Rotary Switch

SWITCHCRAFT - 2523-304 Switch, rotary leaf.

3-Position Old telephone style with two form C, 6 connections, Complete with knob.

Contacts: precious metal.

Dimensions: overall 4-1/4" long.

Three positions (Arrow-Left45deg/Arrow-Vertical/Arrow-Right90deg)

Contacts Pair Action: 1-2 (X-O-O); 2-3 (O-X-X); 4-5 (O-X-O); 5-6 (O-O-X).O=Open, X=Closed.

Learn More

Switch, rotary. Contacts: SPDT. Contact Ratings: 125mA@28V. Mech: 0.25" threaded bushing and gold plated leads. Note: 0.7" with leads x 0.51" square x 0.46" behind panel - 0.123" 3.1mm D shaft, half flat, nice, x 0.8"long. Precision rotary/Non-shorting. Learn More

Switch, rotary BCD. Contacts: 1P Dual 0-9. Mech: PCB 5 pins each. Panel hole: 1.591" long x 0.771" wide x 0.427" high, plus rotary actuator. More info: http://www.eecoswitch.com/product/2100-series/

Learn More

CTS - 1080-124B Rotary Switch, Series 227, SPDT, 1P2T. 

Series 227 Features:

Hill and valley detent.

Enclosed diecast detent plate

Printed circuit terminals

Molded stator prevents solder from flowing into the circuit.

SPDT, 1P2T.

Indexing: Double bump spring hill and valley detent with 30° indexing

Voltage and Contact Rating UL Rating: 3/4 amp at 125 VAC

Contact Resistance .015 ohm max. when measured from adjacent terminals

Stop Strength: 15 in-lb (17.3 Kgf-cm)

Detent Rotational Life 25,000 cycles

Materials Shaft: Aluminum, Bushing: Zinc diecast, Detent Spring: Stainless steel, Detent Plate: Zinc diecast

Rotor Contacts, Stator Contacts and Terminals: Silver plated brass standard

Stator Insulator: Glass reinforced thermoset material

Shaft Trim: Plain round with flat. 

Custom order for a specific company.

Cross: CTS P/N #04473.

RoHS Compliant

 

Learn More

C & K Components - 3-374 - Switch, Rotary.

Contacts: 2P 3 Position.

Contact Ratings: 12Amp 125VAC, 6A 250VAC, 1A 125VDC.

Note: Bushing: 3/8: threaded.

H Series.

Note: The nature of the switch is inherently non-shorting and operates according to the table below. It cannot emulate the identical operation of a 2-wiper, 3-position switch. This design was necessary to achieve the current ratings of the switch. Pair

LeftCenterRight 1-2 Open Open Closed 1-8OpenClosed Open 7-8ClosedOpenOpen 3-4ClosedOpenOpen 4-5OpenClosedOpen 5-6OpenOpenClosed

Similar to R20307RN02Q

Learn More

Challenger Canopy Switch, Contacts: SPST. Contact Ratings: 3Amps 125VAC( 2Amp 125VT, 1Amp 250V, 3Amp 125V).  Connection: (2) 6 inch leads. Mech: Panel, threaded bushing. Body: 0.9" x 0.79" x 0.30" high, plus bushing 0.660" seated.

Great for Lamp 0n - Lamp Off.

 

 

Learn More

C & K Components - R102-05-RR-01-Q - USAR SERIES ROTA-SLIDE Switch, Rotary.

C&K’s R series Rota-Slide® rotary switches are often found in industrial equipment, portable tools and ceiling fans. The R series are known for being high-quality, long lasting switches that feature positive detent, multi-pole and multi-position capabilities and panel or PCB mounting.

Contacts: DPST.

Contact and Terminal Material: Copper with Silver Plating.

Contact Ratings: 5Amp 125VAC, 2.5A 250VAC, 0.5A 125VDC.

Actuator: 2 Position.

Connection: Male 1/8" QC or Solder lug with Notch.

Mech: Panel Mount with anti-rotation tab.

Panel Hole: 0.385" (9.7mm)

Overall 0.920" (23.3mm) Diameter x 1.06 (26.9) mm minus connection terminals.

Threaded Bushing: 0.275" (7.0mm) Long with Flat shaft protruding 0.363" (9.25mm).

Shaft: 0.162" (4.1mm) 1/2 Flat "D" cut.

Electrical Life: 10,000 Make and break Cycles at Full Load.

Note: USAR Series.

Listed: UL/CSA.

Learn More

C & K Components - A30414NZQ Switch, Rotary.

3-Pole, 4-Position sequence repeated 3 times in 12 rotary positions.

2.5A @ 125V

Contact Material: Silver

Mount: Panel Mount

Termination: Solder Lug

Shaft: 1.500" High Flattened

Non-Shorting Contacts.

Wiper A connects to 1-2-3-4,

Wiper B connects to 5-6-7-8

Wiper C connects to 9-10-11-12.

New Old Stock

Learn More

Power Switch, Rotary. Contacts: 2P 4 Position. Contact Ratings: 12Amp 125VAC, 6A 250VAC, 1A 125VDC. Connection: solder hook terminals. Mech: Single hole mount 3/8" threaded bushing. Note: Mechanical stops.

Learn More

Switch, Rotary,

ON/OFF sealed deck,

Silver plated contacts.

For more options, view our selection of rotary power switches.

Learn More

Switch, Rotary.

Contacts: 2 Deck 3 Pole ( 2 Position).

Note: Two Tier.

New Old Stock

Learn More

CTS - 3-234 Switch, Rotary.

Contacts: 2-Pole 3-Position.

Connection: SilverSolder Terminals.

Mech: 0.25"D threaded bushing 0.35"L.

Body: 1.0"D x 0.6" behind panel.

Shaft: 0.125"D shaft 0.4"L.

High Quality Rotary Switch

Vintage New Old Stock

Silver contacts starting to tarnish that does not affect operation. 

Learn More

CTS - 3464565-1 - Switch, Rotary.

1 pole 11 position, 2 sets of 5 positions.

Type: Hill and valley detent

Connections: Solder Lug

Unusual Pattern.

Vintage - New Old Stock 

Learn More

GRAYHILL - 94HAB10RA Switch, Dip, Rotary.

Contacts. 10 Position 0-9 BCD.

Contact Ratings: 100mA at 50VDC.

Actuator: Flush.

Mount: 6 Pin Right Angle

Life: 10,000 Cycles

More info: http://www.grayhill.com/web1/images/ProductImages/DIP_Series_94H.pdf

Alternate: Omron A6A-10CS

Learn More

Switch, rotary. Coded. BCD. 10 Position, 20VAC/VDC 0.4VA. Mount: PCB. Package: 6 Dip, 0.318" (8mm) square. Lead spacing: 0.1" Learn More

Switch, rotary. 3-Pole 4-Position 3-Wafer.

PCB Mount

New Old Stock

Learn More

Switch, rotary. Contacts: 1P 4 Position. Elect config: non-shorting. Mech: Panel, for 0.375" D hole. Mounting collar: 0.25" long. Body: Overall approximately 1" D. Behind panel: 0.875". Note: Shaft: 0.125" D x 0.3125" long. Blue plastic deck. 30 Degrees between rotary positions. Learn More

GRAYHILL - 94HAB08WR Switch, DIP, Rotary.

Actuator: 0 - 7 (8 Position).

Elect Config: 6 leads.

Mech: Octal SMD.

Body: Approximately 1/4" square face.

From: Manufactures T/R.

More info: http://www.grayhill.com/web1/images/ProductImages/DIP_Series_94H.pdf

Learn More

Switch, rotary. Wafer only for 1P 2-5 Position PA10 rotary switches. Learn More

Switch, rotary. BCD 10 position, 0.4VA at 20VAC or 20VDC maximum. Mount: PCB RA 6 pin dip, with extended screw driver slot. Learn More

CUSTOM - 8-629 - 1/4" Nylon Shaft Extenders, Attenuator Shaft Extension.

Fits 1/4" ID "D" Shape (Half Round) Shaft,

Durable Nylon Extender is Approximately 3" long.

Provides 2.5" Extension. 

Universal Audio or Industrial Applications. 

Great for Recessed Potentiometers, Rotary Switches, Thermostates.

Vintage - New Old Stock - Difficult to Find Hardware

Learn More

OAK INDUSTRIES - 3-239

1 Pole 12 Position Rotary switch

New Old Stock - Tarnished Silver Contact do not affect operaton.Proudly Made in USA

Learn More