DC

Deltron - MPS2 - 9139 X - Linear Triple Output Power Supply, OEM Linear Open Frame.

Triple Outputs: 5 VDC/7A; 12V DC/1A; 9 VDC/1.2A.

Input Voltages: 115/230 VAC.

115VAC - Jump 1 To 2 & 3 To 4
230VAC - Jump 2 To 3
Input Terminals 1 & 4

Dimensions: 9" x 4.875" x 3.25".

New Old Stock -Discounted and difficult Power Supply to find. Priced below repair cost.

Packed 8 lbs.

COTEK ME-1200-60 AC to DC Power Supply 60V 20 Amp 1200W

Cotek Series ME medical power supplies feature class II isolation level. These power supplies can be installed into patient contact medical equipment and still comply with Class B per EMI regulations. Standard functions include short circuit, overload, overvoltage and overtemperature protections. General medical or industrial usage that requires low leakage current, general electronic applications, and low profile IT equipment are all suitable for integrating these on-board type PSU onto the main control PCB of the final system.

Both output voltage and current of the 1200W models are fully programmable from 0 to 105%. The 1200W models also feature constant current limit, Selectable +5V/0.5A or +8V/0.3A auxiliary output, global control via RS232, forced current sharing for parallel operation, remote access via RS232, 485 & I²C, Power OK signal, remote ON/OFF, and remote sense. Protections include overvoltage, overload, overtemperature and fan failure. 

Features:

• Universal AC input / Full range
• Protection:Cotek ME-1200: overload, overtemperature, short-circuit, fan failure
• Medical Safety Approval: ANSI / AAMI ES 60601-1 /
• TÜV EN 60601-1: 2006; IEC 60601-1 / MOPP
• Programmable output Voltage (0% - 105%) 
• Programmable output Current (0% - 105%) 
• Constant current limit 
• Selectable +5V / 0.5A or +8V / 0.3A auxiliary output
• Global control via RS232
• Forced current sharing for parallel operation
• Remote setting multiple PSU via RS232, RS485 & I²C 
• Power OK signal (Power good, Logic low) 
• Remote ON / OFF, Remote sense functions 
• RoHS Compliant
• Protections: overvoltage, overload, overtemperature, fan failure
• 

XENTEK INC - XP15-5

Power Supply 5/6 V @ 3A

Open Frame Regulated Power Supply

Made in USA

THOMSON TUBES ELECTRONIQUES - TH7122A - Power Supply.

High Voltage Alimentation Power Supply

Approximate Dimensions: 9" x 4 1/2" X 2"

Manufactured for Picker International / Marconi Medical Systems.

Made in France

New Old Stock

SYSTEM CONNECTION - AD-41090500 Power Supply.

AC Adapter. 9VDC 500mA.

Input: 120VAC 60Hz 0.1Amp.

Package: Enclosed Wall Mount.

Complete with 6-1/2 foot cord and a 5.4mm barrel cord end connector.

P/S: Center Positive.

Listed: UL/CSA.

SWITCHING SYSTEMS INTERTERNATIONAL - STV175-1220 - 20-0009-015 B - Multi Voltage Switch Power Supply.

Designer and manufacturer of mid-range switch mode power supplies.

Status: Discontinued

Input Power: 120/240VAC 50/60 Hz, 4 Amp.

Power: 185W

Three Outputs: 5VDC @ 25Amp, 12VDC @ 5Amp, 12VDC @ 5Amp.

Open Frame with Wiring Harness.

Dimensions: 12" Long x 5" Wide x 2-1/3" High.

SSI P/N: 20-0009-015 B

Customer P/N: 30-11-1

Note: XPiQ Acquires Switching Systems International in April 2002.

Approvals: UL, CSA

New Old Stock

POWER ONE - HB15-550 - HB15-1.5 - Linear Power Supplies, DC.

Output: 15VDC 1.5Amp.

Input: 100-240 VAC, 47-63 Hz

With Overvoltage Protection Option

Open Frame.

Approvals: UL, CSA

Used/Removed from equipment.

Phoenix Contacts - CM62-PS-120AC/24DC/1-GN - Power Supply.

Status: Discontinued

Input Voltage: 120VAC 50/60 Hz, Fuse 1.0AT 

Output Voltage/Current Ratings: 24VDC 1Amp.

Regulated.

Note: 2941264.

Phoenix Contact - CM175-PS-120AC/24DCU/10 (CM175PS120AC24DCU10) - Compact Process Control Power Supply.

Low 5% Ripple Din 19240

Power Supply Output 24VDC 10Amp output,

Input 120VAC Iinput 50/60 Hz. Inrush current approx. 3.0A

Poweer consumption  Approx. 370 VA

Efficiency >/= 0.80

Input Fuse 7 At

Ul198G

Dimensions 175X155X183 MM

Weight 6.6 kG

DIN-Rail mount.  Retails for nearly $2000

Detailed Specifications https://datasheet.octopart.com/2940443-Phoenix-Contact-datasheet-13076715.pdf

Phoenix Contacts - CM125-PS-120AC/5DC/5 - Power Supply

5 VDC/5A Regulated

Input: 120 VAC 

Eenclosed

Terminal block Connections

DIN rail mounting.

New

Modern Industries Signal Equipment - 8106-02 SR2 Signal Rectifier Unit.

Constant current battery charger for 1 or 2 Lead Acid or Ni-Cad Cells.

Output: 1-5VDC, 0 to 5Amps.

Input. 115VAC 60Hz, SR2.

Operating Temperature: -40 to 71 Deg C.

Mount: Panel - shelf, with flange 4 holes at 8-5/8" centers.

Commercial Quality

Dimensions: 6" high x 8-1/2" wide x 6-7/8" deep.

Weight: 8 lbs.

Proudly Made in USA