Special Switch

T-BAR - 902-108C - 108-POLE T-BAR SWITCH NEW

Olympic Controls - 108 Pole Double Throw

3-ganged 36-Pole Switches may be unconnected and used independently.

The 902 series is desinged to switch dry circuits to a maximum 1 amp for use in data. Thermocouple and instrumentations circuits. Terminals are designed to accept T-Bar Connectors or solder holes provided. Protected again normal ambient dust conditions. Designed for use in controlled enviroment such as test areas, computer control rooms, broadcast studios and network management centers.

Connections: Quick Connect

Dimensions: 3.5"L x 2.5"H x 1.4" behind panel, requires three 0.5" mounting holes

Weight:  0.75-lb

New Old Stock 

Made in USA

Learn More

Switch, stepping. Type 44 Switch, 3-deck, 11-position, 1-deck, 10 position, non-shorting wipers, 2 of the 4 decks gold-plated; SPDT interupter contact, 120 ohm coil; will operate switch at 36VDC but rated for 48VDC. In Original Styrofoam box. Learn More

Three phase 60Hz enclosed variable frequency drive bypass system. Inverter Bypass With Overload Protection. 200/208 = 7 1/2HP / 240V = 10HP / 480V = 20HP / 600V = 20HP OVERLOAD AMP RANGE = 22-27 AMPS - Learn More

Square D - H363 - Heavy Duty Safety Switch. 3P 100Amp 600VAC.

Square D Safety Switch, Heavy Duty Fusible

600 VAC/VDC, 100 A, 30 hp, 50 hp, 3 ph, 3 Pole, 3 Wires

10/200 kA Short Circuit Current

TPST, Handle Actuator,

NEMA 1, Surface Mount, Lug Terminal

Dimensions: 10.5 in W x 6.38 in D x 21.25 in H, Steel.

New

Learn More

Safety switch. 3P 200Amp 600VAC/VDC 3 Wire. Type VBII NEMA Type 3R Enclosure. Non-Fused. Learn More

Safety switch. 3P 100Amp 600VAC/VDC 4 Wire. Type VBII NEMA Type 3R Enclosure. Class H, J, K, R or T fuses. Learn More

Jennings Technology - RP233BN748 - High Voltage Ceramic Hermetically Sealed Switch/Contactor.

Vacuum interrupter switches have demonstrated superior performance for RF applications, such as:
• Band switching of transmitters
• Switching of filter sections and antenna multicouplers
• Antenna reflector switching
• Tap changing of RF coils in induction and dielectric heating RF generators
• Switching of transmission lines

Operating Voltage: 25,000 V

Contious rated current: 35A RMS @ 32 MHz

Contact force at separation: 2 lbs. 8 Oz

Mechanical Life: 1.5 Million Cycles

Actuator Style: Round

Actuator Diameter: 0.600 inches

Enclosure Type: Hermetically sealed

Features Provided: Actuator seal

Thread Qty Per Inch (tpi): 16

Thread Size: 0.750 inches

Contact Arrangement: 1 pole, single throw, normally closed, momentary action single switch unit

Contact Load Current Rating at Maximum Rated Voltage: 35 Amperes resistive AC

Dimensions: 1.31" Diameter, 4.18" Body Length, Total Length 5.68". Stroke Contact: 0.120" 

Federal Supply Class (FSC): Switches

National Stock Number (NSN): 5930-00-460-2698

Minor discoloration/rust. New Old Stock

Learn More

General Electric - TH3361J - Heavy Duty Safety Switch.

Designed for commercial and industrial applications where safety, high performance and continuity of service are essential. Listed to UL standard 98 enclosed and dead front switches. Suitable for use as service equipment when installed in accordance with the National Electrical Code. Certified to CSA standard 22.2 no. 4-04 enclosed and dead front switches. Meets or exceeds NEMA KS1 standard for enclosed switches, type HD. Fusible and non-fusible switches available (consult BuyLog for interrupt ratings). Quick-make, quick-break mechanism. 60/75 C conductor rating. Full cover interlocks. 

3P 30Amp 600VAC.

Fusible.

UPC 78316408707

New Old Stock

Learn More

Three phase 60Hz enclosed variable frequency drive bypass system. 200/208 = 5 HP / 240V = 7-1/2 HP / 480V = 15 HP / 600V = 15 HP OVERLOAD AMP RANGE = 15-22 AMPS - IN A WEATHERPROOF ENC. Learn More

Switch, Bidirectional Stepping, Direct Drive, 6 Pole 25 Position. Shorting Contacts, Stepping Coils: 12 VDC (9-Ohm requires use of current-limiting resistor in stepped position for pulses over 20 milliseconds long} Interrupting contacts and end-of-travel contacts for each direction.: P57283 BSS 156. Dimensions: 146mm x 138mm x 66mm. Manufactured in England for Imtra Corp, Mass. In factory box. Learn More