Power Transformer

Ensign - P020-2-016X Transformer, Power.

Captain Class - Center-tapped  

Power: 20VA.

Pri/Sec: 120/240

Secondary: Dual 8V 2.5A or single 16V @ 1.25A.

Construction: Low Profile semi-toroidal hum-bucking.

Mounting: PCB.

Dimensions: 35mm above board x 48mm x 57mm.

 

 

Learn More

Signal Transformers - 241-4-1775 Power Transformer. 

Primary: 115 VAC

Secondary 15VAC at 400mA.

Split-bobbin, High isolation. Low capacitive coupling.

Dimensions: 2.37" long x 1.25" wide x 1.37" high.

Mounting holes are 2" apart.

Primary: 5" wire leads.

Sec: 8" wire leads to 3-pin molex plug.

Weight: 7 oz.

Learn More

DALE - IPL-2329-11 Transformer.

Dual 60V 200mA.

Useful as an isolation transformer at 24 watt.

Mount: PCB 8 Pin.

Learn More

TR-11236 Transformer.

Input X1 & X2 = 120 VAC

Output Hi & H2 = 36VAC 250mA.

Mount: Chassis, Open Frame, 4 wire.

Marked: 64977-93-S

Dimensions: 2-1/3" wide x 2" deep x 2" high with 2-7/8" mount centers.

NSN 5950-00-804-4379

Learn More

Transformers, power. 5V at 1Amp. Marked 3527348. One side of the 5V secondary is soldered to frame externally, removable. Dimensions: 1.8" x 1.2" x1.4" high with 3 wires. Weight: 4oz. Learn More

Triad/Utrad - F142XP - Power Transformer, 4.5 KVA

Pri: 115V 50/60Hz

Manufacturer: Triad Magnetics< Series F              

Product Category: Power Transformers 

Primary Voltage Rating: 115 VAC   50/60 Hz           

Secondary Voltage Rating: 15 V 

Power Rating: 4.5 VA     

Mounting Style: Through Hole    

Dimensions: Length: 1.7 in, Width: 2.38 in, Height: 1.44 in            

Operating Temperature: 0 C to 130 C

Termination Style: Solder Pin     

Unit Weight: 7.499999 oz

Open Frame mounts on 2" centers (two holes 2" apart) New PC mount

New Old Stock

Learn More

New 8-Pin PCB mount TransformerNo other markings. Learn More

Transformer, power. Output: 32V 1.5Amp, 24VCT 1Amp. Enclosed. Mount: Panel., with four feet at 5-1/2" centers. Dimensions: 3-7/8" long x 3-5/16" deep x 4-5/16" high, plus 10 ceramic solder terminals (overall 5" high. New. Note: Marked Picker CT-86E-77 and 56K37. Learn More

SIGNAL TRANSFORMER INC - ST-3-10

10VCT@0.25A OR 5V@0.5A Soldered on Printed Circuit Board

Designed for the 2.4VA Split Bobbin PC Mount Dual Output Transformer for Royal Streetlamps

Dimensions: 2.8" x 1.7" x1.3" Tall.

Contains a full wave bridge and four resistors, 3 wires identified as "ON",  "C", &  "DIM".

ST-3-10 Xfmr: Pri:115V Sec:series 10VCT 250mA

Seconday Output: Parallel 5V 500mA.

Transformer measures 35x29x30mm

Learn More

Transformer. 4.4VA. Series 20VCT 220mA or parallel 10V 440mA. Mount: PCB 6 pin miniature. Learn More

Transformer. Off line switch mode. Mount: PCB. Package: 10 Pin. Learn More