Proximity Switch

Pneumatic cylindicator proximity switch, 115VAC 50/60Hz 0.5Amp. Sensing distance: approximately 0.100" +/- 0.005". Probe 2.950". Material: plastic. Listed: UL. Learn More

Namco Controls - EE510-53400 - Switch, Proximity.

10-30VDC 100mA.

With LED "Power-On" Indicator.

Max sensing range: 1/2".

Recom sensing range: 1/4".

1/2 - 14 NPSC connection

New.

Prroudly Made in USA

Learn More

TUBULAR PROXIMITY 10-30VDC 100MA RF INDUCTIVE NON CONTACT SWITCH

Learn More

ISS - Industrial Solid State Controls - 1280-1-A - 9918-26 - Switch, Proximity.

Type: Barrel, Inductive - 3 Wire

Normally Open (NO) Contact

Voltage: 10.8 - 30VDC

Load: 80mA.

Used, removed from equipment.

Alternate: 9918-26.

Note: Various length cords, ePicture showing shortes cord.

Made in USA

Learn More

DP Receptacle for plug-in limit switch. Learn More

General Electric - CR215DBX03 Threaded Barrel Proximity Switch Accessory

30mm Mounting

Learn More

General Electric - CR215DBX02 - Threaded Barrel Proximity Switch Accessory

18mm Mounting Bracket

Made in USA

Learn More

Eaton - Cutler-Hammer - E57-18LU08-D  Switch, Proximity.

Premium Series -Inductive

Output: Normally Open

Sensing Range: 8mm.

Supply: 10-50VDC 200mA.

Max. Load Current: 0.25 Amps

Body Composition: Metallic

Status Indication: LED

Connection: 2-meter 2-conductor unshieded cable.

Body: 18mm diameter, threaded with two nuts.

Non Embedable.

Short Circuit Protected / Reverse Polarity Protection

With Wiring Diagram.

UPC 782113922478

UL, CE Approved.

 

Learn More

Sensor, proximity. Inductive tubular NO PNP 10-50VDC 200mA cont. Series: E1. Size: 30mm. Sensing range: 7mm. Cable embeddable 300V, 3 conductor. Learn More

TURCK - Bi20-G47-AZ3X-B2131 Proximity sensor. Inductive.

Sensing distance 20mm.

Switches 20-250VAC 3-400mA.

Switches 10-300VDC 3-300mA.

Flush 47mm 2Wire.

Housing Material: Brass

Mount: Flush

Operating Temperature:  -25 °C to 70 °C

Operating Supply Voltage:250 V

Switching Frequency: 20 Hz

Termination: Connector

Dimensions: Length 76 mm

Compliance Ratings: IP67

RoHS Compliant

With attached connector.

Learn More

TURCK - RSF40-0.3M /NPT- 4-Pin Male Minifast Panel-mount Receptacle

12-inch leads, factory attached and molded into receptacle.

Contact Material: Brass/Gold

Rated Current: 9.0A

Rated Voltage: 600V

Conductor Insulation Material: PVC

Number of Conductors: 4 X 18AWG

Temperature: -40C to 105 C

For PhotoElectric and Proximity Sensors.

Learn More

INDUCTIVE LIMIT SWITCH- 40MM SENSING RANGE- 10-30VDC 200mA NON FLUSH MOUNTABLE- 1/2"NPT CONDUIT ENTRANCE- N.O. AND N.C. OUTPUTS- PNP CRASTIN 4-Wire Learn More

Switch, proximity. Separate amplifier proximity. Supply voltage: 10- 30VDC. Barrel size: 40mm. Target material: ferrous. Sensing distance: 20mm. Sensor body style: metal cylindrical. Lead free. Rohs compliant. More info: http://www.ia.omron.com/data_pdf/data_sheet/e2c_e2c-h_dsheet_csm445.pdf Learn More

Sensor, proximity. NO 120VAC 50/60Hz 60VA. Non-ferrous sensing only. Complete with attached 8 foot cable and manufactures specification sheet. Learn More

NAMCO CONTROLS - ET120-23420 - Switch, Proximity.

Contacts: 2 watt AC NO.

Contact Ratings: 80-250VAC 200mA.

Note: Sensing range: 4mm. Inductive tubular threaded barrel.

Unshielded. Led, red. 3 Pin micro connector.

Husing Material: Metal.

Housing Llength: 86mm.

Learn More

PROX SWITCH Learn More

PROXIMITY SWITCH

Learn More

NAMCO CONTROLS - EE520-30520 PROXIMITY SWITCH

Learn More

Switch, proximity. DC Interfacer sensor. NO Output, 10-30VDC 100mA 18mm 2 wire. All metal housing. Connector: 4 Pin male micro-connector. Learn More

MICRO SWITCH - 20FR5-6B - Factory New Magnet Actuated Reed Proximity Switch

Normally Closed (NC) with No Nagnet Opens with magnet next to the Explosion Proof Housing

Internal dry reed switch, hermetically sealed contacts
Industrially packaged in aluminum housings
Matching permanent magnet unit
1/2 inch conduit outlet
Meets portions of NEMA enclosure Type 1, general purpose; Type 2, driptight; Type 3, weather resistant; and, Type 12, industrial Use
Slide-by, head-on or vane actuation
Designed to be compatible with solid state logic level input requirements

Voltage: 500VDC Max, 1.5Amp Max

20 Watt Max.

SPST Relay Contact

Factory New Old Stock - In Manufacturer's Packaging with Instructions and Bracket.

Made in USA

Note: This product was oroginally branded labeled Honeywell, Microswitch, later Yamatake, Pepperl+Fuchs, Visolux, or Azbil.

Learn More

Honeywell/Microswitch - PK 80420 - 973AA3JM-A7T-L - Sensor, Proximity.

Status: Discontinued

Sensor Type: 2 wire AC N.O.

Supply Voltage: 20-250VAC

Connection: 3-PIN

Sensing Range: 5mm 

Load Current Min//Max.: 5/500mA

Leakage Current: 1.7mA @120V

Voltage Drop: 9.5V @25 C

Repeatability: 3%

Hysteresis: 15%

18mm Target

18mm Diameter.

Approvals: UL, CSA

Alternate: NBB518GM60WSV12SUB

Made in USA

Learn More

PROXIMITY SENSOR 3-wire 17.5mm diameter, pretty blue Learn More

12mm-dia 3-wire PROX. SENSOR 9.6 - 55 VDC 200mA IP67-class CENELEC 5008 - either 2mm or 5mm sensing distance . . . Learn More

Switch, proximity. Large 1.18" / 30mm Threaded Barrel Proximity Switch sensitive to all conductive metals. EXTENDED RANGE 10-30VDC Sink-Output N/O 250mA 10-30VDC UnShielded-type RANGE 15mm 2Meter CABLE, with spex. Learn More