Special Switch

Honeywell/Microswitch - AS419A1 Switch, tilt.

Can handle 1 amp at 30 VAC/VDC for resistive load, 0.75amp for inductive load where differential angle between on and off positions is 5 deg. For larger differential angle of 10 deg., switch can handle 0.5 amp resistive at 110 vac. or 0.75 amps at 110 VDC.

Miniature Mercury Tilt Switch.

Package: Glass Envelope with 6" wire leads.

Dimensions: 0.175" OD x 0.9" long.

***PURCHASER AGREES TO HANDLE WITH CARE AND ACCEPT ALL LIABILITY. GLASS IS BREAKABLE AND Hg contact IS VERY DANGEROUS***

Genune Honeywell / Microswitch - New Old Stock - Rare

NSN: 5930-21-801-9024

Learn More

HEDLAND - 526-002-DCR - DC Flow-Alert Flow Limit Switch, 1A @ 24VDC

This is the Flow Limit Switch for EZ-VIEW FLOW METERS (Not Supplied) - using Hall Effect-triggered (Normally Open) Relay hermetically sealed in encapsulating compound, within Polysulfone module. The Relay, when Activated, is designed to directly control warning lights, alarms or digital inputs. WHEN CONNECTED TO THE FLOW METER (NOT SUPPLIED) The Set Point is: 0 - 100% of full scale 1-1/4" ID for Flowmeter

Supply Voltage: 9-24 VDC

Supply Currrent: 90 mA

Contact Rating: 1A @ 24VDC

Set Point: 0-100% of Full Scale

Operating Temperature: 32-158F

Includes Installation Instructions

Factory New

Learn More

General Electric - ASP3127-49

Status: Discontinued

Switch, Pushbutton, Heater Control.

Contact Ratings: 17Amp 120-240VAC, 1-1/8HP 120VAC, 2HP-240VAC.

Actuator: Off / Low / High.

Connection: 3 Male 1/4" Quick Connect Terminals.

Mech: Panel Mount with 1.6" Centers.

Body: 2.002" long x 1.196" wide x 1.189" high.

Note: All Cancelling.

New Old Stock

Approvals: UL, CSA

Proudly Made in the USA.

Learn More

Contact block for switch. One NC 10Amp 500VAC (250VDC 0.25A, 125VDC 0.5A). Slow make switching element. Screw terminal. Listed: CSA/UL 827E. Red Learn More

Industrial Cutler-Hammer / Eaton - 8130K20J15V51, DPDT On/Off/On, Center-Off, Motor Reversing Toggle Switch (Already Cross Strapped) Permits usage for Polarity Reversing Motor. Alternate 8951159

White Rocker Identified FWD & REV, 6A-125VAC, 3Amp 250VAC, 2A-277VAC

Six (6) 1/4" Quick Connect Male Tabs, Dimension: 1.45" wide x 1.33" x 1.16"

Panel Mount Fits standard .83 x 1.48 Inch Rectangular opening. Switch secured by included snap-on bezel. 

Very handy item to have around the shop if you are DYI type. Used for all sorts of DC motor reversing applications such as camper trailer jacks, winch controls for in/out operation, door open closed, liftgate up/down, boat navigation and anchor or Automotive Motor Control.

This switch can be used when you want to feed (2) loads from 1 or 2 sources. This switch may also be used as a SPDT switch by simply not using 3 of the terminals.

Made with Pride in USA

 

 

 

Learn More

Cherry Electrical Products - E73-47KT Switch, Micro w/Roller Arm.

Contact Ratings: 0.1Amp 125VAC, Gold Cross-Point (5V logic) Contacts.

Actuator: Normally Closed Snap-Action.

Long Life Coil Spring Mechanism

High Temperature Thermoplastic Button, cove and Base.

Temperature Rating -40 to +85C

Hydrin Contact Boot

Macromelt Polyamide Potting

Stainless Steel Actuator

Connection: 2 Wire Leads 9.5" long.

Mech: Mounting Holes on about 5/8" centers.

Note: Only requires about 1/3" of movement for actuation.

Life at Rated Load = Min. 6000 operations

IP67 Water-Resistant and Weatherproof.

Specifications

Electrical Temperature Rating: -40°to +85°C

Flammability Rating: UL94V-O Materials

Case: Hi-Temp Thermoplastic Nylon

Boot: Hydrin

Button: HiTemp Thermoplastic Nylon

Actuator: Stainless Steel

Potting: Macromelt Polyamide

Contacts: Gold Crosspoint (E73)

Characteristics inches (mm)

Max. Rest Position: 1.041 (26.44)

Max. Pre-travel: 0.240 (6.10)

Operating Point: 0.762 ± 0.125 (19.36± 3.18)

Min. Over-travel: 0.125 (3.18)

Max. Movement Differential: 0.025 (0.635)

Max. Operating Force : 75 gms.

Learn More

Honeywell Microswitch - 922SA2XP-C4N-l-L Sensor, Hall Effect.

Micro Commercial Components

Solid State Design with LED Indicator.

Detects most metals with nominal sensing distance of 5mm depending upon metal.

Nominal Sening Distance: 5mm

Operates 5.0 to 30 VDCMaximum Load current: 200mA

Normally Open Contact  

Magnetic. 4 Wire.

Dimensions: 0.5" OD x 1.5" long (12mm Diameter X 36mmLong)

Treads have 1mm pitch with nut.

3/32" Quick Connects 

Made in Switzerland.

NSN 5930-01-000-8864.

New Old Stock

Learn More

Eaton - Cutler-Hammer - AN3023-9 - 8713K14 Switch, Toggle.

Contacts: DPST.

Contact Ratings: 20Amp.

Actuator: On-Off(Mom).

Normally Closed.

Connection: Screw Terminals.

Mech: Panel with 2 holes 1.85" centers.

Body: Flange 2.123" long x 1.262" wide x 0.046" thick.

Overall 2.123" long x 1.5" wide x 0.953" high plus contacts.

Note: Double marked AN3023-9 and ST55L.

NSN: 5930-00-548-5328

Genuine Vintage Cutler Hammer - New Old Stock

Made in the USA.

Learn More

Switchbank-in-a-Box ! 4-gang push button switch bank. Push one inand you cancel the others. All 4 Switches are DPDT-3Amp Leaf Switches by Switchcraft. Mounted in a nice new aluminum box 4.2"W x 2.1"H x 6"D Terminated in a DB-25P(APP. 4.25"wide x 5"deep x 2"high. ) with a male DB-25 Connector on back. Learn More

Schurter SWM1 Rotary Impedeance Selectro Switch. 

Contacts: 1P3T (One pole 3 position) A-B-C.

Contact Ratings: 10Amp 250VAC/6.3Amp 250VAC. IP40

Connection: Solder Terminals.

Contact resistance <10 mOhm at 20 mV 

Mount: Screw-on mounting

Material: Thermosplastic, Black ULV-0

Mech: Panel, single hole 0.777" (19.7mm) D, threaded.

Panel hole: 24.5mm D x 2.1mm in front of panel.

Note: Coin Operated, Flush.

Approvals: VDE, UL, CE, IEC, CSAReach

Alternates: P-H1701, CED-P-1701, 0033.40XX

applications: Serieo equipment, Speakers, Voltage Selector, Impedeance Selector, 

Replacement Impedance Selector Switch fits the following models: Deliverance One Twenty Head,

Deliverance Sixty Head & Combo, Pittbull Ultra-Lead & One Hundred, Pittbull Hundred/CL, Hundred/CLX,

Pittbull Classic Head & Combo, Pittbull Fifty/CL, Pittbull Fifty/ST Head & Fifty/Twelve Combo,

Pittbull Forty-Five Head and Combo, Pittbull Super Thirty Combo, Two/Ninety/Two Power Amp,

Two/Fifty/Two Power Amp, Twenty One Hundred and Classic Power Amp, 2150 Power Amp

Learn More

NURSE CALL STATION SWITCH WITH RECESSED BUTTON & A RED & WHITE IND. LIGHT. MALE 7 PIN DIN CONN. ON END OF A 6' 7COND. WHITE CABLE.the switch is a spst n.open. there is also a 2"speaker in the case Learn More

MAXI-SWITCH - 5 Station Bank Assembly.

Maxi Switch Push Button Switchbank, 5 Station/Position Assembly, SPDT with Electro-Mech Lock to prevent accidental change. Self cancelling. Self cancelling, 5Amp 250VAC with Plus Magnecraft 24VDC Solenoid lock. Five numbered Push Buttons.

The Assembly consists of the following major parts. Component parts value exceeds $100.

Five Honeywell/AMP or equivalent 311SM4-T Subminiature snap-action switches, Mechanical life 1,000,000 Cycles, 5A Switches 250VAC, 30VDC, SPST Roller Lever, Contact Material Gold plated Silver, 638X6.4X14.5mm, -55C to 125C, CSA, UL RoHS Compiant, Max Operating Force:0.39N; Series:SM; Switch Case:Phenolic

One AMP/TE Connectivity 201355-1 M-Series, Male Connector Housing, Phenolic-GF, 3.81mm, 14 way, 3 row connector. Cable Mount, For use with Female Block 201298-1

One Magnecraft Relay Solenoid 11-X-609, 280 Ohm, USD 2400317

Used/RFE/Removed from equipment - Excellent condition.

Old Overstock Assembly containing many difficult to find components.

Over 400 Sold.

Learn More

Honeywell/Microswitch - PTY2091 - PUSH / PULL 2-Position Maintained Switch Assembly Model-B

2 Position Maintained Contacts

Industrial, Full Voltage

Applications: Safety Emergency Stop/Start Switch

In Manufactures Packaging with Installation Instructions

UL CSA Approved

Note: Lens Cap Purchased Separately

Alternates: Senasys PTY2091, ITT G330207-1, NSN 5930-01-244-0512

Proudly Made in USA

Learn More

FORD - 3-022 - Switch, Toggle.

Contacts: 4 Position (3 Position Plus Off).

Connection: 4 Wire, 6".

Mech: Panel.

Body: 34.6mm long x 19.1mm wide behind Panel.

Heavy Duty Bracket & 4 Pin Connector

Above panel 36.4mm long x 20.2mm wide x 45.5mm high (including actuator).

Note: Blower Motor Switch.

Genuine Ford - New Old Stock - Vinatage

Learn More

Switch, trigger. Contacts: DPST. Contact Ratings: 16Amp 125VAC/8Amp 250VAC. Actuator: Locking. Connection: screw terminals. Body Dim: 1.817" long x 0.824" wide x 0.6" behind panel. Overall with actuator locked 1.623" high. Mech: Panel. Note: Metal actuator. Learn More

Panasonic  Matsushita - ABJ1610609 - Turquoise Switch, Micro, Snap action Pushbutton.

Ultra Miniature

Contacts: SPDT Pin Plunger.

Contact Ratings: 2Amp 125VAC.

Contact Material: AgNi Alloy

Connection: 3 Wire Leads 11" long.

Mech: PCB or Panel.

Operating Force: 1.96 N

Mounting Hole: 1.2mm

Operating Temperature: -40 C to 85 C

Dimensioons: (13.9mm) wide x (6.5mm) (8.2mm) high. (See Attached Pictures)

IP67 Weather Resistant - Dust Tight - Waterprrof - Environmental Sealed.

Life: 1,000,000 Cycles

Listed UL/CSA.

Applications: Industrial use video jack, Automotive (ex. Device for opening and shutting of automobile doors), Based on the protective construction classification of IEC, items which satisfy the test requirements are denoted with an IP designation.

Learn More

Panasonic Matsushita - ABS1610409 Switch, Push Button, Sub-Miniature (Round Pin Plunger).

Ultra Miniature

Immersion Protected Type

Contacts: SPDT, Pin Plunger

Contact Ratings: 2Amp 250VAC.

Contact Material: AgNi Alloy

Connection: 3 Wire Leads 11" long.

Actuator: On-(Mom).

Operating Force: 0.98 N

Connection: 3 Wire Leads.

Mech: Chassis.

Operating Temperature: -40 C to 85 C

Body: 21.1mm long x 6.1mm wide x 16.9mm high plus pin/plunger.

IP67 Weather Resistant - Dust Tight - Waterprrof - Environmental Sealed.

Life: 1,000,000 Cycles

Listed: UL/CSA.

 

Learn More

Switch. Rotary contact block/ housing only. No actuator. NIB, with manufactures installation sheet. Learn More

MDI - GB20W1000 Mechanical Tether Float Switch

These tether float switches are activated by a float that is attached to the pump by a flexible tether that can be adjusted so the pump starts and stops automatically at preset levels. This MDI float switch was designed for extra nasty locations where there maybe sewage and suspended solids. Normally Open switch hanging downward from the cord closes when the float rises 45 degrees above horizontal and remains closed until the float drops 45 degrees below horizontal.

Pump duty mechanical float Switch

Contacts: 13A@120/240VAC, 1/2HP. Normally Open Contacts.

Sealed and approved for septic and sewage systems.

Chemical Resistant Blue Non-Toxic ABS.

Max. Operating Temperature: 180F/82C,

10ft/16-2 SJOW cord.

Exceeds Dayton Float Switches Specifications.

Applications: Sump Pump; lift station; pump control; septic tank; alarm.

UL, CSA & CE Approved

Exceeds performance specifications of Dayton 3BY80 Float Switches.

Proudly Made in USA.

Learn More

Contact block for switch. One NO 10Amp 500VAC (250VDC 0.25A, 125VDC 0.5A). Slow make switching element. Screw terminal. Listed: CSA/UL 827E. Green. Learn More

Cherry Electrical Products - OE6930A0 - Switch, Pushbutton.

Contacts: SPDT. 1 NO & 1 NC, Contact Material: Silver-CdO

Contact Ratings: 10 Amp 125/250VAC (1/3HP, 125/250VAC).

Actuator: 3 Position. Round Plunger - With Pull-To-Cheat Feature , Maintained, Momentary push. 

Terminals: Quick Connect, Brass (Common AG plated) 

Temperature Range: -40 to 85C

Connections: 3/16" QC terminals.

Operating Force: 475 g, Stainless Steel Spring

Mounting: Panel, Snap-in Mounting. Panel Cut-out: 14mm X 28.6mm.

Body: For hole 28mm to 30mm long x 13.3mm min x 24.7mm behind panel plus contacts.

Housing Material: ThermoPlastic Polyester, White.

Operation Life According to EN61058-1: 50,000 Cycles

Listed: UL, CSA, VDE. RoHS Compliant

Alternates: ZF Electronics 2524438, Vishay 1369901, ZF Electronics 2103633

Complex Difficult Switch to Find

Learn More

ALCO - 131AK - Pushwheel Switch, BCD Rotary.

BCD Pushwheel Thumbwheel Switch

0-9, Pshbutton.

Alternate: SMC131AK, DPS8131AK, SH6131AKK2, 65H7577

NSN 5930-01-123-8239

Complete with attached circuit card and a 9 position female connector.

Learn More

Grasslin - BT-120 - Photoelectric Switch, Flush Mount, SPST NC, 120VAC, 50/60Hz, 1500W, 1200VA

Photoelectric switches control the power to a connected appliance or fixture by measuring the light falling on the lens (also called the "eye"). These switches are mostly employed in outdoor locations to allow lights to turn on automatically after the sun has gone down.

Status: Discontinued

Grasslin Photocontrol Flush Mounting

Heavy Duty Commercial Model BT-120 Photoelectric Sensor, Button Type

Power: 120VAC 50/60Hz, 3 Wire 

Switch: SPST Normally Closed (NC)

Switch Capacity: 1500 Watts Tungsten

Switch Capacity: 1200 VA Ballast

Raintight Enclosure

Dusk To Dawn Operation

Housing: Black Thermalplastic

Operating Temperature: -40F to 140F ( -40C to 60C)

Mounting Hole (Minimum): 11/16" (0.688) (17.49mm)

Thicknees Mount Surface (Maximum) : 3/8" (0.375") (9.54mm)

Approximate Body Dimension: 2.0" Long X 1.0" X 0.80"

Applications: All night Safety and Security for walkways, entrances, parking lots, farm yard lighting, recreational areas. Protection Control for homes, schools, commercial and industrial buildings.

In Manufacturing Packaging with Instructions. 

UL, CSA Listed

UPC 147305930

Replaces: Paragon LB201-00, Intermatic K4021, Tork 3000, ALR AA-105, Fisher Pierce FA-105, Precision A-105

 

 

Learn More

PHOTOELECTRIC SENSOR, 120VAC, .5AMP MAX LOAD, 2mA LEAKAGE, SHORT CIRCUIT PROTECTED. Learn More