DC

Power supply, switcher. +3.3VDC at 19.5Amps and +12VDC at 3Amp Max. 82Watt Max OUT - INPUT: 100-240VAC~2.3A 60/50Hz 6" x 4" x 1.3"High Weighs just under one pound. 2-pin Input and Three Terminal Output, prewired with Four +3.3V leads, Four Black Common leads and two +12V leads into 12-pin connector. Two pin Power Input - Beautiful NEW Switcher !!! UL-CE-TUV APL Approved.

GOULD - LMGT150/15 - 5V@20A 2X 12-15V@1.75A 

SWITCHER Power Supply

OPEN FRAME

3P PACIFIC POWER PRODUCTS - KPT230C-49 Power Supply.

ATX 1U Computer switching

230W Max Out

+5V@25A, +12V@9Amp, +3.3V@15Amp and -12V +5Vsb @ 1Amp each.

Wire-Harness w/ 6 Molex Connectors.

IEC power cord receptacle input 120/230VAC 50/60Hz

AutoSelect.

Total power on +5 and +3.3V is 125W max, Fan Cooled.

Dimensions: Approximately 9" x 4" x 1.5".

Weight: 3.2 lbs.

New Old Stock

More Info: www.pcguide.com/ref/power/sup/partsMotherboard-c.html

WEHO - S-400-24 - Power Supply, DC, Switching. 400 Watt, 24 VDC, 17 Amp

Connect this unit to 110 or 220 Volts AC household power, and it will supply 400 Watts at 24 Volts DC and 17 Amps.

This power supply has been engineered specifically for use with DC motors. Most power supplies designed for use with LED lighting or other electronics will simply shut down when exposed to the high current demands of motors. Built-in current limiting protects the unit from overloads and short circuits. The current limiting feature enables these power supplies to keep functioning through the high-current start-up surges from motors. AmpFlow power supplies will just limit the current to the rated maximum even when a larger load is called for, (like when a DC motor starts up). Also, inductive loads (like motors) can cause damage to power supplies that are not designed for them.

These power supplies also work well in any application where AC line voltage needs to be converted to DC voltage. Other uses include LED lighting, HAM radio, battery charging, and replacing plug-in AC adapters when more power is required.

Short-circuit and overload protections help these units survive harsh operating conditions. The power supply shuts down temporarily if the temperature, current, or voltage goes beyond the safe operating range, and it starts up again automatically when the condition goes away – no rebooting is necessary.

This high-efficiency power supply has an output voltage that is adjustable by plus or minus 10%. It includes an EMI filter to minimize interference with radio signals and a soft-start circuit that reduces the AC inrush current peaks. Every power supply goes through a full-load burn-in test, so no defective unit leaves the factory.

DC output voltage: 24V

DC output current: 17A

DC output voltage error: ±1%

Ripple & noise: 150mV

Efficiency: 86%

AC input voltage range: 85-132VAC/170-264vac 47-63HZ 

Input current: 6.5A/115V 4A/230V

AC inrush current: Soft-Start Current 25A/115V 50A/230V

Leakage current: 3.5mA/240VAC

DC adjustable range: ±10% rated output voltage

Over load protection: 105-135% cut off the output auto -recovery

Over-voltage protection: 115-135 cut off the output auto -recovery

Setup rise hold up time: 200ms 50ms 20ms

Withstand voltage: I/P-O/P:1.5KVAC 1minute, I/P-FG:1.5KVAC 1minute, O/P-O/P:0.5KVAC 1minute

Withstand temperature: -10°C~+60°C,20%-90% RH

Dimensions: 8.5" X 4.5" X 2.0"

Weight: 1.05kg (2 Pounds)

This unit meets all the following safety and EMC standards: UL 1950, EN60950, EN55022, IEC100-3-2, CE, ROHS

Applications: Motor Controllers, CNC, Industrial Automation, LED Strip Lights, CCTV Power Supply , AC/DC Adapter.

Alternates: AmpFlow S-400-24, Meanwell 2-400-24, Mulview S-400-24, Mingwei S-400-24

Factory New

Power One - HCAA-60W-A - Power Supply, DC.

Triple Output, Linear Regulated Power Supply

Input: 100/120 through 230/240 VAC 47-63 Hz

Output: 5/12/12VDC 5V @ 6A & 12-15V @ 1A & -12-15V @1A OR -5V @ 0.4A.

Open Frame Design.

Note: Used/Unsoldered and removed from new equipment.

Tested. Excellent Condition.

Dimensions: H 4.9" x W 9" x D 3.2", 6lb, 14 oz.

Power Supply, DC.

Note: Negative output useable @ -5V 0.4Amp by jumping E1 to E2 and resetting R33. Open frame.

Note: Used/Cut Leads removed from Equiment - Older/As Is. 

(For New/Better Condition but more expensive units see SKU 172352.)

Proudly Made in USA

POWER ONE - HA5-1.5/OVP-A - Power Supply.

Status: Discontinued

Output: 5V 1.5Amp.

Open frame.

More info: http://www.power-one.com/sites/power-one.com/files/lin_99.pdf

5VDC@3A OR 6VDC@2.5A OUTPUT - 115VAC 47-420 Hz 0.50A