Special Switch

Honeywell/Micro Switch - 104TL226-5 Switch, Toggle.

4PDT (Mom) On/None/Off.

125VAC 7.5Amp/250VAC 6Amp.

Resistive DC: 125V 0.75Amp/250V 0.5Amp/28VDC 7.5Amp.

Inductive load: 125VAC 7.5Amp/28VDC 7.5Amp.

Termination IWTS (16-20AWG) MIL-S-3950.

Threaded bushing length: 0.432".

Actuator length: 0.643".

Operating temperature: -85 to 160 Deg F.

Terminals accept pins M39029/1-101, not included.

Note: Military. Environmentally sealed shaft.

Learn More

Three phase 60Hz enclosed variable frequency drive bypass system. Inverter Bypass With Overload Protection. 200/208 = 7 1/2HP / 240V = 10HP / 480V = 20HP / 600V = 20HP OVERLOAD AMP RANGE = 22-27 AMPS - Learn More

Switches, Proximity. Demonstration Kit containing 15 items from the E51 switch line. Rugged construction is ideal for industrial environments. Viton� gaskets ensure a positive seal and high resistance to industry chemicals. Direct replacement for worn out limit switches. Sensor heads and bodies feature captive screws to eliminate loss. All sensor heads include a selector switch to program output function to either N.O. or N.C. Sensor bodies feature bifurcated engagement prongs for a reliable connection when plugging into receptacle stabs. Sensors accommodate both U.S. and DIN mounting dimensions. Wiring terminals feature captive pressure plate saddles for #18 to #12 AWG wire. Logic modules are available to provide additional control function. Case contains: E51SAL, E51DT1, E51RA. E51SAL, E51DS1, E51RAP3. E51RN. E51SNL. E51SPL. E51DS1. E52RAL12T111. E51DS6. E51DT5. E51DT7. E51DT8.

Learn More

Switch, rotary. Contacts: 6PDT, Iridium. Actuator: Side-mounted 1/4" shaft. Elect config: non-shorting. Body: approx 4.5"L x 2.8" x 1.3" . Panel hole: 3/8" threaded bushing. Note: Two-position, maintained. Very heavy duty Learn More

Cutler-Hammer / Eaton - CH Switch Salesman Sample Kit

Large Assotment of High-Eend Industrial Switches incliusive of Key, Rotary, Pushbutton, Limit, & Special Switches. 

23-piece Switch assortment kit used by Cutler Hammer salesmen.

24 pc counting the Attractive Black Carrying Case.

Proudly Made in USA

Learn More

E Learn More

ELECTRONIC CONTROLS INC - 801-12C/12 - Power Relay, 12PDT-1Amp

The 800 series Dust-Tight Relay is protected against normal ambient dust conditions. It is designed for use in controlled environment such as test areas and network management centres. It is used for control interlock and indicator circuits. The connectors are a vital part of T-Bar switching technology. While T-Bar Connectors are recommended, all terminals of T-Bar relays and switches are solderable.

Product Range: 800 Series

Coil: 12VDC "T-BAR"

Coil Resistance: 49.1-Ohm

Mount: Panel

Switch/Relay Plug-In Relay

1/8" QC Terminals

Double marked C8501-011-2

Applications: Industrial, Computers & Computer Peripherals, Communications & Networking, or Machinear.

Alternate: Manufactured by OLYMPIC CONTROLS

Made in USA - New Old Stock

Learn More

Disconnect switch operator. Flange Switch Instr. DSFHN-HS12 and the OT100E3 (1SCA022398R4400) GP Switch/Interrupteur, 3P 3PH 100A 600V. Note: Alt P/N: 662019001135. Listed: UL/CSA. Learn More

EMERGENCY Cable Pull Switch: Latching Contact - reset by standard pushbutton on the side. Length of protected area: 165feet / 50meter cable. Right Cable Mount. 2NO and 2NC 10Amp - 10,000-operations. NEMA1,2,4,13. IU:400V Ulmp:4kV AC15 240V-3A CE Learn More

Safety switch. 3P 200Amp 600VAC/VDC 3 Wire. Type VBII NEMA Type 3R Enclosure. Non-Fused. Learn More

Safety switch. 3P 60Amp 600VAC/VDC 3 Wire. Type VBII NEMA Type 1 Enclosure. Non-Fused. Learn More

Safety switch. 3P 30Amp 600VAC/250VDC 3 wire. Type VBII NEMA Type 3R Enclosure. Non-Fused. Learn More

Jennings Technology - RP233BN748 - High Voltage Ceramic Hermetically Sealed Switch/Contactor.

Vacuum interrupter switches have demonstrated superior performance for RF applications, such as:
• Band switching of transmitters
• Switching of filter sections and antenna multicouplers
• Antenna reflector switching
• Tap changing of RF coils in induction and dielectric heating RF generators
• Switching of transmission lines

Operating Voltage: 25,000 V

Contious rated current: 35A RMS @ 32 MHz

Contact force at separation: 2 lbs. 8 Oz

Mechanical Life: 1.5 Million Cycles

Actuator Style: Round

Actuator Diameter: 0.600 inches

Enclosure Type: Hermetically sealed

Features Provided: Actuator seal

Thread Qty Per Inch (tpi): 16

Thread Size: 0.750 inches

Contact Arrangement: 1 pole, single throw, normally closed, momentary action single switch unit

Contact Load Current Rating at Maximum Rated Voltage: 35 Amperes resistive AC

Dimensions: 1.31" Diameter, 4.18" Body Length, Total Length 5.68". Stroke Contact: 0.120" 

Federal Supply Class (FSC): Switches

National Stock Number (NSN): 5930-00-460-2698

Minor discoloration/rust. New Old Stock

Learn More

Three phase 60Hz enclosed variable frequency drive bypass system. 200/208 = 5 HP / 240V = 7-1/2 HP / 480V = 15 HP / 600V = 15 HP OVERLOAD AMP RANGE = 15-22 AMPS - IN A WEATHERPROOF ENC. Learn More

Three phase 60Hz enclosed variable frequency drive bypass system. 200/208 = 2 HP / 240V = 3 HP / 480V = 5 HP / 600V = 7-1/2 HP OVERLOAD AMP RANGE = 6.3-10 AMPS -IN A WHEATHERPROOF ENC. Learn More

MICRO SWITCH - 20FR1-6 - NEW REED SWITCH SP

Magnetic Reed Sensor Magnetic Field Sensing

N.C. 500V 1.5A 20W

16-Ga

Hermetically Enclosed

Wire Leads

New Old Stock - With Box and Mounting Brackets  

Proudly Made in USA

Learn More

MICRO SWITCH - 20FR5-6 - NEW REED SWITCH SP

Magnetic Reed Sensor Magnetic Field Sensing

N.C. 500V 1.5A 20W

16-Ga

Hermetically Enclosed

Wire Leads

New Old Stock - No Box or Mounting Brackets  

Proudly Made in USA

Learn More

MICRO SWITCH - 20FR1-6B - NEW REED SWITCH SP

Magnetic Reed Sensor Magnetic Field Sensing

N.O.400V 1A 15W

16-Ga

Hermetically Enclosed

Wire Leads

Proudly Made in USA

Learn More

Gems Sensors - ELS-1100 138167 Electro-Optic Sensor, Liquid Level Switch. 

ELS-1100 Series Single-Point Level Switch is a compact, economical, no moving parts polysulfone level sensor with built-in switching electronics. A variety of mountings, power requirements and electrical terminations are available. These level switch units are suitable for high, low or intermediate level detection. Installation is simple and quick through the tank top, bottom or side. The sensor offers ±1 mm repeatability and broad liquid compatibility. They are not recommended for use in any liquid that crystallizes or leaves a solid residue.

General Purpose  & Economically Priced

5VDC Supply.

Output: TTL/CMOS Compatible. Open Collector Output May Sink 40 mA UP TO 30 VDC.

Probe Wet-Sink.

Material Construction: Polysulfone or Nylon Housing and Prism

3 Wire, 1/4" NPT Mounting.

Operating Pressure: 0 to 150 PSI

Operating Temperature: 0 F to 176 F

Lead Wires, 22 AWG, PVC Jacketed

EMI Susceptibility: Meets (MIL-STD-461B Part 2 Modified) Specification of 10 V/M for Frequency Range 30 to 1000 MHz

UL Recognized

Additional information: https://www.gemssensors.com/search-products/product-details/els-1100-single-point-level-switch-138167

New - Proudly Made in USA

Package of 2 (Note: Typically sold in singles, but our sale is two Sensors per box at price of 1).

Learn More