Switches

T-BAR - 902-108C - 108-POLE T-BAR SWITCH NEW

Olympic Controls - 108 Pole Double Throw

3-ganged 36-Pole Switches may be unconnected and used independently.

The 902 series is desinged to switch dry circuits to a maximum 1 amp for use in data. Thermocouple and instrumentations circuits. Terminals are designed to accept T-Bar Connectors or solder holes provided. Protected again normal ambient dust conditions. Designed for use in controlled enviroment such as test areas, computer control rooms, broadcast studios and network management centers.

Connections: Quick Connect

Dimensions: 3.5"L x 2.5"H x 1.4" behind panel, requires three 0.5" mounting holes

Weight:  0.75-lb

New Old Stock 

Made in USA

Learn More

Honeywell/Microswitch - GLBA02B Switch, limit.

Top plunger, 1NC 1NO SPDT Snap Action, 0.5 in - 14NPT conduit.

Housing Material: Zinc

Mechanical Life: 15,000,000 cycles

Mount: Chassis Mount

Current Rating: 6 A

Differential Travel: 9 mm

Operating Temperature: -25 °C to 85 °C

Operating Force: 160 N

Operating Position: 350 mm

Overtravel: 45 mm

Pretravel: 254 mm

Switch Function: On-Mom

Termination: Conduit

Throw Configuration: SPDT

Voltage Rating (AC): 120 V

Voltage Rating (DC): 125 V

Ratings: Dust Tight, IP67. waterproof

Proudly Made in USA

 

Learn More

Switch, limit. Top Roller Plunger, 2NC 2NO DPDT Snap Action, 0.5 in - 14NPT conduit. More info: http://sensing.honeywell.com/index.cfm?ci_id=140301&la_id=1&pr_id=88126 Learn More

Honeywell / Microswitch - GLAA01K8C Switch, Limit. Wobble Stick - Cat Whisker, SPDT Snap Action. 

Technical Specs

Learn More

Honeywell/Microswitch - 2CLSB1A1 Duplex Cable Pull Limit Switch.

For emergency stop applications.

Indicator Voltage: 120 VAC

Heavy duty (Right and Left) microswitch two eye hooks probable use with CLSZ50 cable assembly, conveyor systems/safety item.

The direct acting control circuit contacts are held closed when the cables are under proper tension.

If either cable is pulled, slackened or broken a cam will open the control circuit contacts.

Instruction Sheet, included.

New Old Stock

Weight: 5 lbs.

Learn More

Honeywell/Micro Switch - 104TL226-5 Switch, Toggle.

4PDT (Mom) On/None/Off.

125VAC 7.5Amp/250VAC 6Amp.

Resistive DC: 125V 0.75Amp/250V 0.5Amp/28VDC 7.5Amp.

Inductive load: 125VAC 7.5Amp/28VDC 7.5Amp.

Termination IWTS (16-20AWG) MIL-S-3950.

Threaded bushing length: 0.432".

Actuator length: 0.643".

Operating temperature: -85 to 160 Deg F.

Terminals accept pins M39029/1-101, not included.

Note: Military. Environmentally sealed shaft.

Learn More

Electronic Pressure Monitor LED Display - 1/4"NPT - Instruction sheet included - Adjustable Hysteresis - Switching Output DC PNP N.O. / Closed programmable - Measuring Range 0-100 PSI - Requires 18-30VDC at 250mA - Bursting P 2000 PSI - Has programming buttons - 34mm x 92mm x 48mm - New CE UL CSA GL Made in Germany Learn More

Switch, stepping. Type 44 Switch, 3-deck, 11-position, 1-deck, 10 position, non-shorting wipers, 2 of the 4 decks gold-plated; SPDT interupter contact, 120 ohm coil; will operate switch at 36VDC but rated for 48VDC. In Original Styrofoam box. Learn More

TURCK - Bi15-CP40-AN6X2 - Inductive Switch, Proximity.

10-30VDC 200mA 15mm.

3-Wire DC NPN

Ident Nr.: 16220

NIB.

Note: "Combiprox.

Learn More

Promiximity switch 115VAC 50/60HZ 0.5A Cyl Probe 1.295" metal.

Learn More

NAMCO CONTROLS - EE520-41520 - Switch, Proximity Cylindicator.

Namco is a leader in electro-mechanical and non-contact switching devices for industry, aerospace, defense, marine and nuclear power applications. The product line includes arguably the world's most rugged limit switches for the toughest of environments. For over 25 years, the Cylindicator sensor has been the standard for industrial applications that require end‑of‑stroke indication on Hydraulic and Pneumatic Cylinders.

115VAC 0.5Amp, 1.295" Metal Probe.

Supply Voltage: 95-135.

End Sensing

Cylindicator.

PSI: 300.

Alternate: DANAHER CONTROLS EE520-41520

New Old Stock

UL Listed

Note: Namco, Snap-Lock, Mill-Pack, Hard-Coat, or Dura-Prox, all of which are trade names of NAMCO - a division of Specialty Product Technologies.

Proudly Made in the USA.

Learn More

LEDEX - 5945-636-5462 - B-61986-A - Rotary Solenoid Switch -Motor, Stepper with Switch/Return Spring.

Rotary Selector Features

Compact Design
High Torque to Size
Snap Action On/Off
Return Spring

Type: Base End Shaft, Ratcheting Rotary Solenoid

Supply: 48VDC.

Body Dimensions: 1.90"D x 2.74"H.

Mount: 3 Tapped holes

Weight: 12oz.

With Wafer Switch.

Additional Information: https://www.ermec.com/catalogos/2017/saia/Rotary%20DC%20Solenoids%20mm.pdf

Military NL-71277-3-2, B-61986-A

Made in USA

Learn More

10Amp 600VAC Limit Switch Side Rotary Factory New Manuf bx's.Limit Switch Switch Function:SPDT-1NO/1NC , Contact Rating:10A at 250VDC ,Operating Force Max:0.45N , Over Travel:5 ,Mounting Type:0.5in - 14NPT Conduit, Operating Force:0.45N , Pre-Travel:70 , RoHS - Yes (NO ARM) Learn More

Three phase 60Hz enclosed variable frequency drive bypass system. Inverter Bypass With Overload Protection. 200/208 = 7 1/2HP / 240V = 10HP / 480V = 20HP / 600V = 20HP OVERLOAD AMP RANGE = 22-27 AMPS - Learn More

General Electric - CR174DBP1A1 - PICK UP ON LIGHT

10-30VDC NPN sinks 200mA (Normally Open).

Dimensions: 0.695"diameter x 2.3'' long with3-conductor cable.

Made in Germany for General Electric

New Old Stock

Learn More

Switches, Proximity. Demonstration Kit containing 15 items from the E51 switch line. Rugged construction is ideal for industrial environments. Viton� gaskets ensure a positive seal and high resistance to industry chemicals. Direct replacement for worn out limit switches. Sensor heads and bodies feature captive screws to eliminate loss. All sensor heads include a selector switch to program output function to either N.O. or N.C. Sensor bodies feature bifurcated engagement prongs for a reliable connection when plugging into receptacle stabs. Sensors accommodate both U.S. and DIN mounting dimensions. Wiring terminals feature captive pressure plate saddles for #18 to #12 AWG wire. Logic modules are available to provide additional control function. Case contains: E51SAL, E51DT1, E51RA. E51SAL, E51DS1, E51RAP3. E51RN. E51SNL. E51SPL. E51DS1. E52RAL12T111. E51DS6. E51DT5. E51DT7. E51DT8.

Learn More

Switch, pressure. 125/350VAC 15A, 0.5ADC. Body: 3.5 x 3.6 x 6.8"H. Weight: 2.6 lbs. Single setpoint adjust range: 3 to 100 PSIG. Average deadband: 0.2 to 1 PSIG. Made in USA by Customer Control Sensors. Learn More

ALLEN BRADLEY - AB - 871TM-D5NP18-N4 - AB871TMD5NP18N4 Inductive Proximity Sensor

Bulletin 871TM tubular stainless steel sensors are ideal for harsh or extremely demanding environments. These sensors resist impact, abrasion and corrosion to keep things moving where ordinary sensors grind to a halt. This line features full mechanical seals at all barrel openings and full epoxy encapsulation for optimal performance in the toughest environments.

Size 18mm Diameter

Environmental Conditions - 30 g with 11 ms Shock, 55 Hz 1 mm 3-Planes Vibration

Input: 10-30VDC.

Load: 200mA.

Temperature Rating  -13 to 158

Output: Shielded NO.

Sensing distance: 5mm.

Has a 4 pin DC Micro Quick-Disconnect

Series A.

Listed: UL/CSA.

Learn More

ALLEN BRADLEY - 800MR-N31QB - Key Switch

Contacts: 4 Position. 2 N.C. & 2 N.O.

Termination Type : Stab Termination 

Rating: 300 VAC, 10 Amps Max.

Key Codes: Standard T100

Note: Selector switch, round cylinder lock, key maintained.

Non-illuminated.

Bulletin 800, series C OOXO, OOOX, OXOO, XOOO.

Key is removable only in locked position.

UPC 662073280231

Learn More

Cutler-Hammer / Eaton - 10172H- 10172H 334A - Thermal Overload Switch

Status: Discontinued

Pilot Duty Ratings: 115-230 VAC, 30A

Body Approximate Overall Dimensions: 2.2" x 1.95" X 1.0"

New Old Stock - This Item has no Shelf Life

NSN 5925-00-783-5581

Made in USA

Learn More

Eaton -Arrow Hart - AH7810-UD - Motor Controller, Manual Contactor

Industrial Grade Manual Motor Controllers

Phase: 3 Phase

Poles: 3 Pole

Amperage: 30 Amps

Voltage: 600 VAC

Termination Style: Front Wired Screw

Max. AWG Wire Size: 10 AWG

HP Rating: 7.5@240VAC, 15@480VAC, 15@60VAC  

Dimensions: Height 1.7" X Width 3.7" X Diameter 2.6"

Positive-contact design enhances fast-make/slow-break

Silver-alloy contacts for maximum conductivity and service life

Back and side wire terminals accept up to #10 AWG solid copper wire. For stranded #8 AWG wire, remove terminal clamp and use ring terminal

Oversized #10 triple-combination terminal screws are vibration resistant

All molded parts are thermoplastic to resist impacts, chemicals, temperature, tracking and arcing

Insulating barrier between terminals provide isolation from each phase

Nickel-plated brass mounting yoke for superior corrosion resistance

Large toggle provides positive actuation, even with gloved hand.

Note: Arrow Hart P/N 7810-UD changed to AH7810UD following acquisition by Eaton. 

High Quality Commercial - New Old Stock.

UL Class: UL508

Proudly Made in USA

Learn More

T-BAR - 801-12C28 Power Relay. DC.

The 800 series Dust-Tight Relay is protected against normal ambient dust conditions. It is designed for use in controlled environment such as test areas and network management centres. It is used for control interlock and indicator circuits. The connectors are a vital part of T-Bar switching technology. While T-Bar Connectors are recommended, all terminals of T-Bar relays and switches are solderable.

Coil: 28VDC.

Coil Resistance:258 Ohms

Mount: Chassis

Electrical Configuration: 12P2T.

Uses gold contact for parts.

Used / Removed from Equipment

Old - Sold As Is old AS-Is.

Learn More

Pressure Switch Class 9012 Series C - Operating Range: 20-1000-psig [14-69 bar] Max allowable 10,000-psig [689bar] Factory Set Operating Point: ON DECREASING 500-psig [ "for use on vessels greater than 65' long" ] Switch 600VAC/DC UL CSA CE 3.5" x 2.6" x 6.4" long - Learn More

Inductive Limit Switch 40mm Sensing Range 10-30VDC 200 mA Non Flush Mountable - PG13.5 Conduit entrance - N.O. Output - PNP Learn More