Toggle Switch

MARQUARDT GMbH - 1821 1101 Switch, Toggle with 343.001.023 Weatherproof Boot.

Marquardt 1820 series toggle switches are suitable for use in Class II appliances. A black Neoprene® lever cover which simply screws onto the toggle switch M12x0.75mm bush is available to protect the actuator from dust and water ingression.

Contacts: SPST ON/OFF.

Contact Ratings: 6Amp 125/250VAC.

Connection: Two 3/16" Male Quick Connect Terminals, or maybe soldered.

Mech: Panel, Snap-in.

Body: ThermoPlastic Glass Fiber Reinforced

Color: Black.

Overall 0.943" Long x 0.648" wide.

Behind Panel 0.808" Long x 0.476" wide.

Note: With Weatherproof Neoprene® Boot.

Threaded Bushing Length: 0.308".

Operating Temperature: -20 C to 55 C

Life Cycles: 50,000

Actuator Length: 0.542".

Rohs Compliant

Alternate: Mouser  979-1934-3114 Switch 

MARQUARDT GMbH - 1821 1101 Switch, Toggle with 343.001.023 Weatherproof Boot.

Marquardt 1820 series toggle switches are suitable for use in Class II appliances. A black Neoprene® lever cover which simply screws onto the toggle switch M12x0.75mm bush is available to protect the actuator from dust and water ingression.

Contacts: SPST ON/OFF.

Contact Ratings: 6Amp 125/250VAC.

Connection: Two 3/16" Male Quick Connect Terminals, or maybe soldered.

Mech: Panel, Snap-in.

Body: ThermoPlastic Glass Fiber Reinforced

Color: Black.

Overall 0.943" Long x 0.648" wide.

Behind Panel 0.808" Long x 0.476" wide.

Note: With Weatherproof Neoprene® Boot.

Threaded Bushing Length: 0.308".

Operating Temperature: -20 C to 55 C

Life Cycles: 50,000

Actuator Length: 0.542".

Rohs Compliant

Alternate: Mouser  979-1934-3114 Switch 343.001.023 Boot

Approvals: UL; CSA; ENEC

Made in Germany

Approvals: UL; CSA; ENEC

Made in Germany

Learn More

C & K Components - 7103J60ZMI32 Switch, Toggle/Paddle.

Contacts: SPDT.

Contact Ratings: 5Amp 120V, 2Amp 250V.

Contact Material: Silver

Operating Temperature: -30 C to 85 C

Actuator: On-Off-On.

Connection: PC leads.

Mech: Panel, Snap-in.

Panel Hole: 17mm long x 12mm wide x 17mm behind panel plus contacts.

Note: Red Paddle J60 actuator.

Electrical Life: 40,000 Cycles

Complete with black bezel 19.43mm long x 15.62mm wide.

New Old Stock

Learn More

JBT - MR1-123 - JBT Switch, Paddle Miniature, Electroswitch B123J2ZQ2.

Status: Discontinued

Contacts: SPDT.

Switch Circuit: On - None - On

Number of Positions: 2 Position

Contact Ratings: 5A 125VAC.

Voltage Rating (DC): 28 V

Contact Material: Silver

Actuator: Paddle. (White)

Connection: Solder PC pins.

Dimensions: Width: 0.47 in, Height: 1.34 in, Length: 0.75 in

Mech: Panel Mount, two holes 0.93" spacing plus two 0.25" spacers, screws & nuts.

Genuine  JBT - New Old Stock

Note: Formerly Eaton (JBT) Now Electroswitch B123J2ZQ2

Alternate: B123J2ZQ2-ND, Allied 70152395

Made in USA

 

Learn More

JBT - PFH-4223P Switch, Toggle, Heavy Duty AC Industrial

Contacts: SPDT.

Contact Ratings: 20Amp 125VAC, 10Amp 250VAC (3/4HP 250VAC, 1/2HP 125VAC).

Actuator: Off-On.

Connection: Brass Male 1/4" Quick Connect Terminals.

Mech: Panel, standard 3/8" D x 0.470" (11.9mm) long, bushing mount.

Panel hole: 1.339" (34.0mm) long x 0.750" (19.0mm) wide x 0.811" (20.6mm) high, plus contacts.

Note: Flat Bat 0.362" (9.2mm) wide x 0.653" (16.5mm) long.

Vintage - New Old Stock

Typical Applications: Marine, Food Service, Generator, Industrial Control ,Office Automation

Proudly Made in USA

Learn More

Cutler-Hammer / Eaton - 7590K6 - Switch, Toggle.

The 7500 series general purpose Toggle Switch offers the widest selection of features and the design flexibility to meet a variety of applications.

Contacts: DPST (2 Position).

Contact Ratings: 6Amp @ 125VAC, 3Amp @ 250VAC, 2Amp 277VAC.

Elect Config: Off - None - On

Terminatuion: Solder Terminals.

Mech: Panel Mount with Threads.

Body: 1.317" long x 0.753" wide x 1" behind panel, including terminals. (33.3X31.8X14.3mm)

Note: Bushing: 3/8" D x 0.50" long.

Actuator: Bat 0.544" long.

Complete with Hardware.

Approvals: CSA, UL, RoHS Compliant

Genuine Cutler Hammer - New Old Stock

Alternate: Newark 04M4782, Allied 70155741, UPC 786685680514

Applications: Industrial

Learn More

C & K Components - 7207KC Switch, toggle.

Contacts: DPDT. Series 7000

Contact Ratings: 120VAC 5Amp (0.4VA).

Actuator: 3 Position, Pull to switch. On-Off-Momentary.

Each side On can be locked into place.

Mech: PCB, 6 pin.

Note: Miniature.

Threaded Bushing length 0.377".

Actuator length: 0.581".

Additional Information: https://www.ckswitches.com/media/1394/7000toggle.pdf

Learn More

ITT C&K - T301 Switch, Toggle.

Contacts: 3PDT.

Contact Ratings: 0.4VA / 5Amp.

Actuator: On-On.

Actuation: Vertical 

Connection: 9 Right Angle Terminals.

Mech: PCB.

Note: Non threaded bushing 0.293" long.

Actuator: 0.270" long.

Proudly Made in USA

Alternate: C&K 7000 Series 7301MD9AV2BE

New Old Stock

Learn More

CHALLENGER - 1122 Silent Toggle / Rocker Switch.

Contacts: Double Pole, Grounded.

Coloor: Brown

Contact Ratings: 20Amp 120/277VAC.

Connection: Back wired/Side wired. (Brass Screws) 

Mech: For mounting in a wall mounted electrical box (wall switch).

Note: High Quality - New Old Stock.

Listed: CSA.

Learn More

C & K Components - 7101SY9V3BE - Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 5Amp 120VAC or 28VDC, 2Amp 250VAC (0.4VA 20V AC/DC).

Actuator: On-On.

Connection: PCB 3 pin.

Mech: PCB.

Panel hole: Mount frame 16.3mm long x 8.1mm wide x 11.9mm high.

Note: Non-threaded bushing: 7mm long.

Actuator: 12.0mm long.

Miniature.

Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 2Amp 115VAC, 1Amp 28VDC inductive, 4Amp 28VDC resistive. Actuator: On-On. Connection: solder. Mech: PCB or Panel. Body: 13.5mm long x 8.6mm wide x 13.0mm high. Threaded seated bushing 10.1mm D round x 6.3mm high. Actuator 10.8mm long. Note: Miniature. Complete with red rubber sleeve over bat. Learn More

Cutler-Hammer / Eaton - 3-683 Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 6Amp 125VAC, 3Amp 250VAC.

Actuator: One side momentary.

Connection: Solder.

Mech: panel.

Panel hole: 1.345" long x 0.752" wide x 0.791" high.

Threaded bushing 15/32" D x 0.487" long.

Actuator 0.683" long.

Made in the USA.

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 7Amp 115VAC. Actuator: On-(Off). Connection: Solder terminals. Mech: Panel, bushing. Body: 28.8mm long x 16.1mm wide x 22.6mm deep behind panel. Note: Threaded bushing length: 13.0mm. Actuator length:17.4mm. Double marked:ST42B. Complete with hardware. Learn More

Cutler-Hammer / Eaton - 8374K7 Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 6Amp 125V/3Amp 250VAC.

Connection: 6 Wire leads.

Switch Circuit: On - None - On

Mech: Panel, bushing.

Body: 29.3mm long x 17.6mm wide x 19.8mm deep behind panel.

Note: Both position maintained.

Threaded bushing length:12.5mm.

Bushing seat: 1.3mm.

Actuator length: 12.6mm.

Complete with hardware.

UL Approved

Proudly Made in USA

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 15Amp 125VAC. Actuator: On-Off(Mom). Connection: solder terminals. Mech: One hole threaded bushing mount/panel. Body: 1.136" long x 0.632" wide x 0.626" high. Note: Bushing length: 0.494". Actuator length: 0.674". Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: panel. Body: 1.321" long x 0.745" wide x 0.738" high. Standard 15/32" threaded bushing x 0.351" long. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (3/4HP 250VAC, 1/2HP 125VAC, 4.2AL 125VAC). Connection: screw. Mech: Panel. Panel hole: 1.135" long x 0.630" wide x 0.625" high. Standard 15/32" threaded bushing x 0.401" long (seated). Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 15Amp 125VAC/10A 250VAC, 3/4HP 250VAC. Actuator: center-off (On-None-On). Connection: 3 solder terminals. Mech: PCB / panel. Mount: 1 hole 0.469" D bushing. Body: 1.125" long x 0.624" wide. Note: Bushing length: 0.378" long. Shaft length: 0.632". Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 125VAC 15A/250VAC 10A, 3/4HP 125-250VAC. Actuator: On/Off/(On). Connection: 3 screw terminals. Mech: Panel 15/32-32UNS-2A. Body: 1.330" long x 0.76" wide. Bushing length: 0.507". Actuator length: 0.675" long. Note: Listed: UL/CSA. Learn More

C & K Components - 7101L1H3ZQE Switch, toggle.

Contacts: SPDT.

Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.

Actuator: On-None-On.

Connection: solder terminals.

Mech: PCB. Body: 12.8mm long x 6.8mm wide x 10.5mm high.

Threaded bushing 9.4mm long (seated).

Note: Miniature, long bat 16.1mm long, sealed contacts.

Learn More

EATON - CUTLER-HAMMER - 7580 - 3-028 - Switch, Toggle.

Contacts: DPST.

Contact Ratings: 6Amp 125VAC/3Amp 250V.

Actuator: 125 - 277VAC.

Connection: Solder terminals.

Mech: Panel, bushing.

Panel hole: 1.318" long x 0.749" wide x 0.740" behind panel plus contacts.

Note: Bushing length: 0.501" long.

Actuator length: 0.573" long.

Learn More

Switch, toggle. Contacts: DPST. Actuator: On - Off (Mom). Connection: screw terminals, #6-32. Mech: Panel, Bushing 15/32" - 32 thread. Body: 1.341" long x 0.750" wide x 1.000" behind panel. Note: Threaded bushing length: 0.473". Actuator length: 0.700". Double marked ST52L. Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 10Amp 115VAC. Actuator: On - Off (Mom). Connection: solder. Mech: Panel. Panel hole: 1.134" long x 0.637" wide x 0.684" high. Standard 15/32" threaded bushing x 0.517" long (seated). Actuator: 0.690" long. Note: Complete with hardware. MS35058-29. Former MS35058-10. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 10Amp 115VAC. Actuator: On (Mom)-Off-On (Mom). Connection: screw. Mech: Panel. Panel hole: 1.134" long x 0.637" wide x 0.684" high. Standard 15/32" threaded bushing x 0.502" long (seated). Actuator: 0.671" long. Note: Center off. Complete with hardware. MS P/N: M35058-27. Former P/N: MS35058-7. Learn More

Switch, toggle. Contact Ratings: 120/277VAC/15Amp 3-Way. Actuator: illuminated. Illumination: Red. Note: Pilot light. Back and side wired. Spring loaded screw terminal, hex grounding screw. Application: for mounting in a 2x4 handy box. Learn More