DC

LAMBDA - KWS15-12 - 12VDC @ 1.3AMP

Sealed Modular

PC Mount 120/250Vac-In MFG.

NEMIC/LAMBDA

Power supply, switcher. +3.3VDC at 19.5Amps and +12VDC at 3Amp Max. 82Watt Max OUT - INPUT: 100-240VAC~2.3A 60/50Hz 6" x 4" x 1.3"High Weighs just under one pound. 2-pin Input and Three Terminal Output, prewired with Four +3.3V leads, Four Black Common leads and two +12V leads into 12-pin connector. Two pin Power Input - Beautiful NEW Switcher !!! UL-CE-TUV APL Approved.

GOULD - LMGT150/15 - 5V@20A 2X 12-15V@1.75A 

SWITCHER Power Supply

OPEN FRAME

3P PACIFIC POWER PRODUCTS - KPT230C-49 Power Supply.

ATX 1U Computer switching

230W Max Out

+5V@25A, +12V@9Amp, +3.3V@15Amp and -12V +5Vsb @ 1Amp each.

Wire-Harness w/ 6 Molex Connectors.

IEC power cord receptacle input 120/230VAC 50/60Hz

AutoSelect.

Total power on +5 and +3.3V is 125W max, Fan Cooled.

Dimensions: Approximately 9" x 4" x 1.5".

Weight: 3.2 lbs.

New Old Stock

More Info: www.pcguide.com/ref/power/sup/partsMotherboard-c.html

Inventronics - EUC-150S070ST - LED Driver, 150W Constant Current Type

The EUC-150SxxxST Series operate from a 90 ~ 305 Vac input range. These units will provide up to a 5.95 A of output current and a maximum output voltage of 428 V for 150 W maximum output power. They are designed to be highly efficient and highly reliable. The standard features include lightning protection, over voltage protection, short circuit protection, and over temperature protection.

Input Voltage / PFC: 90 ~ 305 Vac / 0.99 (typical)

Output Voltage: 128 ~ 214 VDC, 1.05A 150 Watt Constant Current

Ultra High 92% Efficiency

Active Power Factor Correction (0.99 Typical)

Constant Current Output

Lightning Protection

Fully encapsulated with waterproof IP67 level compliant

Reliability Protections: OVP, OTP, SCP

Safety Regulation: Comply with UL8750 & EN61347

MTBF: 300,000 hrs @ 25ºC, full load, 110 Vac input

Lifetime: 80,000 Hrs @ 110 Vac Input, 80% load, 25ºC ambient Temp.

Inventronics - EUC-150S070STA - LED Driver, 150W Constant Current Type

The EUC-150S070STA LED Driver is a 150W, constant-current LED driver that operates from 90-305 Vac input with excellent power factor. It is created for high bay, tunnel and roadway lights. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature.

Input: 100-240VAC/277VAC.

Output: 107 - 214 VDC Output.

High Efficiency (Up to 93%)
Constant Current Output
0-10V Dimming Control
Input Surge Protection: 4kV line-line, 6kV line-earth
All-Around Protection: OVP, SCP, OTP
Waterproof (IP67) and UL Dry / Damp / Wet Location
SELV Output
TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location
UL Type TL (Temperature Limited)

WEHO - S-400-24 - Power Supply, DC, Switching. 400 Watt, 24 VDC, 17 Amp

Connect this unit to 110 or 220 Volts AC household power, and it will supply 400 Watts at 24 Volts DC and 17 Amps.

This power supply has been engineered specifically for use with DC motors. Most power supplies designed for use with LED lighting or other electronics will simply shut down when exposed to the high current demands of motors. Built-in current limiting protects the unit from overloads and short circuits. The current limiting feature enables these power supplies to keep functioning through the high-current start-up surges from motors. AmpFlow power supplies will just limit the current to the rated maximum even when a larger load is called for, (like when a DC motor starts up). Also, inductive loads (like motors) can cause damage to power supplies that are not designed for them.

These power supplies also work well in any application where AC line voltage needs to be converted to DC voltage. Other uses include LED lighting, HAM radio, battery charging, and replacing plug-in AC adapters when more power is required.

Short-circuit and overload protections help these units survive harsh operating conditions. The power supply shuts down temporarily if the temperature, current, or voltage goes beyond the safe operating range, and it starts up again automatically when the condition goes away – no rebooting is necessary.

This high-efficiency power supply has an output voltage that is adjustable by plus or minus 10%. It includes an EMI filter to minimize interference with radio signals and a soft-start circuit that reduces the AC inrush current peaks. Every power supply goes through a full-load burn-in test, so no defective unit leaves the factory.

DC output voltage: 24V

DC output current: 17A

DC output voltage error: ±1%

Ripple & noise: 150mV

Efficiency: 86%

AC input voltage range: 85-132VAC/170-264vac 47-63HZ 

Input current: 6.5A/115V 4A/230V

AC inrush current: Soft-Start Current 25A/115V 50A/230V

Leakage current: 3.5mA/240VAC

DC adjustable range: ±10% rated output voltage

Over load protection: 105-135% cut off the output auto -recovery

Over-voltage protection: 115-135 cut off the output auto -recovery

Setup rise hold up time: 200ms 50ms 20ms

Withstand voltage: I/P-O/P:1.5KVAC 1minute, I/P-FG:1.5KVAC 1minute, O/P-O/P:0.5KVAC 1minute

Withstand temperature: -10°C~+60°C,20%-90% RH

Dimensions: 8.5" X 4.5" X 2.0"

Weight: 1.05kg (2 Pounds)

This unit meets all the following safety and EMC standards: UL 1950, EN60950, EN55022, IEC100-3-2, CE, ROHS

Applications: Motor Controllers, CNC, Industrial Automation, LED Strip Lights, CCTV Power Supply , AC/DC Adapter.

Alternates: AmpFlow S-400-24, Meanwell 2-400-24, Mulview S-400-24, Mingwei S-400-24

Factory New

International Power Sources - IHN24-3.6 - POWER SUPPLY

Output Power: 86 W      

Input Voltage: 100 VAC, 120 VAC, 220 VAC, 230 VAC to 240 VAC

Number of Outputs: 1 Output   

Output Voltage-Channel 1: 24 VDC          

Output Current-Channel 1: 3.6 A              

Mounting Style:Chassis

Dimensions: Length: 177.8 mm, Width: 123.7 mm, Height: 81.28 mm      

Open Frame/Enclosed: Open Frame       

Industry: Industrial         

Input Frequency: 47 Hz to 63 Hz

Brand: International Power        

Load Regulation: Regulated        

Product Type: Linear Power Supplies      

Unit Weight: 6.614 lbs

Proudly Made in USA

INTER'L POWER - IHB12-1.7 - Power supply, DC. Linear

12VDC 1.7Amp 20watt

Input Voltage: 100 VAC, 120 VAC, 220 VAC, 230 VAC to 240 VAC,

Number of Outputs: 1, Output Voltage (Channel 1): 12V, Output Current (Channel 1): 1.7 A

Chassis mount open frame.

More info: http://www.internationalpower.com/cases.html#b

Hewlett Packard - 9100-5128 - Power supply, AC adapter. Input: 220VAC 50Hz 105mA 23VA. Output: 30VDC 400mA 12 watt. Deck top. Model: C2180A. Note: Double marked Lucent 3502F. Complete with huge 3 conductor male (round pins) input power cord (Mayor MP234BS546) and a 6 foot 2 conductor output cord and a female 6.5mm OD, 3.0mm ID barrel connector. Power supply module for HP printers. Manufactured in Mexico.

Power One - HCAA-60W-A - Power Supply, DC.

Triple Output, Linear Regulated Power Supply

Input: 100/120 through 230/240 VAC 47-63 Hz

Output: 5/12/12VDC 5V @ 6A & 12-15V @ 1A & -12-15V @1A OR -5V @ 0.4A.

Open Frame Design.

Note: Used/Unsoldered and removed from new equipment.

Tested. Excellent Condition.

Dimensions: H 4.9" x W 9" x D 3.2", 6lb, 14 oz.

Power Supply, DC.

Note: Negative output useable @ -5V 0.4Amp by jumping E1 to E2 and resetting R33. Open frame.

Note: Used/Cut Leads removed from Equiment - Older/As Is. 

(For New/Better Condition but more expensive units see SKU 172352.)

Proudly Made in USA

POWER ONE - HA5-1.5/OVP-A - Power Supply.

Status: Discontinued

Output: 5V 1.5Amp.

Open frame.

More info: http://www.power-one.com/sites/power-one.com/files/lin_99.pdf