Roller Switch

CHERRY ELECTRICAL PRODUCTS - D41LR1RA - Switch, Roller.

Status: Discontinued

Circuit:  SPDT

Switch Function: On-Mom

Current Rating (Amps)   100mA (AC), 500mA (DC)

Voltage Rating – AC: 125 V

Voltage Rating – DC: 30 V

Actuator Type: Round (Pin Plunger)

Mounting Type: Chassis Mount

Termination Style: Quick Connect - 0.187" (4.7mm)

Features: Explosion Proof

Operating Force : 6gf Light Force

Operating Position: 0.560" (14.2mm)

Pretravel: 0.047" (1.2mm)

Differential Travel: 0.012" (0.3mm)

Overtravel: 0.051" (1.3mm)

Operating Temperature: -40°C ~ 85°C

Electrical Life: 6,000 Cycles

Contacts: SPDT.

Contact Plating: Gold

Actuator: Momentary. Very Light Force Required.

Connection: 3/16" Quick Connect or Solder Terminals.

Body: 38mm long x 28mm x 9.6mm.

Approvals: UL, CSA

Alternates: D419-R1AA-G2, V7-3E17D8, V15T22-CZ200

Learn More

CHERRY ELECTRICAL PRODUCTS - E62-46K Switch, micro, roller.

Contacts: SPDT.

Contact Ratings: 10.1Amp 125/250VAC, 1/4HP 125VAC.

Connection: PC leads.

Mech: PCB. Body: 19.8mm long x 6.3mm wide x 11.4mm high.

Overall with actuator 25.0mm wide.

Note: Miniature. Listed: UL/CSA.

Learn More

Cherry Electrical Products - E73-47KT Switch, Micro w/Roller Arm.

Contact Ratings: 0.1Amp 125VAC, Gold Cross-Point (5V logic) Contacts.

Actuator: Normally Closed Snap-Action.

Long Life Coil Spring Mechanism

High Temperature Thermoplastic Button, cove and Base.

Temperature Rating -40 to +85C

Hydrin Contact Boot

Macromelt Polyamide Potting

Stainless Steel Actuator

Connection: 2 Wire Leads 9.5" long.

Mech: Mounting Holes on about 5/8" centers.

Note: Only requires about 1/3" of movement for actuation.

Life at Rated Load = Min. 6000 operations

IP67 Water-Resistant and Weatherproof.

Specifications

Electrical Temperature Rating: -40°to +85°C

Flammability Rating: UL94V-O Materials

Case: Hi-Temp Thermoplastic Nylon

Boot: Hydrin

Button: HiTemp Thermoplastic Nylon

Actuator: Stainless Steel

Potting: Macromelt Polyamide

Contacts: Gold Crosspoint (E73)

Characteristics inches (mm)

Max. Rest Position: 1.041 (26.44)

Max. Pre-travel: 0.240 (6.10)

Operating Point: 0.762 ± 0.125 (19.36± 3.18)

Min. Over-travel: 0.125 (3.18)

Max. Movement Differential: 0.025 (0.635)

Max. Operating Force : 75 gms.

Learn More

C & K Components - 3TMA-4A Switch, Micro. with Roller.

SPDT NC/NC

15Amp 1/2HP 125, 250VAC/ 0.25Amp 250VDC/ 0.5Amp 125VDC/3Amp 125VAC.

Operating temperature: 67 Deg F to 302 deg F (55 Deg C to 150 Deg C).

Double marked: TMCJ4A.

Listed: UL/CSA.

Note: Cam Rotary.

New Old Stock

Learn More

LICON – 16-114 w/ Actuator 76-1290 - Roller Switch, Limit & Manual Reset, DPST, 10A, 125/250VAC. ITW Licon Series 16 Snap Action Switch utilizes the Butterfly action for high integrity switching in a compact size. The series 16 Snap Action switch utilizes the Butterfly™ action for high integrity switching in a compact size. Using the Form Z switch circuitry, this switch can be used to control two circuits. Sub-Miniature 10A Double-Break Snap Action switch with Manual Reset. Switch mechanism utilizing a single spring element to provide lost motion. Status: Discontinued Contacts: DPST-DB. Contact Material: Silver Thermoplastic Case and Cover. Contact Ratings: 10A AC/DC, 125/250VAC. Actuator: 76-1290 Two Positions, Switch Roller Lever Maintained. Connections: Four End Solder Terminals. Mechanical: Riveted on Small Plate. Environment: IP40 Meets MIL-PRF-8805/7 Operating Design Life: Electrical – 100,000 Cycles, Mechanical 10,000,000 Cycles Body: 0.25" Width x 1.16" Length x <1.0"H. Temperature: -54C to 125 C (-65F to 275F) Note: Has an unusual mechanical reset once roller/lever is pushed and snaps. UL Recognized and CSA Certified. Applications: Industrial, Military, Aerospace Used / Removed from Equipment. Learn More

Switch, micro w/roller. Contacts: SPDT (x2). Contact Ratings: 0.1Amp125VAC (0.01A {0.05A} 250VAC. Connection: male 3/16" QC terminals. Mech: panel. Panel hole: 27.9mm long x 20.5mm wide x 15.9mm high. Has two mount holes at 25.0mm centers. Roller extends 10.1mm to 10.2mm from switch. Note: Double wide (2 switches). Listed UL/CSA. Learn More

Switch, micro. With roller. Two (2) position, one NO, one NC, 10Amp 125/250VAC. Learn More

EATON CUTLER-HAMMER - SS12EV10-102L4 - Switch, Micro with Roller.

High Quality Snap Switch

Contacts: Normally Open

Current: 15A

Voltage:125/250VAC.

Made in USA

Learn More

Honeywell/Microswitch - V7-2B17D8-207 Switch, Micro, Roller.

Honeywell’s MICRO SWITCH™ V7 miniature switches are designed for long term-reliability in a rugged switch packaged with a thermoplastic housing. These switches may be installed in a wide range of applications from simple or precision on/off limits, presence/absence sensing, or embedded in pressure or temperature assemblies.

Contacts: SPDT.

Contact Ratings: 11Amp 125, 250, 277VAC 1/3HP (1/2Amp 125VDC, 1/4Amp 250VDC, L156 4Amp 125VAC).

Connection: (3) 0.187" Male QC Terminals.

Mech: Two Holes at 0.975".

Panel hole: 1.133" long x 0.396" wide x 0.623" high, plus terminals and roller/arm.

Basic Snap Action.

Maximum Operating Force: 0,44 N [21.6 oz].

Approvals: Certified with CSA, ENEC, and UL for global acceptability

Learn More