Specialized
- Philips - 483513047118 - Transistor, NPN. High voltage. New.$8.75READY TO SHIP - ONLY 4 LEFT IN STOCK!Transistor, NPN. High voltage. Case: TO-218. New. Note:Double marked 5H7-2. (Cross NTE2318. Must used with insulating hardware, not supplied). Learn More
- Harris Corp - 100453 - PLCC DTC200 DGTL SET REV-OSpecial Price $6.71 Regular Price $8.95PLCC DTC200 DGTL SET REV-O for DAVID SYSTEMS Learn More
- Western Electric - 1586 L INDR - Inductor, telephone. 260mH.$9.99Inductor, telephone. 260mH. Plastic housing. Mount: PCB. 4 leads with 0743" centers. Dimensions: 1.175" long x 1.1" wide x 1.086" high. Note: New older stock. Learn More
- Varo - H477-1 - Diodes, High Voltage. 12KV 10ma.
Varo - H477-1 - Diode, High Voltage.
Ratings: 12KV 10mA.
Package: Axial Leads.
Size: 25.5mm (1.007") long x 6.3mm (0.251") Diameter.
Genuine Varo - New Old Stock- Slight Lead Tarnish does not impact Operation
Alternate: HL1200
Learn More - TRANSITION ENGINEERING - CX-1134 - CX Series RJ11 to BNC balun Adapter.IN STOCK - MORE THAN 100 READY TO SHIP!
TRANSITION ENGINEERING - CX-1134 Connector, BNC.
Type RFI FIlter
A balun /ˈbælʌn/ (portmanteau of "balanced to unbalanced") is an electrical device that converts between a balanced signal and an unbalanced signal.
Premium extended CX-1134 RJ11 to BNC connector balun.
Compatible with AT&T, ITT, LEE DATA, MEMOREX and TELEX type A devices with data rate of 2.35Mbps.
Transmission distance is 50 feet min and 2500 feet maximum.
Unit has three winding transformer/choke configuration to filter RFI.
Coax Cable Requirement is 90-110 Ohm.
Made in USA
See SKU 4659 for RJ11 Cord.
Alternate: 555329-1
Learn More - NORTH HILLS - NH 12477 - Connector, Coax. Wang to Dual Coax Adapter.$7.50
NORTH HILLS - NH 12477 - Connector, Coax.
Wang to Dual Coax; One TNC and one BNC to Twisted Pair RJ12 Telephone Wire Connector Module.
This unit used only 4 pins of the RJ12 connector.
Learn More - Citizen Watch Co - 92TA - Backlight Unit- Opto Display. Electro-luminescent Panel 9VDC.IN STOCK - MORE THAN 500 READY TO SHIP!
Citizen Watch Co - 92TA Backlight Unit - Opto Display.
Normal color is an unobtrusive orange-pink, but when a 9V battery (or 6 - 12VDC) is applied it magically becomes a pinkish white. Bright enough to become the backlight for a citizen compact personal LCD TV. (Not included).
Electro-Luminescent panel 9VDC.
Size: 1.5 x 2.0".
With internal 9V to High Voltage Inverter.
Overall dimensions: 2.75 x 2.8 x about 0.75" thick, the EL screen itself is very thin.
Applications: Perfect for signs, emergency lighting, special effects. Can also be used on 120VAC with out the inverter.
Note: When you look at it with the two electrical connections on top, the positive is on the left. Large Light !
Made in Japan
UPC 81514 00920
Learn More - BIRD - 5-1357-3 - Connector, Electronics Solder Eyelet, Rivet/Eyelet/Terminal. Package of 100.
BIRD - 5-1357-3 Connector, Electronic Solder Eyelet, Rivet/Eyelet/Terminal.
Electronic eyelets are flanged tubular metal conductors inserted into a printed circuit board. They make electrical continuity between the circuitry on both sides of the board, and are an attachment point for soldering component leads.
Type: Solder.
Appears to be Silver Plated Brass (High thermal and electrical conductivity)
Metric Dimensions: Outside lip is 6.1mm OD, 2.9mm ID with a shaft 3.5mm round and 6.7mm tall under Lip.
Inch Dimensions: Outside lip is 0.240" OD, 0.114" ID with a shaft 0.138" round and 0.264" tall under Lip.
Applications: Secure High Current Electrical and Ground Connections or repairs to chassis and PWBs.
Chose the proper eyelet keeping the following in mind:
LUF The length of the eyelet barrel under the flange should be 0.020-0.035”/0.630-0.890mm greater than the thickness of PCB(this allows the for the right length after the flange is formed)
ID Eyelet inside diameter should be 0.003-0.020”/0.075-0.500mm greater than the component lead diameter for proper fit of the eyelet through-hole component lead.
FD The flange diameter should be sized so that it does not protrude out onto other pads or conductors in the vicinity
OD The clearance in the PCB hole should allow the eyelet to be inserted without undue force but, but should not exceed 0.125mm greater than the eyelet outside diameter.Additional Information: http://www.intl-eyelets.com/short_course_on_electronic_eyelets.htm
Genuine Vintage Bird Electronics Hardware - New Old Stock
Package of 100.
Learn More - ARZEL TECH. - 8-357 – Magnetic Sheets, 6” X 6" SQ. X 30 Mil, 10 Pieces, Per Roll.Special Price $8.98 Regular Price $14.95ARZEL TECH. - 8-357 – Magnetic Sheets, 6” X 6" SQ. X 30 Mil, 10 Pieces, Per Roll. Unprintable – Non-Adhesive - Durable - Flexible Magnetic Sheets - Perfect for covering air vents where you don't want Hot or Cold air blowing into an unused room. Very flexible but not strong magnetism, but fine for steel grates and playing around with steel Filings. Can be drilled, shaped, or cut to fit corners and contours. Dimensions: 6" x 6" x 0.03" Grey Thickness: 30 Mil - 0.03" (0.762mm) Sold 10 PER ROLL Learn More
- Amazon Basics - E119932-T - DVI-D Dual Link to DVI Monitor Adapter Cable - 9.8 Feet (3 Meters)
Amazon Basics - E119932-T - DVI-D Dual Link to DVI Monitor Adapter Cable - 9.8 Feet (3 Meters)
Gold plated DVI-D Dual Link to DVI (24+1) connector for optimal conductivity
High speed transmission rates up to 9.9 GBPS
Max. Resolutions up to 2560X1600
Includes ferrites to prevent signal loss
Connector Type: DVI-D, Cable Type: DVI
Color: Black
Applications: Connect your DVI equipped device to flat panel displays, digital CRT displays, projectors, HDTV and Video Projectors, including DFP and LCD types.
Learn More - Western Electric - 723A - Telecom. Telephone Receiver Earpiece.Special Price $6.98 Regular Price $8.50
Western Electric - 723A Telecom. Telephone Receiver Earpiece.
For operator's headsets.
Vintage Molded Bakelite
Size: 2.25" D x 1.25" and has two mounting holes on either side of black WE plastic.
Accepts two wires or lugs to gold terminals inside the replaceable 4IN81 Element.
Learn More - Western Electric - 464A - DUAL 1/4" 2-COND PHONE PLUGSpecial Price $6.98 Regular Price $12.50
Western Electric - 464A - Dual 2-Conductor Phone Switchgear Plug
1 per Bag.
Material: Heavy Duty Solid Brass.
Screw Terminals - Brass "T" Cable Clamp.
Authentic Vintage Western Electric - New Old stock
Complete with hardware.
Learn More - Western Electric - 440-201 - Telephone Earpiece Receiver. Magnetic Low Impedance.Special Price $6.98 Regular Price $9.50IN STOCK - MORE THAN 100 READY TO SHIP!
Western Electric - 440-201 Telephone Earpiece Receiver.
Magnetic Low Impedance (Low-Z).
Genuine (WE) Western Electric Vintage Replacement for Handsets.
Dimensions: 52mm D x 20mm deep with two screw terminals.
Color: Black Bakelite.
Genuine Vintage Western Electric Earpiece - New Old Stock.
Dimensions: 2.044" Diameter x 0.78 Depth, Inner Diameter Tapers down to 1.37"
Connections: 2 Compression Screws
Mounting" Possibly by 2 Small Holes Approximately 0.085" Diameter 180 Degrees Across (See Picture 4).
Made in USA
Learn More - Western Electric - 2576B - Transformer, telephone.$9.99Transformer, telephone. Similar to a Ferrite inductor. Mount: PCB 9 leads. No housing. Dimensions: 1.111" long x 0.656" wide x 1.010" above board. Note: New older stock. Learn More
- Unidentified MFG - VDS II KEYSET SEC-55-2 - Keypad. VDS II Keyset. Telephone keypad with 41 switches.READY TO SHIP - ONLY 52 LEFT IN STOCK!
VDS II KEYSET SEC-55-2 Keypad.
VDS II Keyset.
Telephone keypad with 41 switches.
Fifteen (15) top keys are illuminated/LEDs.
Next section is a standard 16 key DTMF keypad.
The nest section has 10 keys, illuminated with legends.
Two flat flexible ribbon cables, 14 and 16 conductors.
Dimensions: 4" x 8". Note: SEC-55-2 keypad.
Learn More - TRANSITION ENGINEERING - CX-1134-6 - CX Series RJ11 (F) ro 6" BNC conn balun adapter.READY TO SHIP - ONLY 13 LEFT IN STOCK!
TRANSITION ENGINEERING - CX-1134-6 Connector, BNC.
Premium extended CX-1134-6 RJ11 female to 6" coax cable compatible with AT&T, ITT, LEE DATA, MEMOREX, TELEX type A devices data rate 2.35Mbps.
Transmission distance is 50 feet min and 2500 feet maximum.
Unit has three winding transformer/choke configuration to filter RFI.
Coax cable requirement is 90-110 Ohm.
Made in USA
Learn More - ProAm - 4894000 - Connector, Coax. UHF SO-239 Female to SO-239 Female Coupler, UHF Right Angle 90 Degree Elbow, High Power.Out of stock
ProAm - 4894000 - Connector, Coax. UHF SO-239 Female to SO-239 Female Coupler, UHF Right Angle 90 Degree Elbow.
Sturdy & Well Made - Made of brass copper body and teflon insulator for a good connectivity and reliable signal every time. Heavy duty and water proofing body to nesure secure fit.
SO-239 Female to SO-239 Female Coupler
Right Angle Elbow
Impedance: 50 Ohm
Made of brass copper and teflon insulator for a reliable signal every time.
Material: Nickel-Plated Machined Brass Construction
UHF 90 Deg Female, Threaded Bulkhead with washer to Female Threaded
Extra Heavy Duty / High-Power.
Life/Durability :≥ 1000 Cycles.
Dimensions: 1" OD x 1.85" High x 1.37" Wide.
Applications: CB Radio Ham Radio, VHF Radio, antenna, Two Way Radio Amateur Radio Marine VHF Radio, SWR Meter,
Learn More - NORTH HILLS - NH 12448 - Connector, BNC. Female BNC to RJ12 balun.$7.50Connector, BNC. Female BNC to RJ12 balun. This unit only uses 4 pins of the RJ12 connector. Learn More
- Mini Circuit Labs - AT3 - Attenuator, fixed. Hermetically sealed.Special Price $6.74 Regular Price $8.99Attenuator, fixed. Hermetically sealed. Learn More
- Panasonic MATSUSHITA - 55SI-25D AWC - Motor, Stepper. 12V 36 Ohm 7.5 Deg 6 Wire.Special Price $6.98 Regular Price $8.50READY TO SHIP - ONLY 90 LEFT IN STOCK!
Panasonic MATSUSHITA - 55SI-25D AWC Motor, Stepper.
12V 36 Ohm 7.5 Deg 6 Wire.
Dimensions: 2.042" (51.8mm) D body, overall with mount 3.138" (79.7mm) long.
Heatsink is 2.955" (75.0mm) wide x 1.027" (26.00mm) high.
Shaft 1/4" half flat x 0.750" (19.0mm) long.
With attached 6 position female header connector.
Silicon Grease is between the motor the heatsink.
Weight 11 oz.
Note: Arduino driven using low cost driver IC ULN2003 transitor array also in our stock.
For More Detals Rreference: https://arduinodiy.wordpress.com/tag/stepper-motor/
Manufactured by Matsushita for Coleco Adam.
Made in Japan
Learn More - HUMPHREY - P5098 - 1.5VDC Oxygen Valve / Manual SwitchSpecial Price $8.98 Regular Price $14.50
HUMPHREY - P5098 - 1.5VDC Oxygen Valve / Manual Switch
Meriam Medical Equipment - New Old Stock!!
Approximate Overall Dimensions: H 1/ 1/8" X L 2" D 7/8"
Also See SKU
Proudly Made in USA
Learn More - CUSTOM - COPPERTEX-B - Copper Finger Shielding Stock/Gasket/Strips. EMI/RFI Shielding Solution, Package of 5.IN STOCK - MORE THAN 100 READY TO SHIP!
CUSTOM - COPPERTEX-B - Copper Finger Shielding Stock/Gasket/Strips.
Beryllium Copper (BeCu) is a high performance metal which can be fabricated into a wide variety of components. Its mechanical and electrical properties make it the ideal material for EMI/RFI shielding products.
EMI/RFI Shielding Solution - Gasket Strip
- Excellent electrical and RF conductivity
- High tensile strength
- High shielding effectiveness
- Superb resistance to corrosion
- Very long lifespan
- Easy installation
- Numerous plating options
- Excellent performance at high temperatures
- Moisture and UV resistant
Berllium Copper Finger Stock - 0.15 x 0.40 x 4.25"L, 44 fingers.
Reverse Bend Spherical Shape
Similar Alternate: Tech Etch 93R1D
New Old Stock
Package of 5.
Learn More - CONAIR - OKI - PR5001H5 - Trim-Line Hand Set Telephone (no base included)READY TO SHIP - ONLY 25 LEFT IN STOCK!
CONAIR - OKI - PR5001H5 Trim-Line Hand Set Telephone (no hang-up base included).
White Numerals on Huge Buttons
Black Body
Black Coil Curly Cord
Redial Button
Ring Tone or Pulse Switch
Off Low High Switch
Ringer Equivalence: 1.4B
New Replacement Handset which requires use with a Base Unit.
Neat & Attractive !!!
Vintage Genuine Conair New-Old Stock
Learn More - Avantek - MSA0104 - IC. Cascadable bipolar MMIC amplifier.$9.99IC. Cascadable bipolar MMIC amplifier. Silicon. Case: RF 04 plastic. New. Learn More