Line Filter

Mini Circuits Labs - BHP-50 Coaxial High Pass Filter.

Rugged Shielded Case

50 Ohm 41-800Mhz,

BNC Male to BNC Female.

Dimensions: 

Applications: Lab Use, Transmitters/Receivers, Radio communications

New Old Stock

More info: https://www.minicircuits.com/WebStore/dashboard.html?model=BHP-50%2B

TE Connectivity / Corcom - PE0S0DLXC - EMI Filter Power Switch

10A/40ºC, 120/250V, 50-60HZ , Mount - Snap In or Flange Panel, Quick Connect, UL, CSA, VDE Approved,  

Datasheet: http://datasheetz.com/data/Connectors/Power%20Entry%20-%20Modules/PE0S0DLXC-datasheetz.html

SCHAFFNER - FN-372-6 - 6Amp AC Power Line Entry Module / EMI RFI Fused Filter

Schaffner Line Filter 6Amp with Dual Fuse Holders, AN IEC 320 inlet. 2- 0.18mHy 2 x 2200pF,

Panel Mount, Solder Lug, Weight  2 Oz, Max Voltage 250V 50/60 Hz, MTBF @ 40C/230V (Mil-HB-217F) 550,000 hours,

UL, (Fuses purchased separately), 

Connector Style IEC 320-C14        

Connector Type Receptacle, Male Blades - Module              

Current - UL        6A          

Voltage - UL        250VAC Max.

Filter Type           Filtered (EMI, RFI) - Commercial

Accomodates a Fuse       Yes (Not Included 20mm x 5mm 6 Amp)

Number of Positions       3 Power Inputs    (100, 120, 220 VAC Drum Selectable).        

Mounting Type Panel Mount, Snap-In   

Termination       Quick Connect  

Features              Voltage Selector              

Fuse Holder, Drawer       Fuse Holder, Twin Fused              

Panel Cutout Dimensions       28.5 x 56mm     

Panel Thickness 0.031" ~ 0.126" (0.79mm ~ 3.20mm)      

Material Flammability Rating      UL94 V-2             

Ingress Protection           IP40      

Approval Agency              CSA, UL, VDE

Made in Switzerland with Germany Components

Typical Uses - Electrical Equipment, Consumer goods, EDP and office equipment, Single-phase Power supplies,, Switch mode power supplies, Test and measurement equipment, & medical equipment.

Schaffner - 1FN610-6/06 Filter, line.

6Amp 110/250VAC 50/60Hz/HPF (2 x 0.75mH).

Operating Frequency: DC to 400 Hz

Enclosed.

Operating Temperature: -25 to +85 C.

Dimensions: 1.313" long x 1.746" deep x 0.75" high, with 1/4" male QC terminals.

Alternate: FN2010-6-06

SCHAFFNER - FN372-2/A - Filter, Power Entry Module.

The FN 370 power entry module combines an IEC inlet, a mains filter with a single or dual- fuse holder
and a voltage selector. Choosing FN 370 product line brings you the rapid availability of a standard filter
associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution
helping you to pass EMI system approval in a short time.

Connector Style: IEC 320-C14

Connector Type: Receptacle, Male Blades - Module

Current – UL: 2A

Voltage – UL: 12.5/250VAC

Filter Type: Filtered (EMI, RFI) - Commercial

Accommodates a Fuse: Yes

Number of Positions: 3

Mounting Type: Panel Mount, Snap-In

Termination: Quick Connect

Panel Thickness: 0.031" ~ 0.126" (0.79mm ~ 3.20mm)

Material Flammability Rating: UL94 V-2

Ingress Protection: IP40

Approval Agency: CSA, UL, VDE

Applications: Portable electrical and electronic equipment,Consumer goods,EDP and office equipment
Single-phase power supplies, switch-mode power,supplies,Test and measurement equipment Medical equipment. 

Made in Switzerland & Germany

SCHAFFNER EMC - FN 363-4/01 Filter.

Voltage/Current Ratings: 4Amp 110/250 50/60Hz.

Max. voltage: 250 VAC

Termination Method: Spade/Solder

Number of Contacts: 3 Prong Plug

Mounting: Flange

Gender: Male

Filter: HPF 4A. 0.047uF(X2)SH 2x00.48mH. 400uH 2 x 2200pF(Y).

Operating Temp.: -25 to 85 C

With AC Power Outlet.

Made in Switzerland

New Old Stock

ECS INC - ZTA-3.58MG - Filter/Resonator.

Ceramic Resonator 3.58MHz,

Impedance: 30 Ohm. Tolerance: 0.5%.

Supply Voltage: 100V

Dimensions: 10mm wide x 5mm deep x 7.5mm High.

Package: 2 Pin Radial Leads.

Lead Spacing: 5mm.

Note: Extended Temperature Range.

Additional Information: https://ecsxtal.com/store/pdf/ZTAR.pdf

Package of 10.

TE Connectivity / AMP / CORCOM - 20ESK6, F7585 Filter, AC line.

SK Series, Status: Active

EMI & RFI 20 Amp 120/250V 50/60Hz, 10kHz-30MHz SEV VDE UL544.

Low Leakage

Operating Temperature: -10C to 40C

Inductance: 0.06 mH  

Housing: Chrome.

Mount style: Flange 2-holes 4.0"spacing.

Connections: Threaded Bolts 8-32 Torque 18lbf-in (2.03 M-m) Max.

UPC: 061068421787

Alternate: 20ESK6=F7585 S0, AMP 1-6609035-3

Dimensions: 5.09" Long x 2.25" Wide x 1.78" High, with Stud Contacts.

Each is Test Dotted. Weight: 1.2 lbs without packaging.

Application: Electro-Mechanical Noise, Switching Power Supplies.

RoHS Compliant.

Factory New

SCHAFFNER - FN322-3/05 - Performance EMI Filter.

3 Amp 110/250V 50/60Hz

HPF, 2 x 2mH, 0.015uF(x2) 2 x 2200pF (Y).

With a male 3 conductor male universal input.

Potter USA - 5000-3023 Filter, Line.

150Amp 100VDC, 2.5f @ 125Deg C.

Enclosed, Steel.

Mount: Single Hole, Centered Flange on top.

Dimensions: Overall 0.90" D x 3.380" long, including threaded stud at each end.

Proudly Made in USA

Vintage - New Old Stock

Mini Circuit Labs - BBP-21.4 - Lumped LC Band Pass Filter, 19.2 -23.6 MHz, 50 Ohm.

Coaxial bypass filter.

BNC male to female.

Low insertion loss

Rugged shielded case

Operating temperature -55C to 100C

RF Power Input 0.5W max.

Applications: High rejection applications, image rejection, & IF signal processing.

RoHS Compliant

More info: http://www.minicircuits.com/pdfs/BBP-21.4+.pdf

Filtron - FA965B RF/EMI Line Filter Module.

20Amp 100VDC.

RF Interference.

Type FA965B.

Mount: Panel with two tabs at 2.4" centers.

Dimensions: 2.027" square x 1.140" high.

Two screw contacts, one each side. 1 terminal in / out

Twice the current capability of Bendix / Sprague (FRI) B778585 

New Old Stock 

Made in USA

CORCOM - 5B4 EMI Filters 5 Amps 115V/230V

Power Line Frequency rating per function: 400.0 !st radio interference.

Priincipla circuitry: inductance Capacitance 1st Radio interference.

Mounting 2 Threaded holes - 0.138"

Operating voltage and type per function:  230.0o VAC radio Frequency 2nd function.

Dimensions: 0.750" x 2.000"

Body Material: Metal

Output/Input impedance per functio: 50.0 Ohms 1st and 2nd Radio Interference.

Max. dielectric withstanding DC voltage: 2.1Kvolts at sea level

Operating current rating per function: 5.0 Amp Radio Interference.

distance between centers of mount: 1.50" Nominal 

NSN:5915-01-005-0048 

Delta 02DBAG5 - EMI Line FIlter, General Purpose

2Amp 250VAC.

Filter Type: Single Phase

Voltage 115/250VAC

Current: 2 Amp

Inductance: 2.1 mH

Mounting: Chassis Mount

Termination: Quick Connect Flange

New Old Stock.

Listed: UR, CSA, VDE.

Alternates: Newark 99Y7779 

Made in Taiwan

SURGE CONTROL LTD - SPP-2204D Transient Suppressor & Filter.

15Amp 220VAC 50/60Hz.

Design Exceeds ANSI/IEEE C62.41-1991 CAT.B and IEC 801-4 Level 4 Specifications.

5-Screw Terminals = Ground + Line In + Neutral In + Line Out + Neutral Out

New Old Stock

SCHAFFNER - FS3184-6-16 - Line Filters

110/250VAC 6Amps

Each with wiring harness

Note: Removed from Equipment

Potter USA - 600A10 Filter, EMI.

10Amp 250VAC.

New Old Stock.

Listed: UL/CSA.

Alternates: TE Connectivity 10VR1, 10VB6, 10ER1, 10VK1

Proudly Made in USA