Switches

C & K Components - T203SY9V3GE Switch, toggle.

T-Series Subminiature Toggle Switch

Contacts: DPDT Center-off.

Contact Ratings: 2A 125VAC/28VDC or 0.4VA low level / dry circuit,

Contact Material: Gold over Silver Contacts.

Actuator: On-Off-On.

Connection: Gold over tinned PC pins, Epoxy sealed.

mount: Vertical Mount, V-Bracket

Mech: PCB, bushing is not threaded.

Body: 0.358" x 0.40" x 1.0" above pc board.

Made in USA

HONEYWELL MICRO SWITCH - 11TS1-21 Switch, Toggle, SPST.

MICRO SWITCH TS Series toggles may be used anywhere manual operation is desired. They are an entry-level solution for applications that do not require a sealed toggle switch.

Hermetic and environmentally sealed toggle switches offer enhanced reliability with MICRO SWITCH™ technology. Can be used in a variety of applications where a panel-mount switch with an environment-proof rating is needed, including industrial equipment, military and commercial aviation, agriculture, process control, and medical.

Type: Stainless Steel. Phenolic Toggle

Contacts: SPST, 2 Position Maintained, Silver Cadmium Oxide

Contact Ratings: 15Amp 125, 250, 277VAC (1/2HP 125V, 1HP 250, 277V, 5A 125VAC).

Actuator: Off-On. Maintain/Maintain

Connection: Screw Terminals.

Mech: Panel, Bushing. Lever-to-Bushing Seal

Body: 1.131" (28.7mm) Long x 0.638" (16.2mm) Wide x 0.694" (17.6mm) High.

Threaded Bushing: 1/2" D x 12.3mm long.

Actuator: 17.2mm Long.

Operating Temp.: -54C to 71C (-65F to 160F)

Complete with Hardware.

Listed: UL, CSA, CE

Made in USA

NSN: 5930-00-655-1514

Alternates: 00-00370-08, 0232-5, 09N051N, 11TS1-1, 12521, 144422, 146-007-0001  , 16-02262, 1942198-3, 1942198-3, 21C1596-41, 270-900011-001, 270-900011-011, 3200708-1, 320AS116-8, 34861033, 35058EM, 400004-16, 4101, 4101JT, 411036-21, 511TS1-7, 51590, 567584, 59027-105, 689-209, 7002B53, 7502K12, 7502K13, 7581K4, 7581K5, 7581K6, 7581K7, 7768942PTS, 7800-0042-001, 812031-0021, 82602, 82650, 83004, 86202, 8800K13, 8800K13, 8800K13, 8800K16, 8800K7, 8802K10, 8802K6, 90-333, 9N51N, AN3021-1, CH8800K16, CH8802K10, D72205WG, F611, INR122-123, JAMST42E, L42E, MIL-DTL-83731, MIL-S-83731, MS35058, MS35058-1, MS35058-16, MS35058-21, Q70994-20, RS62, S382-1, SA13, ST40E, ST42E

Honeywell Microswitch - 37XL11YD-43 Switch, Micro. Custom hall Effect Switch with Lever Actuation.

This is a Honeywell 3-pin Micro Switch with Hall Effect Sensor Assembly.

Hall-Effect Switch with Lever.

Connections: 3 Male 3/16" Quick Attach or SOlder Terminals.

Pins: 3-Pin = GND Minus,  +Voltage, Output

Mechanically Operated by magnet inside plunger, has 2" long lever.

Unactuated

Output Voltage Normally High (Off) Solid State Switch for 5VDC. " Minus Plus Zero ".

Dimensions are 1.1"(30mm) x 0.63"(16mm) x 0.40"(10mm). 

Alternate P/Ns: 1589292, A02297

Genuine Honeywell - New Old Stock - Rare

Applications: For Harsh Explosive Operating Environments (Non-Sparking).

Proudly Made in USA

C & K Components - 8125SD9AB - 8125SD9AB8E - Switch, Pushbutton.

Contacts: SPDT, Sealed.

Contact Ratings: 0.4VA 125VAC.

Contact Material: Gold

Actuator: On-Momentary Plunger.

Connection: PC leads.

Mech: PCB Right Angle

Body: 12.9mm long x 6.8mm wide x 10.6mm high.

Miniature, Sealed Contacts.

Bushing: 7.3mm long.

Actuator: 5.7mm long.

Alternate: 8125-SD9-AB-E

Made in USA

UNIMAX - A365A-Y - WD21X10261 - A364090 - AP3994765 Push Button Switch, Interlock.

Heavy Duty Switch, All Purpose Micro Push Button.

Contacts: SPST Normally Open.

Contact Ratings: 125/250VAC 15Amp. 3/4 HP, 125VAC, 1 1/2 HP 250VAC:

1.8" x 0.6" x 0.6" less Quick Connect terminals and push button - 1/4" Quick Connect Terminal at each end.

Mech: Panel, 2 holes at 1" centers.

Button Centered on Mounting Holes.

Panel hole: 1.817" long x 0.625" wide x 0.652" high.

Bulk Packaged

Color: Brown or Black.

Alternate Part Numbers WD21X557 as used in numerous appliances as interlock door switch. Commonly used on GE, Kenmore, Hotpoint, RCA and other appliances such as dishwashers and dryers as a door interlock switch.

Replaces/Alternates/Substitutions: AP3994765, 1263984, AH1481922, EA1481922, PS1481922, WD21X0557, WD21X557, and B00MNMS81Q.

Save Big $$ and repair those appliances yourself.

THERM-O-DISC - 41T14-L160-38116 Press-to-Reset

160 degress F, Normally Closed Contacts

Thermostatic Switch w/Button-on-Flange mounts-on 1.5" slots L160-degrees.

Heavy Duty - Screw Terminals 

Applications: Industrial, Commercial, & Water Heaters

EMERSON THERM-O-DISC - 36TX21-2310-L230-40F - Thermal cut out L230-40F. NC

The 36T series of 1/2'' bimetal snap disc thermostats from Therm-O-Disc offers proven reliability in a compact, versatile, cost-effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC.

Thermostat, thermal cut out. 1/2" (12.77mm) Bimetal Disc. 3/16" blade terminals Straight panel mount connectors.

Normally Closed contact opens at 230 F and closes when temperature drops to 190F.

Snap Action SPST Contacts Automatic Reset

Mount: panel, round 17.7mm with 24mm centers

Two male 3/16” (4.8mm) quick connect Blade Terminals which can also be soldered.

Surface Mount where Blade Terminals are positioned at 90 Degrees

Note: Please see leads on each in photo, 2 different styles.

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

EMERSON THERM-O-DISC - 36TX21 13039 L200-25 - Thermal cut out. L200-25.

The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC.

L200-25 Bi-metal - 1/2" (12.77mm).

Mounted on flange with 15/16" Centers NC opens on temp increase. 

Package: 1/2" (12.77mm), solder terminals.

Two male 3/16” (4.8mm) quick connect Blade/Solder Terminals 

Snap Action SPST Contacts Automatic Reset

Set Point: Normally Closed Contact opens at 200F and closes when temperature lowers to 175 F. 

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

Thermostat, thermal cutout. NO, closes at 225 deg F. Mount: 7/16" bushing/panel mount. Contacts: (2) 1/4" QC terminals, thread = 7/16 - 32. Package: white ceramic, threaded bushing, overall shaft 2-3/4" shaft. Note: No hardware.

RONG FENG CO LTD - SS-160 - Switch, Latching Pushbutton.

Power Amplifier Box Power Switch

DPST Push-On/Push-Off, Latching, 10Amp 250VAC.

Mount: Panel Mount with 2 holes 20mm apart. SDDF/3Type

Material: PBT

Contacts: (4) 1/4" Male Quick Connect Terminals or Solder. (Silver Plated - Tarnishing) 

Approvals: UL/CSA

Applications: Quality Electrical Power Switch, Amplifier Power Switch 

New Old Stock

Made in Taiwan

OAK INDUSTRIES - SERIES 225 / YELLOW LED  Switch, Pushbutton.

Contact Ratings: 100mA 5V.

Actuator: NO.

Mech: Very low profile 0.49" square x 0.225" high .

Pkg of 20.

Note: Keyboard/tactile feedback switch.

Color: Black. Yellow LED.

OAK INDUSTRIES - SERIES 225 KeyBoard Switch - Switch, Pushbutton.

Contact Ratings: 100mA 5V.

Actuator: NO.

Mech: Very low profile 0.49" square x 0.225" high.

Note: Keyboard/tactile feedback switch.

Color: Black. No LED.

Package of 20.

Genuine Vintage Oak Industries - New Old Stock

Carlingswitch - 2GK53-NBL - Model 3XSC1 Switch, Toggle with Paddle.

G Series Toggle Switches Contains a slow-make, slow-break contact mechanism.

Contacts: DPST. Double Pole,  On-None-Off

Contact Ratings: 15Amp 125VAC, 10AMP 250VAC, 1/2 HP 125-250 VAC

Actuator: Nylon Bat Handle. Toggle Length - .687", Bushing Length - .465" 

Use .250" Tab Terminations

Note: With Hardware.

Alternates: 2GK51-NBL3, 35-3150, AML33FBA4AC01

New Old Stock

C & K Components - 7103J60ZMI32 Switch, Toggle/Paddle.

Contacts: SPDT.

Contact Ratings: 5Amp 120V, 2Amp 250V.

Contact Material: Silver

Operating Temperature: -30 C to 85 C

Actuator: On-Off-On.

Connection: PC leads.

Mech: Panel, Snap-in.

Panel Hole: 17mm long x 12mm wide x 17mm behind panel plus contacts.

Note: Red Paddle J60 actuator.

Electrical Life: 40,000 Cycles

Complete with black bezel 19.43mm long x 15.62mm wide.

New Old Stock

C & K Components - 7205MY9AGE Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 5Amp 120VAC.

Actuator: (On)-Off-(On).

Connection: PC Right Angle (RA) Trminals.

Mech: PCB. Body: 12.9mm long x 11.4mm wide x 11.0mm high.

Overall with actuator and contacts 31.2mm long.

Note: Center off.

Non-threaded bushing 6.9mm long.

Actuator: 6.9mm long.

Miniature C&K 7205.

ALPS PN421 - Samwon PPL421 Switch, pushbutton/push switch.

Contacts: 4PDT non-latching momentary. 2 NO and 2 NC

Mechanism design offers acute operation and long service life

Applications: Ideal for mounting on PCB motherboard of many electric appliances

Specifications:

Material: Plastic, Metal

Switch Operation: Latching

Contact Configuration: 4PDT

Terminal Type: Straight Through Hole

Pin Quantity: 12

Each Pin Pitch: 3mm

Position Quantity: 1

Mounting Pillar Distance: 22mm / 0.87-inch

Cap Mounting Part: 6.5 x 3.3mm / 0.26-inch x 0.13-inch(L*W)

Overall Size: 35 x 7.6 x 13mm / 1.38-inch x 0.30-inch x 0.51-inch(L*W*H

New old Stock

Package of 10.

Switch, leaf. Normally open (NO). Dimensions: leaf is 2" long. Overall 2-3/4" long. Mounts with 2 screws through holes 1/8 " D + 3/8 " apart. Gold plated precious metal contacts. 

EMERSON THERM-O-DISC - 36TX22 13038 F230-40 - Thermostat, Thermal Cut out. F230-240, Normally Open.

The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC.

Thermostat, thermal cut out.

Thermostatic switch, bi-metal 1/2" (12.77mm).

Contacts: (2) 0.17" solder term, one on each side. 

Set Point: Normally Open contact closes at 230F and closes when temperature lowers to 190F.

Mount: panel, round 17.7mm with 24mm centers

Two male 3/16” (4.8mm) quick connect Blade Terminals which can also be soldered.

Snap Action SPST Contacts Automatic Reset

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

SWITCHCRAFT - 67031K506A

3 position switch bank WITH KNOBS (3-059 B4-2D)

SMK - XKU1 - Switch, Key, 3  Positions.

SPDT, 3 access levels - Custom-made high quality key switch.

Description:

Lock entrance requires a 15mm hole, mounts on two threaded holes 22 mm on center.

Provided with 3 pairs of functionally different keys: 2 are marked REG, 2 are marked X, 2 are marked Z.

The switch lock cylinder has 5 rotary positions starting fully counter-clockwise numbered 1-2-3-4-5.

The switch contacts consist of a SPDT micro switch.

The micro switch has, a normally open contact and a normally closed contact sharing a common terminal.

The normally-open contact is closed in position 2 only.

The normally-closed contact is opened in position 2 only.

The REG switches can only access positions 1 and 2.

The REG keys are insertable and removable in both positions.

The X keys can only rotate to positions 2-3-4. The X keys are only insertable or removable in position 2.

The Z keys can rotate to all 5 positions, but the Z keys are only insertable or removable in positions 2 and 3.

New Old Stock

NKK - UB15KKW015F-FF - Switch, Illuminated Pushbutton.

SPDT Momentary.

Silver contact rating 5A at 125VAC.

Illumination: LED, green.

Illumination voltage (nominal) 2.25VDC.

Panel mount, snap-in 0.638"square for panel thickness .039" to .126".

Matsushita - S-3 TV-3 ESB-702T-671 -Switch, pushbutton, latching.

Contacts: DPST.

Ratings: 3A 250VAC.

Actuator: push-on, push-off.

Connection: solder terminals.

Mech: panel mount 2 threaded holes 0.80" spacing.

Note: Snap switch.

Use knob #4509, 8-431

JBT - MR1-123 - JBT Switch, Paddle Miniature, Electroswitch B123J2ZQ2.

Status: Discontinued

Contacts: SPDT.

Switch Circuit: On - None - On

Number of Positions: 2 Position

Contact Ratings: 5A 125VAC.

Voltage Rating (DC): 28 V

Contact Material: Silver

Actuator: Paddle. (White)

Connection: Solder PC pins.

Dimensions: Width: 0.47 in, Height: 1.34 in, Length: 0.75 in

Mech: Panel Mount, two holes 0.93" spacing plus two 0.25" spacers, screws & nuts.

Genuine  JBT - New Old Stock

Note: Formerly Eaton (JBT) Now Electroswitch B123J2ZQ2

Alternate: B123J2ZQ2-ND, Allied 70152395

Made in USA