DC

LAMBDA - KWS15-12 - 12VDC @ 1.3AMP

Sealed Modular

PC Mount 120/250Vac-In MFG.

NEMIC/LAMBDA

Inventronics - EUC-150S070ST - LED Driver, 150W Constant Current Type

The EUC-150SxxxST Series operate from a 90 ~ 305 Vac input range. These units will provide up to a 5.95 A of output current and a maximum output voltage of 428 V for 150 W maximum output power. They are designed to be highly efficient and highly reliable. The standard features include lightning protection, over voltage protection, short circuit protection, and over temperature protection.

Input Voltage / PFC: 90 ~ 305 Vac / 0.99 (typical)

Output Voltage: 128 ~ 214 VDC, 1.05A 150 Watt Constant Current

Ultra High 92% Efficiency

Active Power Factor Correction (0.99 Typical)

Constant Current Output

Lightning Protection

Fully encapsulated with waterproof IP67 level compliant

Reliability Protections: OVP, OTP, SCP

Safety Regulation: Comply with UL8750 & EN61347

MTBF: 300,000 hrs @ 25ºC, full load, 110 Vac input

Lifetime: 80,000 Hrs @ 110 Vac Input, 80% load, 25ºC ambient Temp.

Inventronics - EUC-150S070STA - LED Driver, 150W Constant Current Type

The EUC-150S070STA LED Driver is a 150W, constant-current LED driver that operates from 90-305 Vac input with excellent power factor. It is created for high bay, tunnel and roadway lights. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature.

Input: 100-240VAC/277VAC.

Output: 107 - 214 VDC Output.

High Efficiency (Up to 93%)
Constant Current Output
0-10V Dimming Control
Input Surge Protection: 4kV line-line, 6kV line-earth
All-Around Protection: OVP, SCP, OTP
Waterproof (IP67) and UL Dry / Damp / Wet Location
SELV Output
TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location
UL Type TL (Temperature Limited)

International Power Sources - IHN24-3.6 - POWER SUPPLY

Output Power: 86 W      

Input Voltage: 100 VAC, 120 VAC, 220 VAC, 230 VAC to 240 VAC

Number of Outputs: 1 Output   

Output Voltage-Channel 1: 24 VDC          

Output Current-Channel 1: 3.6 A              

Mounting Style:Chassis

Dimensions: Length: 177.8 mm, Width: 123.7 mm, Height: 81.28 mm      

Open Frame/Enclosed: Open Frame       

Industry: Industrial         

Input Frequency: 47 Hz to 63 Hz

Brand: International Power        

Load Regulation: Regulated        

Product Type: Linear Power Supplies      

Unit Weight: 6.614 lbs

Proudly Made in USA

INTER'L POWER - IHB12-1.7 - Power supply, DC. Linear

12VDC 1.7Amp 20watt

Input Voltage: 100 VAC, 120 VAC, 220 VAC, 230 VAC to 240 VAC,

Number of Outputs: 1, Output Voltage (Channel 1): 12V, Output Current (Channel 1): 1.7 A

Chassis mount open frame.

More info: http://www.internationalpower.com/cases.html#b

Hewlett Packard - 9100-5128 - Power supply, AC adapter. Input: 220VAC 50Hz 105mA 23VA. Output: 30VDC 400mA 12 watt. Deck top. Model: C2180A. Note: Double marked Lucent 3502F. Complete with huge 3 conductor male (round pins) input power cord (Mayor MP234BS546) and a 6 foot 2 conductor output cord and a female 6.5mm OD, 3.0mm ID barrel connector. Power supply module for HP printers. Manufactured in Mexico.

POWER ONE - HC5-6/OVP-A - Industrial Linear Power Supply.

Power your device with direct current by using this HC5-6/OVP-AG AC to DC power supply from Bel Power Solutions to convert an alternating current source to a direct current supply. It has a voltage of 5 V. This part's single output can handle a current up to 6 A. This part has a temperature range of 0 °C to 70 °C.

Input Power: 87 to 110,104 to 132,191 to 242,209 to 264 VAC

Output: 5VDC 6Amp with OverVoltage Protection.

Power: 30 W

Connections: Pin Termainal Block

Open Frame.

Isolation Voltage: 3kV

Dimensions: 142.75 x 123.7 x 74.93 mm

Approvals: Approved to the latest edition of the following standards; UL/CSA60950-1 2nd, IEC60950-1 2nd and EN60950-1 2nd.

Used / Removed from Equipment - Good Condition.

Quad out put power supply. +5 at 20 Amps, +12 at 4 Amps, +12 at 1.5Amps,and Neg 12 at 1.5 Amps.