Toggle Switch

C & K Components - T203SY9V3GE Switch, toggle.

T-Series Subminiature Toggle Switch

Contacts: DPDT Center-off.

Contact Ratings: 2A 125VAC/28VDC or 0.4VA low level / dry circuit,

Contact Material: Gold over Silver Contacts.

Actuator: On-Off-On.

Connection: Gold over tinned PC pins, Epoxy sealed.

mount: Vertical Mount, V-Bracket

Mech: PCB, bushing is not threaded.

Body: 0.358" x 0.40" x 1.0" above pc board.

Made in USA

 

Learn More

HONEYWELL MICRO SWITCH - 11TS1-21 Switch, Toggle, SPST.

MICRO SWITCH TS Series toggles may be used anywhere manual operation is desired. They are an entry-level solution for applications that do not require a sealed toggle switch.

Hermetic and environmentally sealed toggle switches offer enhanced reliability with MICRO SWITCH™ technology. Can be used in a variety of applications where a panel-mount switch with an environment-proof rating is needed, including industrial equipment, military and commercial aviation, agriculture, process control, and medical.

Type: Stainless Steel. Phenolic Toggle

Contacts: SPST, 2 Position Maintained, Silver Cadmium Oxide

Contact Ratings: 15Amp 125, 250, 277VAC (1/2HP 125V, 1HP 250, 277V, 5A 125VAC).

Actuator: Off-On. Maintain/Maintain

Connection: Screw Terminals.

Mech: Panel, Bushing. Lever-to-Bushing Seal

Body: 1.131" (28.7mm) Long x 0.638" (16.2mm) Wide x 0.694" (17.6mm) High.

Threaded Bushing: 1/2" D x 12.3mm long.

Actuator: 17.2mm Long.

Operating Temp.: -54C to 71C (-65F to 160F)

Complete with Hardware.

Listed: UL, CSA, CE

Made in USA

NSN: 5930-00-655-1514

Alternates: 00-00370-08, 0232-5, 09N051N, 11TS1-1, 12521, 144422, 146-007-0001  , 16-02262, 1942198-3, 1942198-3, 21C1596-41, 270-900011-001, 270-900011-011, 3200708-1, 320AS116-8, 34861033, 35058EM, 400004-16, 4101, 4101JT, 411036-21, 511TS1-7, 51590, 567584, 59027-105, 689-209, 7002B53, 7502K12, 7502K13, 7581K4, 7581K5, 7581K6, 7581K7, 7768942PTS, 7800-0042-001, 812031-0021, 82602, 82650, 83004, 86202, 8800K13, 8800K13, 8800K13, 8800K16, 8800K7, 8802K10, 8802K6, 90-333, 9N51N, AN3021-1, CH8800K16, CH8802K10, D72205WG, F611, INR122-123, JAMST42E, L42E, MIL-DTL-83731, MIL-S-83731, MS35058, MS35058-1, MS35058-16, MS35058-21, Q70994-20, RS62, S382-1, SA13, ST40E, ST42E

Learn More

Industrial Cutler-Hammer / Eaton - 8130K20J15V51, DPDT On/Off/On, Center-Off, Motor Reversing Toggle Switch (Already Cross Strapped) Permits usage for Polarity Reversing Motor. Alternate 8951159

White Rocker Identified FWD & REV, 6A-125VAC, 3Amp 250VAC, 2A-277VAC

Six (6) 1/4" Quick Connect Male Tabs, Dimension: 1.45" wide x 1.33" x 1.16"

Panel Mount Fits standard .83 x 1.48 Inch Rectangular opening. Switch secured by included snap-on bezel. 

Very handy item to have around the shop if you are DYI type. Used for all sorts of DC motor reversing applications such as camper trailer jacks, winch controls for in/out operation, door open closed, liftgate up/down, boat navigation and anchor or Automotive Motor Control.

This switch can be used when you want to feed (2) loads from 1 or 2 sources. This switch may also be used as a SPDT switch by simply not using 3 of the terminals.

Made with Pride in USA

 

 

 

Learn More

Carlingswitch - 2GK53-NBL - Model 3XSC1 Switch, Toggle with Paddle.

G Series Toggle Switches Contains a slow-make, slow-break contact mechanism.

Contacts: DPST. Double Pole,  On-None-Off

Contact Ratings: 15Amp 125VAC, 10AMP 250VAC, 1/2 HP 125-250 VAC

Actuator: Nylon Bat Handle. Toggle Length - .687", Bushing Length - .465" 

Use .250" Tab Terminations

Note: With Hardware.

Alternates: 2GK51-NBL3, 35-3150, AML33FBA4AC01

New Old Stock

Learn More

C & K Components - 7205MY9AGE Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 5Amp 120VAC.

Actuator: (On)-Off-(On).

Connection: PC Right Angle (RA) Trminals.

Mech: PCB. Body: 12.9mm long x 11.4mm wide x 11.0mm high.

Overall with actuator and contacts 31.2mm long.

Note: Center off.

Non-threaded bushing 6.9mm long.

Actuator: 6.9mm long.

Miniature C&K 7205.

Learn More

JBT - JMT-123 - 5930-00-027-0247 -Switch, Toggle.

Aircraft Toggle Switches - Panel Mount

Contacts: SPDT.

Contacts: Silver

Contact Ratings: 5Amp 125VAC, 3Amp 250VAC.

Actuator: Both Switches are On-On.

Mounting Faceplate 1.317" wide x 3.150" high.

Right Angle Mountable Edge/Flange with 2 holes at 2.15" centers.

Note: Two SPDT Miniature Toggle Switches with only SPST in use.

Assembly marked HI has three wires, LO has 2 wires from switch, joined to a 3 Position male connector.

Proudly Made in USA

Switch Alternates: A123S1YZQE, 7101SYZQ, 7101SYZQE, MST-105D

UPC 0767842189378

NSN: 5930-00-027-0247

Note: Surplus Assembly for a Discontinued Project - New

 

Learn More

Mopar - Chrysler Dodge Plymouth  -  Heater  - Blower Motor Switch, Rocker, Automotive.

Actuator: 4 Position (Off is Open, LO=C TO L, MED= C TO M, HI=C TO M + HI).

Connection: (4 Terminal) Male Quick Connect terminals.

Body: Overall 1.316" long x 1.448" wide x 1" behind panel.

Actuator extends to 1.571" above assembly.

Note: Blower Motor Switch.

Mounted on a plate 1.316" long x 1.448" wide.

Vintage - Genuine Chrsyler Dodge Plymouth - Factory New Old Stock

Similar to 3502681 (1970's Vintage)

Alternate Appplications - Hobbyist Motor/Fan Control

Learn More

Switch, toggle. Contacts: DPDT. Contact Ratings: 5Amp 120VAC/2A 250VAC. Actuator: On-Off-(On). Connection: PC RA terminals. Mech: PCB. Body: 12.9mm long x 11.4mm wide x 11.0mm high. Overall with actuator and contacts 31.2mm long. Note: Center off. Non-threaded bushing 6.9mm long. Actuator: 6.9mm long. Miniature C&K 7207 type. Military NSN 5930-014120241. Connection:2-3,5-6 / Open / 2-1,5-4. Learn More

Switch, toggle. Contacts: DPDT. Contact Ratings: 5Amp 120VAC, 2Amp 250VAC. Actuator: On-On-On. Connection: PC terminals. Mech: PCB or panel, RA leads. Note: Miniature. Learn More

C & K Components - 7201J2ZQE2 Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 5Amp 125V.

Actuator: On-On.

Elect config: Gold/Solder Terminals.

Mech: PCB.

Additional Information: https://www.ckswitches.com/products/switches/product-details/Rocker/7000/

Note: Mini flat paddle. Panel Mount Flange Attachment is not included.

Learn More

C & K Components - 7201SYCGE - Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.

Actuator: On-On.

Connection: PC leads.

Mech: PCB.

Panel hole: 0.502" long x 0.453" wide x 0.377" high.

Threaded bushing 0.350" long.

Actuator 0.412" long.

Note: Miniature. Hardware required, not included.

Made in the USA.

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 15Amp 125VAC/10Amp 250VAC (3/4HP 250VAC). Actuator: On-Off. Connection: Male 1/4" quick connect terminals. Mech: Panel, one hole. Note: Threaded bushing length: 0.512". Actuator length: 0.555". Learn More

Cutler-Hammer / Eaton - 8372K7 - 8372K107 - Switch, Toggle.

This line of switches employs a quick-make/quick-break contact mechanism. The resultant high-speed movement eliminates the “teasing” of the switch and reduces the pitting of the contact surfaces due to arcing. Self-cleaning and wiping contact action assures positive contact on switch operation. These switches are especially suited for use in small motor applications.

Contacts: DPST.

Contact Material: Bronze Silver Plated

Contact Mechanism: Quick-make/quick-break wiping action

Contact Ratings: 6Amp 125VAC, 3Amp 250VDC.

Actuator: On-Off.

Mounting means: Threaded bushing—0.468 in (11.89 mm) dia., 32 threads/inch
Keyway—0.068 x 0.035 in (1.73 x.89 mm) deep, provides anti-rotation feature

Connection: Screw terminals, no hardware. #5-40 X 5/32"

Mech: Panel, Standard 15/32-32 threaded bushing seated 0.540" long.

Body: 1.156" long, plus contacts x 0.689" wide x 0.592" deep, plus contacts.

Note: P/N: 8372K7 is 8372K107.

NSN 5930-00-283-8804

Listed UL/CSA. RoHS Compliant

Made in the USA.

Learn More

Switch, toggle. Contacts: 3PST. Contact Ratings: 15Amp 125VAC, 10A 250V (3/4HP, 250VAC. 1,2 or 3-Phase). Actuator: On-(Mom). Connection: 1/4" QC terminals. Mech: Panel, bushing 3/8". Panel hole: 1.332" (33.8mm) long x 1.095" (27.8mm) wide x 0.773" (19.6mm) high, plus contacts. Note: Both positions maintained. Bushing length: 11.5mm. Actuator length: 17.2mm long. Complete with hardware. Learn More

Cutler-Hammer / Eaton - 7505K6 - Switch, Toggle.

Contacts: SPDT. (1PDT) On-None-On

Contact Ratings: 15Amp 125VAC, 10Amp 250VAC, 3/4HP 250VAC, 1/2HP 125VAC.

Contact Material: Silver-Plated Copper

Actuator: On-None-On.

Orientation: Straight

Mech: Panel, with 1/4" male Quick Connect Terminals.

Threaded Bushing.

Bushing Length: 0.469" (11.91mm)

Lever Length: 0.563" (14.3mm)

Panel Hole: 1.133" long x 0.627" wide x 0.633" high, plus terminals, bushing 0.508" long, plus actuator.

Note: All are new individually packaged with hardware.

Label is marked 7505K6 and 7505K3.

Both positions maintained.

Rohs Compliant

UL Recognized, CSA Certfied

Made in USA

Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 6Amp 125VAC/3Amp 250VAC/ 2.5Amp 125VAC/2Amp 277VAC. Actuator: 2 Position. Connection: screw terminals. Mech: Panel, one hole. Body: 1.315" long x 0.755" wide x 1.037" below panel, including terminals. Note: Threaded bushing length: 0.357" (9.0mm). Actuator length: 0.573" (14.5mm). Made in the USA. Learn More

EATON - CUTLER-HAMMER - 7590K9 - Switch, Toggle.

Contacts: DPST.

Contact Ratings: 6Amp 125VAC/3Amp 250VAC.

Actuator: On-Off-On.

Connection: Male 1/4" spade terminals.

Mech: Panel, one hole.

Body: 1.324" long x 0.750" wide x 1.157" behind panel including terminals.

Note: Threaded bushing length: 0.377".

Actuator length: 0.564".

UL listed, CSA approved.

NSN: 5930007107659

Proudly Made in USA

Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 6Amp 125V AC/DC, 3Amp 250VDC. Actuator: On - Off. Connection: 4 wire leads, 18AWG, 6" long. Mech: Panel mount. Bushing: 3/8" x 0.480" long. Body: 1.156" long x 0.937" x 0.687". Note: Listed: UL/CSA. Learn More

Eaton - Cutler Hammer - 7691K14 Switch, Toggle.

4PST 15Amp 125VAC/10Amp 250VAC, 3/4HP 250VAC.

Threaded bushing 3/8" x 0.463".

Actuator: 0.687" long.

Mount: Panel. Heavy duty.

Termination: 8 Solder Terminals.

Complete with hardware.

Made in USA

Learn More

Switch, toggle. SPDT 10Amp 250VAC. 3 Position, center off, both sides momentary. Bushing length: 1/2". Lever length: 9/16". Contacts: 3 screw terminals. Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 10Amp 115VAC. Actuator: On-Off (Mom). Connection: screw. Mech: Panel. Panel hole: 1.145" long x 0.638" wide x 0.626" high. Standard 15/32" threaded bushing x 0.524" long (seated). Actuator: 0.683" long. Note: Double marked MS35058-25. Complete with hardware. Learn More

Eaton CUTLER-HAMMER - ST42H - 8809K16 Switch, toggle.

Contacts: SPDT.

Contact Ratings: 10Amp 115VAC.

Actuator: On-Off-On (Mom).

Connection: solder.

Mech: Panel.

Panel hole: 1.140" long x 0.631" wide x 0.626" high.

Standard 15/32" threaded bushing x 0.521" long (seated).

Actuator: 0.675" long.

Note: Complete with hardware.

Learn More

Eaton - Cutler Hammer - SF21SCW191 Switch, toggle.

Contacts: Miniature SPDT.

Contact Ratings: 125VAC 5Amp.

Actuator: On-On.

Connection: solder terminals.

Mech: PCB or Panel with threaded bushing.

Bushing length: 0.311".

Actuator length: 0.414".

Complete with hardware.

NSN: 5930-00-270-1674

Learn More

Cutler-Hammer / Eaton - 8282K13 Switch, Toggle.

Contacts: SPDT. Full Size

Contact Ratings: 3Amp 125VAC/1Amp 250VAC.

Connection: Solder Terminals.

Switch Circuit: On - None - On

Mech: One hole threaded bushing mount/panel.

Body: 1.7" long x 0.518" wide x 0.53" high.

Note: Bushing length: 0.385".

Actuator length: 0.482".

New Old Stock - Bulk Packaged from Manufacturer

Made in USA

Learn More