Circuit Breaker

Eaton - Cuttler Hammer - Westinghouse - HMCP007C0 - Adjustable 21-70 Amps 3-pole MOTOR CIRCUIT PROTECTOR

• Ranges from 15-2500 amperes
• High‑speed "blow‑open" action
• Available for 600 VAC or 250 VDC systems
• Current ratings up to 2500A
• Outperform calculations listed in IEEE

Motor Circuit Protector; 3 Pole; Series C; K Frame; 600 VAC

480VAC -7Amp Continuous.

Trip Range: 21-70 Amp.

F-Frame.

UPC 786679150719

New Old Stock

TE Connectivity / Potter & Brumfield - W23-X1A1G-40 Circuit Breaker.

W23 Series - Single Pole

Thermal Push/Pull 40 Amp 250VAC

Voltage: 50VDC Max.

Mount: Panel Mount

UL, CSA Approved

Dimensions: See Attached Diagram

New Old Stock

Proudly Made in USA

SIEMENS P&B - W58XA4A12B-20 Circuit breaker.

SP 20Amp 250VAC/50VDC.

Thermal-type.

Single hole mount.

Recessed button can not be pulled out to disconnect circuit.

Continuously carries 100% of rated load.

Dimensions: 1.394" wide x 0.660" deep x 1.381" high, plus threaded bushing 0.292" long.

Contacts: 1/4" quick connect terminals.

Potter & Brumfield - W69X2Q1-2-30 Circuit breakers.

3P 30Amp 277VAC 50/60Hz.

Curve 2.

Mount: Panel, 4 holes at approximately 2.224" centers.

Dimensions: 2.228" long x 2.006" high x 1.513" deep, plus terminals.

Male 1/4" QC terminals.

Listed: UL/CSA.

TE Connectivity/AMP - Potter & Brumfield - 2-1393253-4 - W68-X2Q110-30 Circuit breaker.

Dual 30Amp 2-Pole 277VAC-max, 50/60Hz. Curve 10.

Type: Magnetic (Hydraulic Delay)

Mount: Panel.

Four hole mount: 2 top screw distance: 0.750" (19.05m) and distance between top and bottom screw: 1.660" (42.16mm).

Dimensions: Overall 1.500" (38.1mm) wide x 2.016" (51.2mm) Height x 1.640" (41.66mm) deep.

Listed: UL/CSA.

E-T-A (ETA) - 45-000-P-H - 2.5 Amp Circuit Breaker. SP 2.5Amp 250VAC

SP 2.5Amp 250VAC.

With reset button.

Mount: 2 hole panel, front flange 49.9mm long x 17.9mm wide and 40.0mm centers.

Dimensions: 31.2mm wide x 14.0mm x 49.5mm behind panel.

Contacts: (2) 1/4" male quick connect terminals.

Listed: UL/CSA.

Made in Germany

CUTLER-HAMMER - HMCP400W5W Circuit Breaker.

3 Pole 400Amp 600VAC/250VDC.

Family: Series C,  Nema Type 3, Molded Case.

Phase: 3

Poles: Three - Pole Magnetic Trip

Voltage: 600

Amperage: 400

Connection: Bolt-On

Protection: Magnetic Only

Functions: I - Instantaneous

AIC Rating: 35kA@480V

Frame Size: K Frame

Magnetic Trip Range : 1250-2500 Amp.

Motor Protector. - Approvals: UL, CSA

Dimensions: Height 10.13" X Length 4.1" X Width 5.5"

Weight: 11 Lb 5 Oz

Used / Removed From Equipment

Note: Difficult to find Item 

Made in USA

Sensata AIRPAX - 209-3-22848 - Circuit Breaker.

3Pole 60Amp 240VAC 50/60Hz.

Special Purpose not for general use.

Back Connected Stud Terminal.

Mount: Panel, Each Individual Breaker has 2 Mount Holes.

Overall Centers is approximately 3.5".

Dimensions: 3.1" wide x 5.125" high x 3.55" deep.

Note: T29-467.

Issue LN-1233.

New.

Sensata Airpax - 209-2-6467-4 - Circuit Breaker.

2Pole 240VAC 75Amp.

Mount: Panel.

Dimensions: Overall 2.072" wide x 3.55" deep x 5.125" high.

Use on Vertical Surface.

Marked for Special Use Only.

New.

AIRPAX - UPL211-1REC2-8966-1 Circuit breakers.

3 Pole 400Hz 8 Amp F.L., T.A.12

250VAC 400 cycle, delay 41,

AUX switch 10A-250VAC,

AUX coil 12VDC.

Additional Data: https://www.sensata.com/sites/default/files/media/documents/2018-04-26/ourproducts_apl_upl_series_datasheet.pdf

Sensata Airpax - PP11-62F-2.00A-24458-2-V

Hydraulic Magnetic Circuit Protectors (SNAPAK®)

2Amp Push - Pull Circuit Breakers

Single Pole

Switch Trip/Amp 2.00 Ampere

250VAC 50/60Hz

Frequency & Delay: Slow 50/60 Hz

(2) 1/4" male QC mounting and dress nut included

 0.680" x 1.375" x 1.960" behind panel

Weight 1.0 oz 

Highly Discounbted - New Old Stock

Additional Information: https://datasheet.octopart.com/PP11-62F-2.00A-24458-2-V-Sensata---Airpax-datasheet-68313446.pdf

Alternate: TE Connectivity W23-X1A1G-2

Proudly Made in USA

E-T-A - ETA - 1658-A00-00-P10-20A - Circuit Breaker. Type 1658, 20Amp 120/125VAC, 28VDC, Self Resetting.

Series: 1658       

Type: Thermal Overcurrent        

Current Rating: 20 A      

Voltage Rating AC: 120/125 VAC        

Voltage Rating DC: 28 VDC          

Number of Poles: 1 Pole

Actuator Type: Self-Reset            

Operating Temperature: - 20 C to + 60 C

Dimensions: Height: 14 mm, Length: 27 mm, Width: 32 mm        

Mounting Style: Panel Mount    

Termination Style: Blade     

Unit Weight: 1.304431 oz

Approvals: CSA C22.2 No 235, IEC 60934, UL1077, UL1500

ROWAN Controller Inc. - 2101-CPAOPAR Circuit Breaker, Pushbutton.

Contact Ratings: 1.5 Amp.

Actuator: Illuminated 120V lamp.

Connection: Solder.

Mech: Panel, Bushing Mount 0.75" D.

Body: 1.1234" wide x 1.018" long x 2.207" deep plus contacts.

Threaded bushing: 0.817" long (seated).

Lamp: GEB2A Bayonet Neon.

Push on/Push off.

Note, the closed contacts have a resistance of 1.8 ohms and 3.6 amps DC through this path will trip the contact mechanism immediately. Lower currents, in excess of 1.5 amp will trip more slowly. These electrical facts shall not be used to define any actual specifications on this device as a circuit breaker.

New Old Stock

Proudly Made in the USA. 

LITTELFUSE - 814020 Circuit Breakers.

A circuit breaker is an automatically operated electrical device designed to protect an electrical circuit from damage caused by overload or short circuit. Unlike a fuse, a circuit breaker can be reset (either manually or automatically) to resume normal operation. Automatic units are cycling and continuously self resetting, while the manual units are used where investigation of the fault is required prior to the circuit being reset.

Push Button Manual Reset (type III) with 90° bracket

24V 20 Amp.

Operating temperature: -23°C to 65°C.

Case: metal housing/shielding small 2-screw terminals.

Dimensions: 1-1/4" long x 3/4" wide x 5/8" tall.

New Old Stock

Applications: Automotive, Commercial, Industrial, Trailor Lighting 

GENERAL ELECTRIC - TED134020 Circuit Breaker.

General Electric, E150 Line, type TED, 3P, 3PH, 20A, 480V, 18kA@480V, complete with load side lug terminals, standard interrupting capacity, 40°C, bolt-on, thermal magnetic, molded case circuit breakers.

Sub-Category    Molded Case

Family: E150 Line

Type: TED

Phase: 3

Poles: 3

Voltage: 480 VAC

Amperage: 20

Frame Type: E150, Type TED

Functions: LI - Long-Time and Instantaneous

Connection: Bolt-On, Panel Mount

Protection: Thermal Magnetic

Functions: LI - Long-Time and Instantaneous

Current Interrupting Ratings: 18,000 Amp @ 240VAC or 14,000 Amp @ 480VAC Max RMS SYM

AIC Rating: 18kA@480V

Dimensions: 6.3" x 4.13" x 3.38".

UPC 0783116408242

Weight: Approximately 4 lbs 

Note: Used - Removed from Equipment

The item may have some signs of cosmetic wear, but is fully operational and functions as intended.

Made in USA

ETA - E-T-A - 1658-G21-00-P13 - 1658-G21-00-P13-12A - Thermal Overcurrent Circuit Breaker.

Very cost effective design to meet international requirements. No exposed metal parts which are, or could become, current-carrying except for terminals. R-type TO CBE to EN 60934.

SP 12Amp 250VAC.

Manual Pushbutton Reset.

Series 1658.

Mount: Panel.

Current Rating: 12Amp

Voltage Ratings: 240 VAC, 28 VDC 

Number of Post: 1

Dimensions: 1.279" Long x 0.561" High x 1.284" Deep including 1/4" Male QC Terminals.

Approvals: CSA C22.2 No 235, IEC 60934, UL1077, UL1500

Applications: Battery chargers, consumer products, power supplies, motors.

New Old Stock

Made in the USA.

E-T-A - 46-400-P-12 Thermal Circuit breaker.

12Amp 250VAC.

Push button Reset

Vintage ETA - New Old Stock

Made in Germany

Sensatec AIRPAX - UPGHX41-25462-1 - Circuit Breaker.

Status: Discontinued

2Pole 30Amp 250VAC with Shunt Trip.

Dual-Rocker, White.

Contacts: 6 - 1/4" Quick Connect Terminals.

Dimensions: 2" x 1.5" 2.5" behind panel.

AIRPAX - UPG6-1-62-402-C-91 Circuit Breaker.

Magnetic 1 Pole

4 Amp 277VAC, 50/60Hz.

Delay Trip 5 Amp.

AIRPAX - UPGH666-1-62-702-90 - Circuit Breaker.

3P 7Amp F.L.

250VAC 50/60 cycle.

Trip amps: 8.75

New Old Stock

Proudly Made in USA

AIRPAX - R21-61F-3.00A-B07CV Circuit Breaker, Rocker.

The Airpax™ SNAPAK® series is a snap-acting hydraulicmagnetic circuit protector that combines power switching and
accurate, reliable circuit protection in one aesthetically pleasing package. The SNAPAK® combines the functions of three separate components: power switch, fuse and fuse holder.

2 Pole 3Amp 250VAC.

Trip 4.05Amp. 50/60CY.

Delay P2.

0.25" Quick Connect Terminals

Proudly Made in USA

SENSATA - AIRPAX - UPL1-1RO-2433-3  Circuit breaker.

SP 10Amp 250V 50/60Hz.

Trip 12.5Amp. delay 62.

With auxiliary SPDT 10Amp switch.

Mounts on 2" centers.

Listed Ul/CSA.

Additional information: https://www.sensata.com/sites/default/files/media/documents/2018-04-26/ourproducts_apl_upl_series_datasheet.pdf

New Old Stock

SENSATA- AIRPAX - UPL11-11-674  Circuit breaker.

65VDC 25Amp.

Delay: 51.

Trip 31.1Amp.

New Old Stock

Additional Information: https://www.sensata.com/sites/default/files/media/documents/2018-04-26/ourproducts_apl_upl_series_datasheet.pdf

Sensata - Airpax - UPGH666-1-62-153190 Circuit Breaker.

Triple Circuit Breaker Magnetic - Hydraulic Delay

Reset Actuator Type: Lever

Mounting Style: Panel

3 Pole, 250VAC, 15 Amp, 50/60 Cycle.

Terminal Design: Screw

Operating Temperature: -40 to 85C

Long Delay: 62.

Trip Amp: 18.8

UL Recognized and CSA Certified