Toggle Switch

Switch, toggle. Contacts: DPDT. Contact Ratings: 15Amp 125VAC/10Amp 250VAC (3/4HP 250VAC). Actuator: On-None-Off. Connection: solder terminals. Mech: Panel, one hole. Body: 1.330" long x 0.750" wide x 1.010" high, behind panel including terminals. Note: Threaded bushing length: 0.490". Actuator length: 0.580". Made in the USA. Listed: UL/CSA. Learn More

Switch, lever. Contacts: SPST. Contact Ratings: 10Amp 125VAC/5Amp 250VAC (1/4HP 125-250V). Actuator: momentary. Mech: Panel. Note: Spring-loaded locking lever switch, heavy duty. Made in the USA. Learn More

CUTLER-HAMMER - 7163K2 Switch, Industrial Toggle.

Contacts: 3PDT.

Contact Ratings: 15Amp 125VAC/10Amp 250VAC.

Connection: Solder Terminals.

Mech: Panel, One hole.

Body: 1.84" long x 1.382" wide x 1.013" below panel, including terminals.

Note: Threaded bushing length: 0.460".

Actuator length: 0.662".

Additional spec's: 1HP 1-2PH 125-480VAC/1HP 3PH 125-600VAC.

New Old Stock

Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 6Amp 125V AC/DC, 3Amp 250VDC. Actuator: On - Off. Connection: 4 wire leads, 18AWG, 6" long. Mech: Panel mount. Bushing: 3/8" x 0.480" long. Body: 1.156" long x 0.937" x 0.687". Note: Listed: UL/CSA. Learn More

Cutler-Hammer / Eaton - 7505K4 - Switch, toggle. Contacts: SPDT. Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (3/4HP 250VAC, 1/2HP 125VAC). Actuator: On-None-On. Connection: Solder Terminals. Mech: Panel, bushing. Panel hole: 1.133" (28.7mm) long x 0.608" (15.4mm) wide x 0.629" (16.0mm) high. Note: Bushing: 3/8" D x 12.9mm long. Actuator: 14.5mm long. Learn More

Eaton - Cutler Hammer - 7691K14 Switch, Toggle.

4PST 15Amp 125VAC/10Amp 250VAC, 3/4HP 250VAC.

Threaded bushing 3/8" x 0.463".

Actuator: 0.687" long.

Mount: Panel. Heavy duty.

Termination: 8 Solder Terminals.

Complete with hardware.

Made in USA

Learn More

Switch, toggle. 3PST 15Amp 125VAC/10Amp 250VAC, 3/4HP 250VAC. No bat. Mount: panel. Contacts: 6 screw terminals. Listed: UL. Learn More

Switch, toggle. 3PDT-15A. On-Off-On. Two threaded hole front panel mounting, 0.89" spacing. Screw terminals, missing screws. bulk pkg'd. Width 1.37" (34.8mm), Height 1.79" (45.5mm), Length 1.77" (45mm) NSN 5930-002403671, Made in the USA. Learn More

Switch, toggle. SPDT 10Amp 250VAC. 3 Position, center off, both sides momentary. Bushing length: 1/2". Lever length: 9/16". Contacts: 3 screw terminals. Learn More

Cutler-Hammer / Eaton - 8788K5 - MS25072-8 Switch, toggle.

SPDT Off/ON(Mom). Heavy duty.

Plate Design: Toggle Switch

Switch Style: Toggle/Joystick

Termination: Type Screw

Contact Material: Brass

Features: Heavy Duty

Maximum Amperage: 20 A

Color: Black

Double marked 8788K5.

Mount: Panel. Two hole mount with 1.792" centers.

Dimensions: 2.147" long x 1.152" wide x 2.535" deep (behind panel).

Contacts: 3 large stud terminals.

Genuine Cutler Hammer - New Old Stock

Learn More

Cutler-Hammer / Eaton * - 8373K8 - Switch, Toggle.

DPST 6Amp @ 125VAC, 3Amp @ 250VDC.

Threaded bushing: 3/8" x 0.355".

Actuator: 0.50".

Dimensions: Overall 1.153" long x 0.687" wide.

Termination: 6 Solder Terminals.

Genuine Cutler Hammer - New Old Stock

Military NSN 5930-00-259-8341.

Learn More

Switch, toggle. DPDT 2 Position 6Amp 125VAC/3Amp 250VAC. Threaded bushing 3/8" D x 0.349" long. Actuator: Bat 0.68". Material: plastic. Mount: panel. Dimensions: 1.172" long x 0.694 wide. Termination: 6 solder terminals. Complete with hardware. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 2Amp 115VAC, 1Amp 28VDC inductive, 4Amp 28VDC resistive. Actuator: On-On. Connection: solder. Mech: PCB or Panel. Body: 13.5mm long x 8.6mm wide x 13.0mm high. Threaded seated bushing 10.1mm D round x 6.3mm high. Actuator 10.8mm long. Note: Miniature. Complete with red rubber sleeve over bat. Learn More

Switch, toggle. Contacts: 4PDT. Contact Ratings: 15A 115VAC (20Amp Resistive) 400Hz. Actuator: On-On. Connection: 12 solder contacts. Mech: Panel. Body: 1.442" (36.6mm) long x 1.332" (33.8mm) wide x 0.977" (24.8mm) high, plus contacts. Note: Threaded bushing: standard 3/8" D x 11.7mm long. Actuator: 17.1mm long. Complete with hardware. Alt P/N: MS25068-23. Learn More

Cutler-Hammer Eaton - 8906K4920 - Switch, Toggle. Environmental Sealed, Resistant to Dust, Dirt, Spray Extreme Temperatures Contacts: SPDT. Contact Ratings: 15A @ 125VAC, 15A @28VDC. Actuator: Center-Off. Pull-to-Switch. Momentary Both Sides. Requires 0.47" diameter hole to mount, 15-32 Bushing 32 Thread Connection: Screw Terminals with screws, black dress nut, washer, nut and locating ring. Mech: Panel Mount. Thermoset molding materials meet flame retardant requirements Temperature Range: -85°F to +160°F (-65°C to +71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life Note: Must Pull-to-switch either side. Applications: Aircraft-instrument, military-purpose style. Lever lock with lever seal. Made in USA - Mil Grade Lever Lock toggle switch Learn More

Switch, toggle. Contacts: 4PST. Actuator: Off-(On) = momentary. Connection: 2 screw terminals. Mech: 3/8" threaded bushing. Note: Weather proof / oil sealed shaft. Double marked 8838K11. Learn More

Cutler-Hammer / Eaton - MS25125-9 Switch, Toggle.

Contacts: SPST.

Actuator: ON-OFF.

Connection: 2 screw terminals.

Mech: 3/8" threaded bushing.

Note: Double marked 8857K21.

Learn More

Switch, toggle. SPDT 115VAC/28VDC 15Amp, lever lock with lever seal, On/Off/On, maintained position. Double marked 8857K3. Military NSN 5930-00-578-2348. Contacts: 3 screw terminals. Learn More

Switch, toggle. Contacts: SPDT. Actuator: Momentary-Off-Momentary. Connection: 2 screw terminals. Mech: 3/8" threaded bushing. Note: weatherproof seal.

Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 6Amp 125VAC, 3Amp 250VAC. Connection: screw terminals. Note: Threaded bushing. Learn More

Cutler-Hammer / Eaton - 3-683 Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 6Amp 125VAC, 3Amp 250VAC.

Actuator: One side momentary.

Connection: Solder.

Mech: panel.

Panel hole: 1.345" long x 0.752" wide x 0.791" high.

Threaded bushing 15/32" D x 0.487" long.

Actuator 0.683" long.

Made in the USA.

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 7Amp 115VAC. Actuator: On-(Off). Connection: Solder terminals. Mech: Panel, bushing. Body: 28.8mm long x 16.1mm wide x 22.6mm deep behind panel. Note: Threaded bushing length: 13.0mm. Actuator length:17.4mm. Double marked:ST42B. Complete with hardware. Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 10Amp 115VAC. Actuator: On-Off (Mom). Connection: screw. Mech: Panel. Panel hole: 1.145" long x 0.638" wide x 0.626" high. Standard 15/32" threaded bushing x 0.524" long (seated). Actuator: 0.683" long. Note: Double marked MS35058-25. Complete with hardware. Learn More

Cutler-Hammer / Eaton - 8374K7 Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 6Amp 125V/3Amp 250VAC.

Connection: 6 Wire leads.

Switch Circuit: On - None - On

Mech: Panel, bushing.

Body: 29.3mm long x 17.6mm wide x 19.8mm deep behind panel.

Note: Both position maintained.

Threaded bushing length:12.5mm.

Bushing seat: 1.3mm.

Actuator length: 12.6mm.

Complete with hardware.

UL Approved

Proudly Made in USA

Learn More