DC

KEPCO - OPS-5000 Power Supply

Kepco OPS Series Power Managers are high voltage 20-, 25-, and 35-Watt fast programmable power supplies, which can stabilize a voltage or current against the effects of load, source, or temperature changes, yet respond with agility to programming signals requiring swift changes in output. A built-in uncommitted amplifier can be used for summing, scaling, and programming by passive resistance.

AC Line Input Voltage: Universal / 100 V to 240 V /1 Ph

Display / Meter Type:  Analog Meter

Instrument Profile:  Benchtop – Rack Mountable

Number of Outputs: 1

Rated Output Power (Watts): 25 W

Maximum DC Current: 5 mA DC

Maximum DC Voltage: 5 kV DC

Additional Information: http://www.kepcopower.com/

 

Learn More

NJE Corporation - A T.D.C. Company - RSE 10/OVP -  Power Supply Extremely Heavy Duty - New

Large External Heat Sink

P/N 1945105A64, Serial X710-1

Manufactured for Bailey Meter/Bailey Controls

Approximate Dimenasions: 12" X 7.5" X 5"

Boxed Dimensions: 15"X 10" X 8" 35 pounds

Prouldy Made in USA 

New

Learn More

PIONEER MAGNETICS - PM3178A-2-4 Switching Power Supply.

CH1: 5D40-0-2F-4-5L-25-LRF-S,CH2: 5D20-0-3S-25, CH3: 12D20-0-3S-25,CH4: 12D20-0-3S-25

Input: 230V 50/60Hz 13Amps.

Output#1 5V 300A Option-0-1-4-8T-LRFS.

Output#2 5.2V 40A Option-0-3S-61

Output#3 12V 20A Option-0-3S

1500 Watts

UL CSA TUV LR37127

Level 5 about 12x8x5" 14#

Component Type Custom Rectifier with Protection

Fan Cooled.

Prouldy Made in USA 

Learn More

Power supply. IMP configurable. 60V 3.5Amp, 60V 3.5Amp, 15V 14Amp, 15V 14Amp, 5V 35Amp. Max output power 750/1100 watt. Input: 100~240V 12Amps-Max 50/60/440Hz. Dimensions: 5 x 11 x 2.5". Weight: 5.5 lbs. Emerson Network Power Intelligent MP-series. Rohs compliant. Note: Very clean. May in fact be gently used. Learn More

COTEK ME-1200-60 AC to DC Power Supply 60V 20 Amp 1200W

Cotek Series ME medical power supplies feature class II isolation level. These power supplies can be installed into patient contact medical equipment and still comply with Class B per EMI regulations. Standard functions include short circuit, overload, overvoltage and overtemperature protections. General medical or industrial usage that requires low leakage current, general electronic applications, and low profile IT equipment are all suitable for integrating these on-board type PSU onto the main control PCB of the final system.

Both output voltage and current of the 1200W models are fully programmable from 0 to 105%. The 1200W models also feature constant current limit, Selectable +5V/0.5A or +8V/0.3A auxiliary output, global control via RS232, forced current sharing for parallel operation, remote access via RS232, 485 & I²C, Power OK signal, remote ON/OFF, and remote sense. Protections include overvoltage, overload, overtemperature and fan failure. 

Features:

• Universal AC input / Full range
• Protection:Cotek ME-1200: overload, overtemperature, short-circuit, fan failure
• Medical Safety Approval: ANSI / AAMI ES 60601-1 /
• TÜV EN 60601-1: 2006; IEC 60601-1 / MOPP
• Programmable output Voltage (0% - 105%) 
• Programmable output Current (0% - 105%) 
• Constant current limit 
• Selectable +5V / 0.5A or +8V / 0.3A auxiliary output
• Global control via RS232
• Forced current sharing for parallel operation
• Remote setting multiple PSU via RS232, RS485 & I²C 
• Power OK signal (Power good, Logic low) 
• Remote ON / OFF, Remote sense functions 
• RoHS Compliant
• Protections: overvoltage, overload, overtemperature, fan failure
• 

Learn More

THOMSON TUBES ELECTRONIQUES - TH7122A - Power Supply.

High Voltage Alimentation Power Supply

Approximate Dimensions: 9" x 4 1/2" X 2"

Manufactured for Picker International / Marconi Medical Systems.

Made in France

New Old Stock

Learn More

Phoenix Contact - CM175-PS-120AC/24DCU/10 (CM175PS120AC24DCU10) - Compact Process Control Power Supply.

Low 5% Ripple Din 19240

Power Supply Output 24VDC 10Amp output,

Input 120VAC Iinput 50/60 Hz. Inrush current approx. 3.0A

Poweer consumption  Approx. 370 VA

Efficiency >/= 0.80

Input Fuse 7 At

Ul198G

Dimensions 175X155X183 MM

Weight 6.6 kG

DIN-Rail mount.  Retails for nearly $2000

Detailed Specifications https://datasheet.octopart.com/2940443-Phoenix-Contact-datasheet-13076715.pdf

Learn More

Power Supply, Modular. Output: 5VDC@80A . Input Voltage Range: 105-132 VAC 45-440Hz. Operating Mode: Linear. Overall Power Rating: 1300 VA. Load Regulation: 0.03% + 3mV. Line Regulation: 0.05% + 4mV. Operating Temperatures: -21degC to +71degC. Packaging Style: 19-inch rack mount. Size: 5-3/16" x 19" x 16-1/2". Weight: 72 lbs (84 lbs shipping). Meters: Voltage and Current. Output Connections: Barrier block screw terminals. Input Connections: Barrier block screw terminals. Note: Remote Programming by Resistance 200 ohms/volt.

Learn More

Rack mounted, Black, Two panel meters.

Learn More

POWER SUPPLY 0-300V 0-8A METERED 208/230VAC IN SOLD AS-IS NOT Functioning.. Needs Repair.

Learn More

POWER ONE - NHS3011-C0014 - 10A0067-000 - 27.4VDC @ 70A.

Moduar Switch Mode Power Supply

Factory New in Manufactures Packaging

Learn More

5VDC @ 31A. POWER SUPPLY

Learn More

LAMBDA - LT802 - Power Supply, DC. 0-18VDC

Input: 187-242VAC18A-rms, 1985 Watts.

Digital Meter Readout - Constant Voltage or Constant Current, Automatic CrossOver.

0-18VDC 5%-100% of 70Amps 40C - 52Amps at 60degC 40A 71C-ambient.

Line & Load Regulation: 0.02% + 2mV. Remote Voltage or Resistance Programming.

Remote sensing.

Fan-cooled.

Thermal Protection Ocerload Protection, Overvoltage Protection, Inrush Current Limiting.

Half the size, one third the weight of equivalent SCR-series supplies, only 30-pounds.

LT-800 Series Net Weight 30 lbs, Shipping Weight 37 lbs

Dimensions 5 3/16 X 8 3/8 X 19 3/16

Soft-start circuit.

New Factory Cost was over $2,100

Proudly Made in USA

New Old Stock

Learn More

LAMBDA - LK-362FM-OV-7599 - LAB POWER SUPPLY - 0-60 VDC, 0 - 25 A

• Convection-cooled, no blower, no external heat sinking
• No voltage spikes or overshoot on turn-on, turn-off, or power failure
• Series/Parallel operation
• Constant voltage/constant current
• Remotely programmable all models, by voltage or resistance
• Current:
  • 25.0 AMP @ 40 degrees C
  • 24.0 AMP @ 50 degrees C
  • 22.0 AMP @ 60 degrees C
  • 19.0 AMP @ 71 degrees C

Regualtion: 0.015% OR 1Mv

Ripple (rms) 500Uv

Analog Meters 

Dimensions: 7" X 19" X 18 1/2"

Net Weight 135 lbs, Shipping Weight 170 lbs

Factory New Price was $3067

Made in USA

Learn More

Power supply, Laboratory, programmable for automatic testing systems. 0-55VDC 0-20Amp. V&I. Adj. Digital meter. Sold as is. Corrected shipping charges will be required when ordered. Over-voltage Crowbar protection 120/240VAC input, (1000 watt). Learn More

KEPCO - PRM12-5 (-50) - Power Supply, DC.

These units are modular ferroresonant MIL-STD-461-compliant voltage stabilizers which obtain their source-isolated, overload-protected output from Kepco's proprietary transformer, Flux-O-Tran. This design lends itself to custom volt-ampere combinations, consult factory. The low cost, highly dependable ferroresonant stabilizing technique provides extraordinary isolation from a wide variety of source noise. The d-c output is inherently short-circuit proof and cannot expose delicate loads to over-voltage hazards.

12VDC 5Amp, 60Watt Size-D

• Modular ferroresonant voltage stabilizers
• High efficiency 65-75%.
• No overvoltage risk.
• Current limited.

PRM 60 Series

Input: 115VAC.

New in Manufacters Packaging with Instruction Manual

Note: Kepco Price $1079.

More info: http://www.kepcopower.com/prmmod.htm

Learn More

0-60V 0-10A 200W SYSTEM POWER SUPPLY HPIB (option 001) UnMetered Learn More

Hewlett Packard - 6453A - 0-15VDC 200Amp Lab Power Supply Maximum Output Voltage: 15.00 VDC Maximum Output Current: 200.0 Amps Maximum Output Power: 3.00 kW Up to 75% efficiency at full output Regulation: 0.2% Regulation Modes: Constant Current, Constant Voltage Pamel Meters: Analog Internal Overvoltage Protection Power Requirements: 208 VAC 60 Hz 3 Phase Dimensions: 19” Width x 23” Depth X 14” Height 200Amp 0-15VDC @ 0-200Amps CC/CV VOLTAGE & CURRENT Adjustable & Metered 3-Phase 4-Wire input 19" Rack Mount Weighs 250 lbs Before Packing Learn More

0-60V 0-10A 200W SYSTEM POWER SUPPLY HPIB (option 001) Meterless Learn More

0-64VDC 0-50AMP CV/CC VOLTAGE & CURRENT Adjustable (Coarse & Fine pots) Two Analog Meters 208V-3 Phase 4-wire input - Very Good Condition (and Heavy) Learn More

Fully Functional Power Supply. 0-40V 0-50Amp. CV/CC Two Meters. Rack mount. Input 208 VAC, Single-Phase. Learn More

Power supply. 0-40VDC @ 0-30AMPS. Two meters, 230V-Input These are a little dirty & scratched but will be tested before sale. The Agilent 6268B series of onstant-voltage / constant-current power supplies achieve high efficiency, excellent regulation.

Learn More

0-10VDC 0-100Amp Constant Voltage . Constant Current - V & A MeteredHeavy Rack mount instrument Good condition

Learn More

Metered(2) 0-200VDC @ 25A. POWER SUPPLY Programmable with Controller / Pulse Timer 36"Hx22"x22" heavy, Input: 230V 16A 3-Ph 60Hz 5KW-Out Learn More