Thumbwheel Switch

Cherry Electrical Products - T55-07M0 Switch, Pushwheel /Thumbwheel.

The smallest of them all! Dustproof design. Offered in a wide variety of positions and output codes. Furnished with extended PC board to provide mounting of other components. 

Status: Discontinued

Cherry Industrial Solutions - Subminiature Pushweel Switch

Single 8 Position, Code BCD

Output: 0 - 7

Two Pushbuttons for Up and Down.

Stackable.

Binary Encoded: Pins are labeled 1, 2, 4, 8 and C

Five Position Edge Card Contacts or Solder.

Dielectric Strength: 500 VAC

Temperature: -40°C to + 70°C

Dimensions: 0.300" Wide x 0.591" High, 0.946" Behind Panel.

Alternate: Newark 93F5293, ZF 0T5507M0

Applications: Industrial, Commercial, Aerospace

New Old Stock - Rare

New Cherry Electrical Products - PHGF3100 - Switch, Thumbwheel.

Switch, thumbwheel. Pushbutton 0-15 Hexadecimal. 16 Position. Two push switches, one above character ( - down ) and another one below window ( + up ). Rating: 0.1A/50VAC, 5-solder pins 7mm long. Switch is only 11mm wide, snaps into a 13mm wide 14.5mm high (approx).

Status: Discontinued

Switch Type: THUMB/PUSHWHEEL SWITCH

Actuator Angle: 0.0 deg

Actuator Length: 0.157 inch

Body Color; BLACK

Body Height: 24.3586 mm

Body Length or Diameter: 15.0114 mm

Contact Function; ON-ON

Contact Timing; BREAK-BEFORE-MAKE

Manufacturer Series: PH

Mounting Feature: PANEL MOUNT

Number of Positions; 16

Switch Action; CIRCULAR

Switch Function HEXADECIMAL

New Old Stock

Alternate: PHGA3100

ELECTROSWITCH DIGITRAN - 715/107-2 - Switch, thumbwheel.

BCD 0-99,

2 Digit - Ten-Position. 0-99 BCD.

Gold-plated terminal boards.

"Miniswitch-series".

Weight 0.64 lbs.

EECO - 1A211034GF

Switch, Thumbwheel/StripSwitch.

Actuator: 0-9 and A-F.

Orientation: Counter Clockwise Rotation

Connection: 12 dip. Mech: PCB.

Body: 19.6mm long x 20.1mm wide x 10.1mm high (With dial on right).

Note: Stripswitch. Marked 1A211034GF Hall-Mark.

More info: http://www.eecoswitch.com/

New Old Stock - Rare

Switch, decimal. Contacts: SP BCD 10 Position. Actuator: 0 - 9 ( 9 Gang ) Minilever, switchbank. Mech: Panel. Panel hole: 4.67" long x 1.15" wide x 1.45" deep (behind panel). Front mount flange 5-5/16" long x 1.15" wide, has 4 mount holes at 5-1/4" centers . Note: Each of 9 positions has an 11 pin (11 position) edge card on rear. All position are removable, so the switch is actually 1 through 9 positions. Made in the USA.

Switch, rotary. Contacts: 2P (Dual) BCD 0-2 and 0-9 (0-29). Connection: PC solder leads. Mech: Panel, with four holes at 1.825" centers. Panel hole: 1.475" long x 1.222" wide x 1.178" deep, behind panel. Mount flange is 1.775" long x 1.210" wide. Note: Bottom reads 177606M.