Rotary Switch

GEMCO - 404S21121YAA1 - Stock One Switch, Rotary.

Commercial Industrial Quality Switch

Contacts: 1P2T.

Maximum Voltage: 300

Actuator: Momentary.

Mechanical: Panel, 4 Contacts.

Mounts in a 0.85" hole, complete with 4 metal washers, one cork and one locating pin.

Note: Selector switch with adjustable cam.

Each Switch consists of End Plate, Cover, One Contact Block, Deten Mechanism, Operator, and Switch Body.

Genuine Vintage GEMCO - New Old Stock

In Manufactures Original Packaging with Instruction Sheet.

Alternate: GE 404S21121YAA1, 625896-18

Proudly Made in USA

Learn More

GEMCO - 404S32121YAA3 - Stock One Switch, Rotary.

Commercial Industrial Quality Switch

Contacts: 1P3T.

Maximum Voltage: 300

Actuator: Momentary each side.

Mechanical: Panel, 4 contacts.

Mounts in a 0.85" hole, complete with 4 metal washers, one cork and one locating pin.

Note: Selector switch with adjustable cam.

Each Switch consists of End Plate, Cover, One Contact Block, Deten Mechanism, Operator, and Switch Body.

Genine Vintage GEMCO - New Old Stock

In Manufactures Original Packaging with Instruction Sheet.

Alternate: GE 404S32121YAA3, 625896-18

Proudly Made in USA

Learn More

Centralab - PA-2041 - Switch, rotary.

8PDT (2 Position).

Actuator: On-On. Non-Shorting.

Mech: Bushing, adjustable stop plate.

Body: 1.5" OD x 4.25" long including 2" long 1/4" shaft .

Note: Three ceramic wafer (3 deck).

Steatite. NIB with knob.

New Old Stock

Learn More

Switch, rotary. 3-Position Center-Off Momentary-both-sides Selector Switch, appears to have Two SPDT contacts. Black handle with white stripe. 1.25" square x 3-3/8"L - new Learn More

ARROW HART & HART - 3-261

5 POLE 8 POSITION FLOATING COMMON

10A 125V/5A 125V

ROTARY SWITCH. With hardware.

Learn More

Switch, rotary. Contacts: 3 Position, 2 NO. Actuator: Black knob. Note: Pilot devices. Shiny metal bezel. Learn More

Switch, rotary. Contacts: DP 3Pos. Connection: solder terminals. Elect config: Non-shorting. Mech: Enclosed. Body: 1.5" D. Bushing Length: 0.3750". Shaft Length: 0.500". Note: Electrical Current and Voltage Rating: Make and Break Resistive Load 0.5 amp @ 28 VDC; 0.3 amp @ 125 VAC. Current Carrying Capacity: 15 amps. Dielectric Strength: 1000 VAC between current carrying parts and ground. Contact Resistance: Average initial 3 milliohms. Insulation Resistance: In excess of 10,000 megohms. Insulation: Diallyl Phthalate. Index Angle: 30 degrees. Flat Angle: 195 degrees. Learn More

Switch, rotary. 2 Position 1NO 1NC, 115VAC 0.15Amp. Selector switch. Series A, 800MS-HX2B. Without switch top, but with actuator. Complete with manufactures instructions. NIB.

Learn More

Switch, rotary. Contacts: 2 Deck. 2Pole/Deck. 5 Position/pole. Connection: solder terminals. Mech: single hole bushing mount. Note: 36 Degree. Non-shorting. Threaded bushing length:0.304" max. Shaft: 1/8" D half flattened shaft. More info: http://www.grayhill.com/web1/images/ProductImages/Rotary_71.pdf Learn More

RES France - HK122 - Switch, Precision Rotary.

Contacts: 4 Position. With each turn of the shaft it connects one set of the opposite side of switch contacts, then breaks for the next and so on. There is also two sets of mounting pins which look like the switch contact pins on the first 2 positions of the switch body for mounting to a pc board.

Mech: PC, 12 Dip. Body

Mount: PCB 

Contact & Leads: Gold Plated

Body: 1.22" Long x 0.415" Square with an additional 0.33" Long Contact Leads.

Plus Shaft:  (3mm X 255mm) 1.20" D x 1".

The contact spacings are 0.100"  (2.54mm) on center side by side and approximately 0.4" on center across from each other.

The contact spacings are 0.100" (2.54mm) on center side by side and approximately 0.4" on center across from each other.

Shipped with Removable Lead Protector

Application: Gould Instruments

Made in France

Learn More

GRAYHILL - 24001-10N Switch, rotary.

Single deck. 10 Position.

Contacts: 10 solder lug.

Mount: Panel or PCB.

Dimensions: 0.939" (23.8mm) D, 0.580" behind panel.

 

Learn More