.
Dissipation: 82 watt.
Package: Case 316-01, Style 1.
Operating Temperature: -65 to 150 Deg C.
Broadband RF. Silicon. 30W, 225 to 400MHz.
Guaranteed Performance @ 400MHz, 28Vdc /Output Power = 80 watts over225 to 400 MHz Band
Minimum Gain = 7.3 dB@ 400MHzNote: Used/Removed from equipment and may have be soldered.
Learn More - Motorola - MRF137 - Transistor, N-Channel RF. P/N: MRF137.
Motorola - MRF137 - Transistor, N-Channel RF.
Max voltage: 65V.
Dissipation: 30 watt.
Gain: 5 Amp.
Package: SOE flange, test dotted.
Note: N-Channel enhancement mode Mosfet, field effect transistors.
Guaranteed 28V, 150MHz. Power out: 30 watt. Test Dotted
Learn More - Motorola - MWA330 - RF Hybrid Power Amplifier, TO-39 Gold.Special Price $38.98 Regular Price $44.50READY TO SHIP - ONLY 27 LEFT IN STOCK!
Motorola - MWA330, RF Hybrid Power Amplifier, TO-39 Gold.
Status: Discontinued
DC-1000 MHz Wideband Hybrid Amplifier.
50 Ohm Input and Output Impedance.
Package: TO-39 Gold Leads, Can.
Hermetically Sealed.
Genuine 1988 Vintage Motorola - New Old Stock - Superior to Chineses Copies
TECHNICAL DATA:
- Gain, optimal frequency: 6.2 dB @ DC - 1000 MHz
- Noise figure: 9 dB
- Output P1dB: +15.2 dBm
- IP3: +25 dBm
- IP2: +31 dBm
- Power supply: 4V, 60mA
- Group delay: < 0.6 nSGenuine Motorola - New Old Stock
Learn More - Motorola - CA4915 - IC, RF. Linear W29196-ideband-UHF-VHF amplifier.Special Price $109.98 Regular Price $129.95
Motorola - CA4915 - IC, RF.
Linear Wideband-UHF-VHF Amplifier.
Upper 3dB Frequency (Hz)=1.2G
Lower 3dB Frequency (Hz)=10M
Volt Gain Min=16
Noise Figure Max. (dB)=9.0
Nom. Supp (V)=15.
Package: RFMOD flange module 9 pin, Gold Leads.
New Old Stock - Rare
Learn More - Motorola - CA4422 - IC. CATV return amplifier.Special Price $26.98 Regular Price $38.95
Motorola - MHW1224 - CA4422 - IC. CATV Return Amplifier.
Return RF amplifiers provide low noise amplification of broadband signals for subscriber drop installations.
Low Distortion Wideband 5 - 200MHz RF Module.
Supply Voltage / Current: 28V / 220mA Max.
Gain: 33.0dB
Noise Figure: 4.5dB
RF Power Input: 60 dBmV.
Direct Replacement: MHW1224
Package: Flange Module 7-Pin Module in a 9 Pin Footprint.
New Old Stock
Learn More - Mini Circuit Labs - CBL 1Z - MCL CBL 1Z - RF, Frequency Mixer. 8-dip.
Mini Circuit Labs - CBL1Z - MCL CBL 1Z - Plug -In Frequency Mixer
Status: Discontinued
RF, Frequency Mixer.
Genuine Vintage Mini Circuit Labs- New Old Stock - Rare
8-DIP, Plastic Package
Learn More - MAJOR - Filter Low Pass 1.6GHz Cut Off - Filter, RF. 1.6HGz low pass.Special Price $68.98 Regular Price $120.00
Filter, RF.
1.6GHz Low Pass.
Has 2 Female type "N" connectors.
Dimensions: 7.5"L x .75" D.
Learn More - Hewlett Packard - MSA0204 - IC. Cascadable bipolar MMIC amplifier. MSA-0204. New.$25.00IC. Cascadable bipolar MMIC amplifier. Silicon. 3dB bandwidth: DC to 1.8GHz. Case: RF 04 plastic package. New. Note: Alt P/N: MSA-0204. Learn More
- Hewlett Packard Agilent Avago - MSA3186 - IC. RF Microwave Amplifier.
Hewlett Packard Agilent Avago - MSA3186 IC. RF Microwave Amplifier.
The MSA-31XX series are high performance silicon bipolar RFIC amplifiers designed to be cascadable in 50 Ω systems. The stability factor of K > 1 contributes to easy cascading in numerous narrow and broadband IF and RF commercial and industrial applications.
Status: Discontinued
Frequency: 0Hz - 6GHz
3 dB Bandwidth: DC to 0.5 GHz
18.7 dB Gain at 1 GHz
3.5 dB NF at 1 GHz.
Package: SOT-143 SMD.
Note: Bipolar silicon.
Learn More - Hewlett Packard - WR-90 X810B - Waveguide Slottted Sections.Special Price $89.98 Regular Price $125.00
Hewlett Packard - WR-90 X810B
Coupling: 3dB
Band: X
Waveguide SLOTTED SECTIONS
Frequency Range: 8.20 - 12.40 HZ.
Waveguide I.D.: 0.900" +/- 0.0002 X 0.375" +/- 0.001"
Fits Waveguide Siaze:1" X 1/2" EIA WR90
Length: 10"
Equivalent Flamge: UG-135/U
WG Equivalent: WG16
- Agilent Hewlett Packard - 5082-3379 - Diode. Pin Diodes for RF Switching.
Agilent Hewlett Packard - 5082-3379 Pin Diode.
Pin Diodes for RF (VHF/UHF) Switching and Attenuating
Status: Discontinued July 2011
Features• Low Harmonic Distortion• Large Dynamic Range• Low Series Resistance• Low CapacitanceStatus: DiscontinuedCapacitance:0.40pF (400fF)
Breakdown Voltage: 50V
Current Rating:100A
Voltage Rating:1V
Minimum Operating Frequency: 30 MHz
Maximum Operating Frequency: 3 GHz
Enclosure Material: Glass
Operating Temperature: -65C to 150C
Dimensions: H 1.93mm X L 4.32mm
RS-2 Axial Leads.
New Old Stock
Alternate: Broadcom/Avago 5082-3379, 4807-402776, 5082-3379, 22-1058, AE 397-0049, HO5082-3379
NSN: 5961-01-092-9308
Applications: These general purpose switching diodes are intended for low power switching applications such as RF duplexers, antenna switching matrices, digital phase shifters, and time multiplex filters.
Learn More - General Instruments - 134176-000-99 - 900MHz 19dB 2W Linear RF Power AmpSpecial Price $79.95 Regular Price $95.00SIMILAR TO BGD902 2 Watt RF Power .The module has 19db gain flat from 3 to over 900MHz. Total power consumption : 24V * 0.45A = 10.8Watt -WITH SPEC SHEET Learn More
- BIRD - 6500-SP-1000-JN - Specialized, RF. Attenuator BCP 100dB.$25.00
BIRD - 6500-SP-1000-JN Specialized, RF.
Attenuator BCP 100dB.
Marked BCP100.
Mount: On 14mm Centers.
Note: Also marked 4706GSN1000JN.
Learn More - BIRD - 4278-311-1 - Directional Coupler. 0.5-1.0GHz.Special Price $68.98 Regular Price $85.00
BIRD - 4278-311-1 - Directional Coupler.
0.5-1.0GHz, 10dB.
Note: Used
Proudly Made in USA
Learn More -
- Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz. 50 Ω Impedance, Was Formerly Tuned 462.2375 MHz.Special Price $129.98 Regular Price $165.00READY TO SHIP - ONLY 2 LEFT IN STOCK!
Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz.
20-70-01, 450-470 MHz, Series-Notch Cavity Filter passes a relatively wide band of frequencies while rejecting a very narrow band of frequencies. It is equivalent to a series-tuned circuit. Notch depth is variable from 15-25 dB. Pass and notch frequencies must be known so that the optimum loop assembly can be used. This is the best filter for very close separations (200-400 KHz) in UHF applications. TX RX bandpass cavities has an adjustable selectivity characteristics (rotatable loops) to allow a trade-off between insertion loss (0.5-3.0 dB) and selectivity. Maximum power handling is typically determined by insertion loss setting. May be cascaded to achieve an arithmetic sum of individual filter attenuation.
- Various Low-Loss High-Rejection Models to choose from.
- All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
- Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.
Frequency Range: 450-470 MHz - May requires of requiring minor 462.2375 MHz retuning
Max Power per Cavity: 270 W, per cavity @ 0.5 dB IL
IL: 2.5 dB
Impedance: 50 Ω (ohms)
VSWR: 1.25:1 max.
Connectors: SMA (Std), Type-N, 7/16 DIN
Temperature Range: -30 to +60 °C
Dimensions: Overall Height 11" X 4" Diameter, 9" Canister Portion Height
Instruction Manual: https://txrx.com/wp-content/uploads/2018/11/7-9145-manual-02222017.pdf
Note: As Removed from Equipment - Used
Learn More - Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz. 50 Ω Impedance, Tuned 462.2375 MHz.Special Price $129.98 Regular Price $165.00Out of stock
Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz.
20-70-01, 450-470 MHz, Series-Notch Cavity Filter passes a relatively wide band of frequencies while rejecting a very narrow band of frequencies. It is equivalent to a series-tuned circuit. Notch depth is variable from 15-25 dB. Pass and notch frequencies must be known so that the optimum loop assembly can be used. This is the best filter for very close separations (200-400 KHz) in UHF applications. TX RX bandpass cavities has an adjustable selectivity characteristics (rotatable loops) to allow a trade-off between insertion loss (0.5-3.0 dB) and selectivity. Maximum power handling is typically determined by insertion loss setting. May be cascaded to achieve an arithmetic sum of individual filter attenuation.
- Various Low-Loss High-Rejection Models to choose from.
- All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
- Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.
Frequency Range: 450-470 MHz - Currently Calibrated @ 462.2375 MHz
Max Power per Cavity: 270 W, per cavity @ 0.5 dB IL
IL: 2.5 dB
Impedance: 50 Ω (ohms)
VSWR: 1.25:1 max.
Connectors: SMA (Std), Type-N, 7/16 DIN
Temperature Range: -30 to +60 °C
Dimensions: Overall Height 11" X 4" Diameter, 9" Canister Portion Height
Instruction Manual: https://txrx.com/wp-content/uploads/2018/11/7-9145-manual-02222017.pdf
Note: As Removed from Equipment - Used
Learn More - Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz. 50 Ω Impedance, Tuned 462.3875 MHz.Special Price $129.98 Regular Price $165.00READY TO SHIP - ONLY 1 LEFT IN STOCK!
Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz.
20-70-01, 450-470 MHz, Series-Notch Cavity Filter passes a relatively wide band of frequencies while rejecting a very narrow band of frequencies. It is equivalent to a series-tuned circuit. Notch depth is variable from 15-25 dB. Pass and notch frequencies must be known so that the optimum loop assembly can be used. This is the best filter for very close separations (200-400 KHz) in UHF applications. TX RX bandpass cavities has an adjustable selectivity characteristics (rotatable loops) to allow a trade-off between insertion loss (0.5-3.0 dB) and selectivity. Maximum power handling is typically determined by insertion loss setting. May be cascaded to achieve an arithmetic sum of individual filter attenuation.
- Various Low-Loss High-Rejection Models to choose from.
- All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
- Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.
Frequency Range: 450-470 MHz - Currently Calibrated @ 462.3875 MHz
Max Power per Cavity: 270 W, per cavity @ 0.5 dB IL
IL: 2.5 dB
Impedance: 50 Ω (ohms)
VSWR: 1.25:1 max.
Connectors: SMA (Std), Type-N, 7/16 DIN
Temperature Range: -30 to +60 °C
Dimensions: Overall Height 11" X 4" Diameter, 9" Canister Portion Height
Instruction Manual: https://txrx.com/wp-content/uploads/2018/11/7-9145-manual-02222017.pdf
Note: As Removed from Equipment - Used
Learn More - Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz. 50 Ω Impedance, Tuned 462.3125 MHz.Special Price $129.98 Regular Price $165.00Out of stock
Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz.
20-70-01, 450-470 MHz, Series-Notch Cavity Filter passes a relatively wide band of frequencies while rejecting a very narrow band of frequencies. It is equivalent to a series-tuned circuit. Notch depth is variable from 15-25 dB. Pass and notch frequencies must be known so that the optimum loop assembly can be used. This is the best filter for very close separations (200-400 KHz) in UHF applications. TX RX bandpass cavities has an adjustable selectivity characteristics (rotatable loops) to allow a trade-off between insertion loss (0.5-3.0 dB) and selectivity. Maximum power handling is typically determined by insertion loss setting. May be cascaded to achieve an arithmetic sum of individual filter attenuation.
- Various Low-Loss High-Rejection Models to choose from.
- All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
- Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.
Frequency Range: 450-470 MHz - Currently Calibrated @ 462.3125 MHz
Max Power per Cavity: 270 W, per cavity @ 0.5 dB IL
IL: 2.5 dB
Impedance: 50 Ω (ohms)
VSWR: 1.25:1 max.
Connectors: SMA (Std), Type-N, 7/16 DIN
Temperature Range: -30 to +60 °C
Dimensions: Overall Height 11" X 4" Diameter, 9" Canister Portion Height
Instruction Manual: https://txrx.com/wp-content/uploads/2018/11/7-9145-manual-02222017.pdf
Note: As Removed from Equipment - Used
Learn More - Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz. 50 Ω Impedance. Tuned 462.4125 MHzSpecial Price $129.98 Regular Price $165.00Out of stock
Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz.
20-70-01, 450-470 MHz, Series-Notch Cavity Filter passes a relatively wide band of frequencies while rejecting a very narrow band of frequencies. It is equivalent to a series-tuned circuit. Notch depth is variable from 15-25 dB. Pass and notch frequencies must be known so that the optimum loop assembly can be used. This is the best filter for very close separations (200-400 KHz) in UHF applications. TX RX bandpass cavities has an adjustable selectivity characteristics (rotatable loops) to allow a trade-off between insertion loss (0.5-3.0 dB) and selectivity. Maximum power handling is typically determined by insertion loss setting. May be cascaded to achieve an arithmetic sum of individual filter attenuation.
- Various Low-Loss High-Rejection Models to choose from.
- All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
- Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.
Frequency Range: 450-470 MHz - Currently Calibrated @ 462.412 MHz
Max Power per Cavity: 270 W, per cavity @ 0.5 dB IL
IL: 2.5 dB
Impedance: 50 Ω (ohms)
VSWR: 1.25:1 max.
Connectors: SMA (Std), Type-N, 7/16 DIN
Temperature Range: -30 to +60 °C
Dimensions: Overall Height 11" X 4" Diameter, 9" Canister Portion Height
Instruction Manual: https://txrx.com/wp-content/uploads/2018/11/7-9145-manual-02222017.pdf
Note: As Removed from Equipment - Used
Learn More - WJ - 11505030-1 - IC. RF amp.Special Price $10.49 Regular Price $14.50IC, RF Amp. Military specifications. Case: TO-8 hermetically sealed, blue test dots. Manufacture: Watkins-Johnson. Learn More
- Watkins Johnson - WJ-L34 - RF Limiter. Package: 4 Pin can, gold leads.$89.00RF Limiter. Package: 4 Pin can, gold leads. Learn More
- WAVETEK - 5010 - ATTENUATOR 0~10Special Price $41.95 Regular Price $49.00Attenuator 10dB/1dB Step, 0~10 Dial, with Microdot Connectors Learn More