RF
- T&M RESEARCH PRODUCTS - F-500-2 - Coaxial load 0.0100064 Ohm.$195.00Out of stockHigh power lab standard resistor. Coaxial load 0.0100064 Ohm. One end has a BNC female, opposite end teflon insulated, stud. Overall dimensions: 2.5" D x 7.5" long. Learn More
- POLYPHASER CORP - IS-NEMP-C2 - Nuclear Blast/Lightning Strike Protector 0.2-1GHz
POLYPHASER CORP - IS-NEMP-C2 - High Altitude Nuclear Blast / Lightning Strike Impulse Suppressor.
Coaxial Nuclear EMP Protector. This radio frequency surge protector / lightning surge arrestor helps protect your equipment from electromagnetic pulse (EMP) or power surges that are commonly caused by lightning or other strong electrical changes. Our radio frequency coaxial surge protector product is commonly used for radio and antenna installations where part or all system equipment is outdoors to protect sensitive equipment and is designed to pass 125 MHz to 1 GHz while suppressing DC surge.
Military, government (FEMA and NCA), protection of emergency radio equipment. UL497B listed gas tube, ultra-fast response, and low let through energy. Covers the frequency range of 125 - 1000 MHz.
Surge Protector Type: Gas Discharge Tube
Frequency: 0.2-1GHz
Connector: Equipment Side = Type N Female, Antenna Side = N Female
Impedance: 50 Ohm
125 - 220 MHz @ 200W
220 - 700 MHz @ 100W
700 MHz - 1GMHz @ 50 W
DC-Blocked
Operating Temperature: -50 C to 50 C
Throughput Energy: 250 uJ
This series is capable of 50,000A IEC 1000-4-4 8/20uS waveform surges.
The turn-on voltage is 250V.
Length: 2.72" (69.09mm)
NEW w/Spec.
Approvals: CE Compliant, RoHS Compliant
Applications: HF, UHF, VHF Radios, Ham Radio Protection.
Note: Unit must be properly grounded to low impedance (R&L) ground.
Learn More - Q-BIT - QBH154 - TO-8 RF AMPSpecial Price $159.95 Regular Price $190.00TO-8 RF AMP - cross: Spectrum Microwave TM5154 Learn More
- Q-BIT - QBH131 - TO-8 RF AMPSpecial Price $164.95 Regular Price $195.0017.1DB 5-1300Mhz TO-8 RF AMPlifier Learn More
- Q-BIT - QBH117 - IC. RF-IF Amplifier.Special Price $189.95 Regular Price $250.00Out of stockIC. RF-IF Amplifier. Power gain: 16.5dB. Noise figure: 1.5 to 1.8 dB. Frequency: 5-100MHz. Package: TO-8 (T4) Metal can 4 Pin. Learn More
- MAGNUM MICROWAVE - V32T-3 - RF AMP NEW MILITARY PARTSSpecial Price $159.95 Regular Price $191.95RF AMP - 4-pin Hermetically Sealed can - NEW MILITARY PARTS Learn More
- AVANTEK - ACT-120923 - 950-1250MHz Ultra Lo-noise 35dB AmplifierSpecial Price $395.95 Regular Price $499.00Avanpak Ultra Lo-Noise Narrow Band Amplifier cascaded module, 35.5dB gain, 1.5dB noise max 12-15VDC@95mA operating SMA(removable) connectors - premium performance - Military parts Case AX2 Learn More
- ANZAC - SW-204 - RF AMP MODULE 6-pin FlatpackSpecial Price $119.95 Regular Price $145.97RF AMP MODULE 6-pin hermetically sealed flatpack - Military Learn More
- ANZAC - DS-112 - 4-Way Power Divider 10-500MHzSpecial Price $179.95 Regular Price $229.95Four-Way Power Dividers 10 - 500 MHz hermetically sealed metal PIN-flatpack FP-5 50-Ohm 1W max In Military Module New Mixer - aka 5895-010639520get spex from M/A-COM Learn More
- ANZAC - DS-109 PIN - Two-way Power Divider 8-pin metal FlatpackSpecial Price $164.95 Regular Price $195.00Two-way Power Divider 1Watt 50-Ohms 10-500MHz 8-pin Hermetically sealed flatpack FP-2 Learn More
- Unidentified MFG - 15870-1607-A-00 - Coupler, bi-directional 400-450Mhz 40dB.$350.00Coupler, bi-directional. Incident: Frequency MC: 400, 425, 450MHz. Coupling DB: 40.5, 40.0, 39.5 Reflected: all the same as Incident. Dimensions: 11'' long with two Prodelin 521-835(2) 5'' Flange-to-''N'' Adapters approximately 10'' long each. Project: SPS-40. Military 97942-1A20305H01. Learn More
- Q-BIT - QBH989 - RF AMP w/ mounting hardwareSpecial Price $189.95 Regular Price $245.00RF AMP IN A CAN - New, with mounting kit. Caution - BeO Learn More
- NARDA - 3043-20 - Coaxial directional coupler 20 Db.$150.00Out of stockCoaxial directional coupler 20 Db, 2-4 GHZ. Used. Learn More
- NARDA - 3042-20 - Coaxial directional coupler 20 Db. Used.$400.00Coaxial directional coupler 20 Db, 0.95-2 GHZ. Used. Learn More
- Motorola - CA4915 - IC, RF. Linear W29196-ideband-UHF-VHF amplifier.Special Price $109.98 Regular Price $129.95
Motorola - CA4915 - IC, RF.
Linear Wideband-UHF-VHF Amplifier.
Upper 3dB Frequency (Hz)=1.2G
Lower 3dB Frequency (Hz)=10M
Volt Gain Min=16
Noise Figure Max. (dB)=9.0
Nom. Supp (V)=15.
Package: RFMOD flange module 9 pin, Gold Leads.
New Old Stock - Rare
Learn More - Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz. 50 Ω Impedance, Was Formerly Tuned 462.2375 MHz.Special Price $129.98 Regular Price $165.00READY TO SHIP - ONLY 2 LEFT IN STOCK!
Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz.
20-70-01, 450-470 MHz, Series-Notch Cavity Filter passes a relatively wide band of frequencies while rejecting a very narrow band of frequencies. It is equivalent to a series-tuned circuit. Notch depth is variable from 15-25 dB. Pass and notch frequencies must be known so that the optimum loop assembly can be used. This is the best filter for very close separations (200-400 KHz) in UHF applications. TX RX bandpass cavities has an adjustable selectivity characteristics (rotatable loops) to allow a trade-off between insertion loss (0.5-3.0 dB) and selectivity. Maximum power handling is typically determined by insertion loss setting. May be cascaded to achieve an arithmetic sum of individual filter attenuation.
- Various Low-Loss High-Rejection Models to choose from.
- All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
- Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.
Frequency Range: 450-470 MHz - May requires of requiring minor 462.2375 MHz retuning
Max Power per Cavity: 270 W, per cavity @ 0.5 dB IL
IL: 2.5 dB
Impedance: 50 Ω (ohms)
VSWR: 1.25:1 max.
Connectors: SMA (Std), Type-N, 7/16 DIN
Temperature Range: -30 to +60 °C
Dimensions: Overall Height 11" X 4" Diameter, 9" Canister Portion Height
Instruction Manual: https://txrx.com/wp-content/uploads/2018/11/7-9145-manual-02222017.pdf
Note: As Removed from Equipment - Used
Learn More - Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz. 50 Ω Impedance, Tuned 462.2375 MHz.Special Price $129.98 Regular Price $165.00Out of stock
Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz.
20-70-01, 450-470 MHz, Series-Notch Cavity Filter passes a relatively wide band of frequencies while rejecting a very narrow band of frequencies. It is equivalent to a series-tuned circuit. Notch depth is variable from 15-25 dB. Pass and notch frequencies must be known so that the optimum loop assembly can be used. This is the best filter for very close separations (200-400 KHz) in UHF applications. TX RX bandpass cavities has an adjustable selectivity characteristics (rotatable loops) to allow a trade-off between insertion loss (0.5-3.0 dB) and selectivity. Maximum power handling is typically determined by insertion loss setting. May be cascaded to achieve an arithmetic sum of individual filter attenuation.
- Various Low-Loss High-Rejection Models to choose from.
- All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
- Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.
Frequency Range: 450-470 MHz - Currently Calibrated @ 462.2375 MHz
Max Power per Cavity: 270 W, per cavity @ 0.5 dB IL
IL: 2.5 dB
Impedance: 50 Ω (ohms)
VSWR: 1.25:1 max.
Connectors: SMA (Std), Type-N, 7/16 DIN
Temperature Range: -30 to +60 °C
Dimensions: Overall Height 11" X 4" Diameter, 9" Canister Portion Height
Instruction Manual: https://txrx.com/wp-content/uploads/2018/11/7-9145-manual-02222017.pdf
Note: As Removed from Equipment - Used
Learn More - Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz. 50 Ω Impedance, Tuned 462.3875 MHz.Special Price $129.98 Regular Price $165.00READY TO SHIP - ONLY 1 LEFT IN STOCK!
Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz.
20-70-01, 450-470 MHz, Series-Notch Cavity Filter passes a relatively wide band of frequencies while rejecting a very narrow band of frequencies. It is equivalent to a series-tuned circuit. Notch depth is variable from 15-25 dB. Pass and notch frequencies must be known so that the optimum loop assembly can be used. This is the best filter for very close separations (200-400 KHz) in UHF applications. TX RX bandpass cavities has an adjustable selectivity characteristics (rotatable loops) to allow a trade-off between insertion loss (0.5-3.0 dB) and selectivity. Maximum power handling is typically determined by insertion loss setting. May be cascaded to achieve an arithmetic sum of individual filter attenuation.
- Various Low-Loss High-Rejection Models to choose from.
- All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
- Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.
Frequency Range: 450-470 MHz - Currently Calibrated @ 462.3875 MHz
Max Power per Cavity: 270 W, per cavity @ 0.5 dB IL
IL: 2.5 dB
Impedance: 50 Ω (ohms)
VSWR: 1.25:1 max.
Connectors: SMA (Std), Type-N, 7/16 DIN
Temperature Range: -30 to +60 °C
Dimensions: Overall Height 11" X 4" Diameter, 9" Canister Portion Height
Instruction Manual: https://txrx.com/wp-content/uploads/2018/11/7-9145-manual-02222017.pdf
Note: As Removed from Equipment - Used
Learn More - Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz. 50 Ω Impedance, Tuned 462.3125 MHz.Special Price $129.98 Regular Price $165.00Out of stock
Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz.
20-70-01, 450-470 MHz, Series-Notch Cavity Filter passes a relatively wide band of frequencies while rejecting a very narrow band of frequencies. It is equivalent to a series-tuned circuit. Notch depth is variable from 15-25 dB. Pass and notch frequencies must be known so that the optimum loop assembly can be used. This is the best filter for very close separations (200-400 KHz) in UHF applications. TX RX bandpass cavities has an adjustable selectivity characteristics (rotatable loops) to allow a trade-off between insertion loss (0.5-3.0 dB) and selectivity. Maximum power handling is typically determined by insertion loss setting. May be cascaded to achieve an arithmetic sum of individual filter attenuation.
- Various Low-Loss High-Rejection Models to choose from.
- All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
- Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.
Frequency Range: 450-470 MHz - Currently Calibrated @ 462.3125 MHz
Max Power per Cavity: 270 W, per cavity @ 0.5 dB IL
IL: 2.5 dB
Impedance: 50 Ω (ohms)
VSWR: 1.25:1 max.
Connectors: SMA (Std), Type-N, 7/16 DIN
Temperature Range: -30 to +60 °C
Dimensions: Overall Height 11" X 4" Diameter, 9" Canister Portion Height
Instruction Manual: https://txrx.com/wp-content/uploads/2018/11/7-9145-manual-02222017.pdf
Note: As Removed from Equipment - Used
Learn More - Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz. 50 Ω Impedance. Tuned 462.4125 MHzSpecial Price $129.98 Regular Price $165.00Out of stock
Bird - TX RX Systems - 11-70-01 460 - UHF Bandpass Cavity Filter, 450-470 MHz.
20-70-01, 450-470 MHz, Series-Notch Cavity Filter passes a relatively wide band of frequencies while rejecting a very narrow band of frequencies. It is equivalent to a series-tuned circuit. Notch depth is variable from 15-25 dB. Pass and notch frequencies must be known so that the optimum loop assembly can be used. This is the best filter for very close separations (200-400 KHz) in UHF applications. TX RX bandpass cavities has an adjustable selectivity characteristics (rotatable loops) to allow a trade-off between insertion loss (0.5-3.0 dB) and selectivity. Maximum power handling is typically determined by insertion loss setting. May be cascaded to achieve an arithmetic sum of individual filter attenuation.
- Various Low-Loss High-Rejection Models to choose from.
- All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
- Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.
Frequency Range: 450-470 MHz - Currently Calibrated @ 462.412 MHz
Max Power per Cavity: 270 W, per cavity @ 0.5 dB IL
IL: 2.5 dB
Impedance: 50 Ω (ohms)
VSWR: 1.25:1 max.
Connectors: SMA (Std), Type-N, 7/16 DIN
Temperature Range: -30 to +60 °C
Dimensions: Overall Height 11" X 4" Diameter, 9" Canister Portion Height
Instruction Manual: https://txrx.com/wp-content/uploads/2018/11/7-9145-manual-02222017.pdf
Note: As Removed from Equipment - Used
Learn More - SIEMENS - CGY40 - GAAS MMIC 100 MHZ TO 3 GHZ.$135.00GAAS MMIC (Single-stage monolithic microwave ic mmic amplifier application range:100 MHZ TO 3 GHZ... Learn More
- Q-BIT - QBH-842 - IC. Hybrid amplifier, 10-250MHz, 13.5dB.$199.00IC. Hybrid amplifier, 10-250MHz, 13.5dB. Case: TO-8 3 Pin, gold leads. Factory new. From manufactures package. Learn More
- Q-BIT - QBH199 - IC. RF-IF Amplifier.Special Price $164.95 Regular Price $195.00IC. RF-IF Amplifier. Power gain: 26.4dB. Noise figure: 3.9dB. Frequency: 200MHz. Supply voltage: 5V. Package: TO-8 (T4) Metal can 4 Pin gold leads. Learn More
- Q-BIT - QBH198 - IC. RF-IF Amplifier.Special Price $164.95 Regular Price $195.00IC. RF-IF Amplifier. Power gain: 28.3dB. Noise figure: 3.9dB. Frequency: 450MHz. Supply voltage: 5V. Package: TO-8 (T4) Metal can 4 Pin gold leads. Test dots. Learn More