Military Switch

Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC. Actuator: On-Off (Ctr). Connection: screw terminals. Mech: panel mount, bushing. Body: 1.338" long x 0.750" wide x 0.757" high plus terminals. Bushing: 3/8" D x 0.480" long. Shaft: 0.650" long. Note: Military double marked MS35059-24, NSN 5930-006362821. Learn More

Switch, toggle. Contacts: DPDT. Contact Ratings: 18Amp 115VAC. Actuator: On-Off-(Mom). Connection: screw. Mech: panel. Panel hole: 1.332" long x 0.750" wide x 0.80" deep. Threaded bushing: 0.470" long (seated 0.643" long). Note: Double marked Military MS35059-31. Enviormentally sealed switch. Used/Removed from equipment. Learn More

Switch, push. 4PDT 115VAC/28VDC. Enclosed type. Both positions maintained single switch unit, enclosed. Mount: panel. Note: Illumination color: green. Vibration resistant. Contact: 15 solder tabs. Military NSN 5930-01-360-4000. Learn More

Cutler-Hammer / Eaton - 8652K1 Switch, lever.

DPST, Normally Open,

20A 125VAC/10A 250VAC, 1-1/2HP 250V, 1HP 250VAC.

Momentary, with Integral Retain-On pin, Overahanging tool, Metal Delrin Trigger/Actuator.

Dimensions: base 2.250" long x 1.009" wide x 0.751" high.

Overall with lever 3.5" wide x 2-1/16" high.

Terminals: 4 screw contact.

Complete with screws.

Made in USA

Learn More

Cutler-Hammer / Eaton * - 8804K12 - ST40F - Switch, toggle.

A switch which is externally actuated by a lever and whose contacts open and close with an instantaneous (snap) action; includes items having one or more momentary positions. 

SPDT On/ON(Mom).

Double marked ST40F.

20A @125 VAC, 10A @250, 3/4HP 250VAC, 1/2HP@ 125VAC

30.0A DC

Threaded bushing length: 0.538".

Actuator: sealed 0.673" long.

Dimensions: 1.146" long x 0.628" wide x 0.640" high.

Contacts: 3 screw terminals.

New Old Stock

NSN 5930-00-239-6052

Alternate: 4026S

Applications: Aircraft Toggle Switch

Learn More

Cutler-Hammer / Eaton * - 8803K8 - Switch, Toggle.

SPST On/None/Off, 2 position.

Threaded Bushing Length: 0.382".

Lever Length: 0.655".

Dimensions: 1.148" long x 0.633" wide x 0.630" high.

Contacts: 2 Solder Terminals.

Complete with washers and nuts.

NSN 5930-00-994-7280

Alternates: C290034, C29-0034, SMC596617, SM-C-596617, 6AT124T, 6AT124-T, 5930-00-871-7280, 00-871-7280, 5930008717280, 008717280

New Old Stock

Applications: Aircraft Switch

New Old Stock - Made in USA

Learn More

Eaton CUTLER-HAMMER - MS35058-26 - 8804K13 - Switch, toggle.

SPDT On/ON(Mom).

Double marked 8804K13.

Maximum voltage: 220VAC/250VDC.

Threaded bushing length: 0.513".

Actuator: sealed 0.675".

Dimensions: 1.14" long x 0.647" wide x 0.618" high.

Contacts. 3 screw terminals.

Learn More

Safran Eaton CUTLER-HAMMER - 8511K1 - Switch, Toggle.

DPDT On/Off/On.

Bushing length: 0.433".

Lever length: 0.694".

Environmentally Sealed.

One Hole Mount.

Dimensions: 1.333" long x 0.900" wide x 1.230" high.

Contacts: 6 Screw Terminals.

Complete with washer and nut.

New Old stock

Learn More

Switch, toggle. SPST, 2 position, 6Amp 125VAC/3Amp 250VAC. Threaded bushing length: 0.50". Actuator length: 0.50". Dimensions: overall with contacts 1.357" long x 0.66" wide x 0.652" high. Contacts: 2, 3/16" quick connect male terminals. Learn More

Cutler-Hammer / Eaton - 8290K15 - Switch, Toggle.

SPST 3Amp 250VDC

Switch Operation: On-Off

2 Position, Both Positions Maintained.

Mount: Threaded 0.465" D shaft

2 Wire Leads and Hardware in Manufacturers' Packaging

Military NSN 5930-00-255-5759 replaces  NSN 5930-00-228-0206.

Ideal for Hazardous Locations, Dustproof.

Alternates: 8290K15, R3420-6, 60595, 13788, A1245, 8290K15

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 15Amp 115VAC / 28VDC. Actuator: On-(Off). Connection: screw terminals. Mech: Panel. Panel hole: 1.310" long x 0.721" wide x 1.171"deep (overall) or 0.70" if mounted to panel front. Threaded bushing 0.473" long. Environmentally sealed actuator. Note: Military double marked MS25306-292. New, complete with hardware. Military NSN 5930-008221829. Learn More

JBT - MS35059-26 Switch, Toggle.

Contacts: DPDT.

Actuator: On (Mom) - On.

Connection: screw.

Mech: Panel.

Panel hole: 1.345" long x 0.766" wide x 0.813" high, plus contacts.

Standard 15/32" threaded bushing x 0.460" long.

Note: Complete with hardware.

Environmentally sealed switch.

Made in USA

NSN 5930-00-615-7880

Learn More

Switch, toggle. Contacts: DPDT MOM.(N.C.). Contact Ratings: 15Amp 125VAC. Actuator: On-(Off). Connection: screw terminals. Mech: Panel, bushing. Panel hole: 1.34" long x 0.78" wide x 0.738" deep, plus terminals.. Note: Standard 3/8" D bushing x 0.467" long (0.647" long seated). Actuator extends 0.705". Up position MOM. Double marked 8828K25. Learn More

CUTLER-HAMMER - MS35058-31 - 8809K16 - JBT58 - Switch, Toggle.

Eaton’s military purpose switches are designed to meet the requirements of MIL-S-83731. Sealed Switches have a silicone rubber lever seal assembled between the lever and the bushing to resist the entrance of contaminants such as dust, sand or water into the contact structure. The switch mechanisms are completely enclosed to resist the entrance of contaminants into the switch. All metal parts are plated to resist corrosion. The heavy duty switches are offered in both standard toggle lever and lever lock versions. Circuit designations are stamped on the side of each switch.

SPDT On/Off/ON(Mom), 3 pos.

Double marked JBT58, Formerly Known as ST42H.

Maximum voltage: 220VAC/250VDC.

Threaded bushing length: 0.505".

Actuator: sealed 0.663" long.

Dimensions: 1.132" long x 0.627" wide x 0.664" high.

NSN 5930-00-655-1523

Contacts: 3 screw terminals. 

 

Learn More

Safran - Cutler-Hammer - Eaton - 8867K5 Switch, toggle.

DPST On/Center -off.

Threaded bushing: 1/4" D x 0.144" long.

Actuator: 0.445" long.

Dimensions: 0.530" x 0.544", square.

Termination: 4 solder terminals.

Note: Miniature. Complete with hardware.

NSN: 5930-00-889-8602

Made in USA

Learn More

Switch, toggle. Contacts: SPST.MOMENTARY (N.O.) Contact Ratings: 5Amp 125VAC. Actuator: Off-(On). Connection: screw terminals. Mech: Panel, bushing. Panel hole: 1.143" long x 0.633" wide x 0.62" deep, plus terminals. Note: Standard 3/8" D bushing x 0.387" long (seated). Actuator extends 0.664". Learn More

Cutler-Hammer / Eaton * - 8803K13 - Switch, toggle.

SPST Center-Off/On, 2 Position.

Threaded Bushing Length: 0.509".

Lever Length: 0.658".

Dimensions: 1.147" long x 0.633" wide x 0.618" high.

Contacts: 2 Solder Terminals.

Complete with washers and nuts.

Applications: Aircraft Switch

Learn More

Cutler-Hammer / Eaton * - 8803K10 - ST42A - Switch, toggle.

Contacts: SPST.

Actuator: On-Off.

Mech: Panel, single hole mount.

Body: Threaded bushing length: 0.493".

Lever length: 0.705".

Dimensions: 1.144" long x 0.631" wide x 0.617" high.

Contacts: 2 solder terminals.

Complete with washers and nuts.

Note: Double marked ST42A.

NSN 5930-00-112-5288

New Old Stock

Applications: Aircraft Toggle Switch

Learn More

Switch, toggle. SPDT 2 Position 3Amp 125VAC/1Amp 250VAC. Threaded bushing 3/8" D x 0.334" long. Actuator: Bat 0.653". Material: plastic. Mount: panel. Dimensions: 1.158" long x 0.690" wide. Termination: 3 solder terminals. Complete with hardware. Learn More

Switch, toggle. SPDT 10Amp 250VAC. 2 Position, On/None/ON(Mom). Bushing length: 1/2". Lever length: 9/16". Contacts: 3 - 1/4" quick connect terminals. More info: Page 154 http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/pg07002001e.pdf Learn More

EATON CUTLER-HAMMER - SS12EV10-102L4 - Switch, Micro with Roller.

High Quality Snap Switch

Contacts: Normally Open

Current: 15A

Voltage:125/250VAC.

Made in USA

Learn More

Eaton CUTLER-HAMMER - 8690K11 - Switch, Toggle.

DPDT, 2 position, 15Amp 125VAC/10Amp 250VAC.

One Hole Panel Mount.

Dimensions: 2.5" long x 1.158" wide x 1.055" high. 0.95" behind panel.

Contacts: 6 screw terminals.

New Old Stock

Alternate: TE Connectivity 8690K

Learn More

Safran Eaton CUTLER-HAMMER - 8511K7 - Switch, toggle.

DPST, Off/ON(Mom).

Threaded bushing length: 0.461".

Lever length: 0.681".

Environmentally sealed.

One hole mount.

Dimensions: 1.324" long x 0.891" wide x 1.224" high.

Contacts: 4 screw terminals.

Complete with hardware kit.

 

Learn More

Safran Eaton CUTLER-HAMMER - 8511K6 - Switch, toggle.

DPDT Center-Off, 3-position

Bushing length: 0.450".

Lever length: 0.680".

Environmentally sealed.

One hole mount.

Dimensions: 1.327" long x 0.897" wide x 1.230" high.

Contacts: 4 screw terminals.

Complete with hardware kit.

New Old Stock

Learn More