Temperature Switch
- KLIXON - C9192-1-2 - Thermostat, Adjustable 0-500 Deg. 10 Amps, With spec sheet.IN STOCK - MORE THAN 1,000 READY TO SHIP!
KLIXON - C9192-1-2 Thermostat, Adjustable 0-500 (F) range
Used in Baking ovens, removable appliance controls and where low mass.High heat ratios require rapid thermostat response.
10Amps.
Silver Contacts Open on temperature Rise.
1650 watt 120VAC, 2400 watt 240VAC (resistive).
Rapid response, industry standard.
Body approximately 4-5/8" x 5/16" wide on round shaft.
Adjustable screw may have to be loosened.
See Attachement for Detailed Specifications.
Availabe upon request.
Learn More - Federal Pacific / Reliance Electric - PMF-1 - Line Voltage Fan Cooling Ventilation ThermostatIN STOCK - MORE THAN 500 READY TO SHIP!
Federal Pacific / Reliance Electric - PMF-1 - Line Voltage Mechanical Fan Cooling Thermostat.
Ideal for whole house exhaust ventilation, power vents, gable roof & attic fans, industrial or farm.
Commercial High Quality, Mercury-Free, Heavy Duty, Single line break.
Approx. 50ºF - 95ºF Turn-on Setting.
Single Line Break 22 Amp Max 120 VAC.
Ratings: 3/4 H.P. @ 120VAC 60HZ. 1 Phase or 1 1/2 HP @ 240 VAC 60 Hz 1 Phase
UL listed.
Made in USA
Learn More - Sensata Klixon - C4344-198-15 - 3100-3-322 - Precision Thermal cutout. NC 450 Deg F. Note: Elmwood/Honeywell 3100-3-322 Snap Switch.Special Price $12.98 Regular Price $18.95
Sensata Klixon - C4344-198-15 - 3100-3-322 Thermal cutout. SPST NC 450 Deg F.
The Klixon® 4344 precision thermostat is constructed with a snap-acting bimetal disc, which serves as the actuating element. As the temperature reaches a pre-determined calibration point, the disc snaps to its reverse curvature producing a crisp, positive switching action inherent to Klixon® thermostats. This feature assures reliable, consistent operating temperature over a long cycle life. The standard thermostat is copper-nickel plated with silver contacts
Note: Elmwood/Honeywell 3100-3-322
SPST Snap Action Normally Closed Contacts
Normally Closed: Limit type application; contacts open on temperature rise at a predetermined (450F) temperature to de-engergize the circuit. Contacts automatically re-close as the device cools to a pre-determined (410F) temperature.
Contact Rating: Life Cycles 100,000 Cycles = 30VAC/DC@5A, 125AVC@2.5A, 250VAC@1
Contact Rating: Life Cycle 5,000 Cycles = 30VAC/DC@7A, 125VAC@6A, 250VAC@3
Ambient Temperatur Range: -80F to 550F (-62.2 Cc -287.8C)
Case: small metal disc 15.3mm D round on a oval base with 24mm mount centers, 2 teflon lead wires 4-3/4" long.
Overall 9.0mm tall max.
Inventory has either White or Blue Teflon Lead Wires,
Additional: https://www.sensata.com/sites/default/files/media/documents/ourproducts_Thermostat_4344_datasheet.pdf
Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Automotive • Microwave ovens
Proudly Made in USA
- THERMOSWITCH - 17021-0 - Thermostat. Adjustable -100 to 400 Deg F.$40.00Out of stockThermostat. Adjustable -100 to 400 Deg F, NO, 10Amp 120VAC, 5A 240VAC. Contacts close on temp rise. Dimensions: 6.5" long head x 5/8" OD. One inch (1") threaded mount. Note: Fenwal 00-017021-0. Learn More
- THERM-O-DISC - 20MAA3FA - Motor Protection Temperature Sensor Switch, NC Contacts.Special Price $12.98 Regular Price $16.95THERM-O-DISC - 20MAA3FA – Normally Closed Contacts Motor Protecting Temperature Sensor Switch. The Therm-O-Disc line of Motor Protectors offers accurate and reliable protection against hazardous overheating in single phase/single voltage A/C motors. This motor protector employs a snap-acting, current and temperature responsive bimetal disc for proven performance over life. An internal resistance heater utilizes the effects of current to bias the operation of the bimetal disc for added thermal response. A wide range of bimetal and heater combinations are available to cover specific design requirements. This design flexibility and proven performance has made Therm-O-Disc Motor Protectors a popular choice among the leading manufacturers of fractional horsepower motors. The operating mechanism inherent to all Therm-O-Disc Motor Protectors is the snap-action bimetal disc. During abnormal conditions, heat generated by resistance and/or motor ambient causes the bimetal disc to snap at the specified calibration temperature. This allows the circuit to open within the maximum safe limits of the motor windings. Once the motor returns to a normal operating temperature, the bimetal disc resets automatically. This closes the circuit and re-energizes the motor. This same snap-action principle is utilized in millions of Therm-O-Disc products applied in the appliance, heating and air conditioning industries. The Motor Protector features include: • High-speed contact separation ensures long contact life. • Current and temperature responsiveness for excellent design flexibility. The Motor Protector series has been rated by major agencies throughout the world. The agency ratings can be used as a guide when evaluating specific applications. However, the mechanical, electrical, thermal and environmental conditions to which a control may be exposed in an application may differ significantly from agency test conditions. Therefore, the user must not rely solely on agency ratings, but must perform adequate testing of the product to confirm that the control selected will operate as intended in the user’s application. This is an over temperature motor protector which opens its contacts (SPST) when excessive temperature is sensed. Bimetal Resistance: 0.0015 Ohm, Heater Resistance: 0.0320 Ohm Temperature: Opens @ 110 C (230 F), Closes @ 45 C (113 F) Current Rating: 50A @ L.R. 120V, 37 A @ L.R. 240V Dimensions: 1.38" Wide x 1.32" X R2.50 Radius Curved 0.38" Thickness. Weight: 0.5 Ounce (15 Grams) Termination: Two Side Entry 1/4" Quick Connect Terminals. Applications: Commercial, Industrial, and Residential, Including Several Whirlpool, Maytag, Kenmore Dryer as a motor fuse. New Old Stock Made in USA Learn More
- KLIXON - MRF78EV - Thermostat, thermal cut out. NC.Special Price $12.98 Regular Price $16.50
KLIXON - MRF78EV Thermostat, Thermal Cut Out.
Normally Closed, Open up at an unknown temperature.
Dimensions: 26mm dia x 21mm tall.
Adjustment Stem.
Applications: Automatic Motor Protection
Learn More - KLIXON - MRF59EV - Electric Motor Overload Protector - Thermostat, thermal cut out.Special Price $12.98 Regular Price $16.50
- SIEBE ENVIRONMENTAL CONTROLS - TC-5231 - LOW TEMP. AUTO RESET$60.00LOW TEMP.-AUTO REST SWITCH: SPDT; OPENS HIGH OR LOWRANGE 35F TO 60F DIFF: 5F FIXEDSENSOR: 240" CAPILLARY Learn More
- KLIXON - MEG87LA - Thermal cut out with reset.$19.95Out of stock
Thermostats. Thermal cut out with reset button. Base: Eared 1" D, 0.3" tall base is 0.7" wide. For: Klixon phenolic motor protectors. Single phase.
Learn More - Kiddle Fenwal - 8-217 - 30000 Series - Switch, Temperature Controller. Thermal switch 115V 10Amp.Special Price $18.98 Regular Price $28.95Out of stock
Kiddle Fenwal - 3000 Series Temerature Switch.
Thermal switch 115V 10Amp 60 cycle NC Adjustable.
P/N: 11-030000
Learn More - EDISON - 393-00121 - Switch, thermostatic. 129 Deg F.$25.00Switch, thermostatic. 129 Deg F. Package: glass cylinder with 2 radial leads. Note: Thermostat. Military NSN 5930-00-670-8242. Learn More
- Cutler-Hammer / Eaton - H1112 - Contactor, heating element.$10.99Contactor, heating element. Learn More
- Cutler-Hammer / Eaton - H1062 - Overload heater coil element.$10.99Overload heater coil element. Learn More
- Cutler-Hammer / Eaton - H1060 - Overload heater coil element.$10.99Overload heater coil element. Learn More
- Cutler-Hammer / Eaton - H1022 - Overload heater coil element.$10.99Overload heater coil element. More info: page 13 http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/tb03305001e.pdf Learn More
- Cutler-Hammer / Eaton - H1016 - Overload heater coil element.$10.99Overload heater coil element. Learn More
- Cutler-Hammer / Eaton - H1014 - Overload heater coil element.$10.99Overload heater coil element. Learn More
- Cutler-Hammer / Eaton - H1012 - Overload heater coil element.$10.99Overload heater coil element. Learn More
- Cutler-Hammer / Eaton - H1010 - Overload heater coil element.$10.99Overload heater coil element. Learn More
- MICROTEMP - 4178A1 - Thermal switch. TCAGT84C/178 Deg F.$10.00
MICROTEMP - 4178A1 Thermal Sensing Fuse.
A surge suppressor which provides overvoltage protection for AC power lines, coaxial transmission lines and communication lines using a virtual ground rather than a separate ground conductor.
Thermal Switch.
TCAGT84C/178 Deg F.
Package: Axial Leads.
Learn More - Invensys Building Systems - 2212-518 - Pneumatic Room Thermostat 55-85F$55.88Out of stockUNI-KIT TWO PIPE - DIRECT ACTING. Includes factory installed 20-712 Dial Stops, Convertible Cover and 22-022 conversion kit, instructions. ...designed for proportional conrol of pneumatic devices and actuators in environmental control systems. Satin chrome metal, set point adjustment. Learn More
- IMO BARKSDALE - ML1H-H352SWS - THERMOSTAT 165-to-290F$39.00THERMOSTAT - INDUSTRIAL +165 to +290 degreesF (74-143degC) 10Amp Contacts - enclosure and large attached probe Learn More
- CONRAD-KACSIK - K33008G-305-8B2 (1/2") -04M - Temperature Probe.Special Price $32.98 Regular Price $48.50
CONRAD-KACSIK - K33008G-305-8B2 (1/2")- 04M - Temperature Probe.
Since 1977 we have been the industry leaders in temperature measurement, combustion, data acquisition & controls technology. We can precisely perform a wide range of engineering services and help you comply with stringent industry standards, such as AMS2750, Nadcap, CQI-9 and CFR-21."
With Mating Thermocouple Connector.
Mount: Right Angle.
Learn More - VECO - 51A1 - Thermistor.$11.99Out of stockThermistor. Package: 2" glass tube, 2 radial leads. Learn More