Fuse Holder

Fuse block. Holders 1P 20Amp 250V. Two QC connectors. Dimensions: 2-1/4" long x 13/16" deep x 1-1/8" tall. Learn More

Fuse holders. One (1P) single cartridge fuse holder, 30Amp 600V.. Wire connector style: screw with clip. Material: thermoplastic. Wire size leads: #10 - #18 Cu only. Dimensions: 6.25in.(L) � 1.54in.(W) � 1.73in.(H). Cross: R60030-1SR. More info: www.cooperbussmann.com/pdf/f5c2fe09-ea4a-4826-a3b1-7d5dc9a4fcf2.pdf Learn More

Surface mount fuse blocks for (8) eight 3AG Series fuses. 8-Pole. with 1/4" Quick connect terminals on a black bakelite board.Base is 124.4mm (4.9") x 41.2mm (1.624") x 5.1mm (0.204") high. (The contacts extend outward giving the overall dimensions 2.130" wide x 0.725" high). Learn More

SINGLE END FUSE CLIP FOR 3AG STYLE PC BOARD MT. (SILVER IN COLOR) $7.50/C Learn More

Micro Fuse Holder.  5A 125V. PCB Mount 2-pin. UPC 013227543120 

Learn More

Fuse Holder. 3P 60Amp 600VAC. Use class H & K fuses. Non-spring reinforced clips. Wire Range AL/CU #2-14. Double marked CU-AL. Learn More

Safety Device Co - 10645 Fuse Block / Holder.

For two 30A 250V cartridges.

Mount: Heavy Thermoplastic Flush Mount 3" x 2" x 1.25" high.

Listed: UL/CSA.

Product: Fuse Blocks

Fuse Size / Group: Class R

Type: Fuse Block

Mounting Style: Screw

Number of Poles: 2 Pole

Current Rating: 30 A

Voltage Rating: 250 V

Color: Black

Brands: Bussmann / Eaton /Cooper /Safety Devise Co.

Product Type: Fuse Holders

 Unit Weight: 3.2 oz

Note: Similar to Bussman R25030-2SR fuse holders.

Learn More

LITTELFUSE - 345701A / 03450701H

Fuse holder, 345 Series Panel Mount Enclosed Fuse Holder, ''Shock-Safe''

Electrical Rating: 20Amp 600VAC

3AG Black Body.

Red screwdriver slot cap (flush with holder) with slotted cap, no retaining nut.

Both Right Angle Terminals. 5x20 mm

Alternate 03450701H

 

Learn More

BUSSMANN - HLQ-1-6/10 - Fuse Holder

Body Material: Thermoplastic

Mount: Through Hole

Current Rating: 1.6 A

Termination: Wire

Voltage Rating (AC): 300 V

300VAC or less HLQ carrier comes with a 6" lead of 18AWG red insul solid copper attached to the line side, non-threaded.

Learn More

Cooper Bussmann No 616 Fuse holders. Buss reducers, 100 - 60Amp. Fuse reducers install in fuse clips to permit the installation of smaller size fuses than those for which the clips are designed. UPC 051712331111

• Fits into most panels/switches, including the dead-front type
• Strong contact is maintained both mechanically and electrically
• 100 Amp to 60 Amp, 600 Volts AC
• Fuse Reducer
• UL Class H & K
• Ferraz Fuse Reducers are Much Less Expensive
• Fits into most panels/switches, including the dead-front type
• Strong contact is maintained both mechanically and electrically
• UL Listed (GUIDE # IZZR, FILE #E12853)
• CSA Certified (CLASS 6225-01, FILE #47235)

One pair per box. UL/CSA Listed.

More info: http://www.bussmann.com/pdf/bcc23b41-30b4-49b9-b50c-d22097820f38.pdf

Learn More

Fuse, holder. Shock-safe 16Amp 250V. For 5 x 20mm fuses. Material: thermoplastic. Mount: PCB, horizontal. Dimensions: 1.262" (32.mm) long x 0.591" (15.0mm) wide x 0.597" (15.0mm) high. Color: black. Note: Marked 19830, 2,5W/10A and 16A 250V. Learn More

Fuse Holders Clips, Open Design for 5 X 20mm fuses.

Material: Solid Brass.

6.3 Amp, 500 VDC/500VAC

Operating temperature: -40 C to 85 C

Mount: PCB.

New Old Stock

Alternates: 0751.0052, OG0751.0052, BK-6005

Package of 20.

Learn More

Filter, power outlet 6Amp 250VAC plus fuse holder. 48-440Hz. 3 Conductor male ac plug. Listed: UL/CSA. Learn More

Fuse holders 600V 30A. Learn More

Fuses, holders. For 20A 250V fuses. Size: 1/4 x 1-1/4". Mount: panel. RoHS compliant. Learn More

60Amp 250V Fuse Holders Fuse Block New bulk and a tad dusty Only marked H25060-1S Black plastic Use class H fuses 60C/75C wire. Learn More

Eaton - Bussman - HPC-C - Fuse, Holder.

Bussmann 1-Pole Fuse holder in black color is made of thermoplastic for added durability. It has a maximum voltage rating of 600 VAC and current rating of 30 Amps.

Color: Black.

Ideal for 13/32" X 1-1/2" fuses.

Mount: Panel with 1-1/3" centers.

Dimension: 1.780 Inch Diameter x 2.690 Inch Length

Connection: 1/4" Quick Connect

The HPF series functionally replaces the buss® hpc series

New Old Stock

UL listed and CSA Certified

UPC: 051712740463 

Learn More

WAGO - 261-331 - Connector, DIN-rail Terminal Block CAGE CLAMP 4-conductor.

Standard (European) chassis mount, with fixing flange mount. Product group 9 (Standard Chassis )

Side entry: 28 - 14 AWG.

Strip length: 8-9mm / 0.33".

Current intensity: 24A EN. 10 x 18 x 28mm.

Screwless Clamping System.

Learn More

Hardware, fuse holder. Fuse Clip. For 5mm fuses. Single ended. Mount: PCB 2 pin. Package of 24. Learn More

Hardware, fuse holder. Fuse Clip. For 1/4" fuses. Single ended. Mount: PCB 2 pin. Material: brass. Learn More

FUSE HOLDER 60 AMP 600V FOR SINGLE FUSE( MARKED 60600 )6.75"L x 1.75"W x 2.0"H Learn More

Fuseholders. 2 Pole 60Amp 250V for Class H fuses. A2Y, CRN, NLN, NON, NRN, OT, OTN, RLN, RF. Wire awg; #2-#14 AWG CU, #2-#12 AWG AL. Dimensions: Thermoplastic 13/16" D x 3". UL/CSA listed.

Learn More

Fuse holder. 30Amp 600V. Mount: panel 1/4" QC terminals. Used/removed from equipment. Learn More

Littelfuse - H345601 Fuse Holder.

Categories          Circuit Protection Fuseholders  

Manufacturer    Littelfuse Inc.    

Series    345        

Mounting Type: Panel Mount     

Fuse Size: 1/4" Dia x 1 1/4" L (6.4mm x 31.8mm)

Current Rating (Amps): 20A        

For Use With/Related Products  3AG      

Fuse Type: Cartridge      

Fuseholder Type:  Holder             

Number of Circuits           1             

Voltage:               600V     

Termination Style:  Quick Connect - 0.187" (4.7mm)        

Contact Material: Brass

Contact Finish:  Tin

Learn More